SITC of electrical LT PCC panel extension , LT distribution subpanels and allied system for operation of additional Trommels at SLF Ghazipur

Amount

SUB-HEAD-1.0 L.T CABLES Supplying following 1.1kv grade XLPE aluminium / copper conductor PVC insulated/PVC sheathed armoured cable as per as per IS:7098 Part II & Technical Specifications as required. 3.5 core, 120 sq.mm. Alu. Armoured

3.5 core, 240 sq.mm. Alu. Armoured

3.5 core, 300 sq.mm. Alu. Armoured

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm dia. R.C.C. pipe

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required.3½ X 120 sq. mm (45 mm)

3½ X 240 sq. mm (62 mm)

3½ X 300 sq. mm (70 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend,couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i) 160mm dia.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.i) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level ( i) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: i) Cement mortar 1:6 (1 cement : 6 coarse sand)

CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix i) 1:6 (1 cement: 6 coarse sand)

6 MM CEMENT PLASTER i) Neat cement punning

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required i) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Sub-Head 2.0 Panels And Sub- Panels Design, Supply, Unloading, Installation, Testing & Commissioning of LT Power Control Centre (PCC) Panel Extension (INDOOR TYPE) To be coupled with Existing LT PCC Panel (1000A): 800A FP MCCB-50KA -M/P TYPE X 01 No ROTARY HANDLE FOR-DN4-4POLE SPD. LINK FOR-DN4-4P 630A FP MCCB-36KA -THERMAL TYPE X 01 No ROTARY HANDLE FOR-DN3-4POLE SPD. LINK FOR-DN3-4P AUX. CONTACT FOR MCCB 100A FP MCCB-30KA -THERMAL TYPE X 01 No. SPD. LINK FOR MCCB-4P ROTARY HANDLE FOR- MCCB4POLE INDICATION LA MPS -ON-OFF MULTIFUNCTION METER X 03 No CT FOR MF METER - CL-1, TAPE WOUND TYPE X 03 No. CT FOR MF METER - CL-1, TAPE WOUND TYPE X 03 No CT FOR MF METER - CL-1, TAPE WOUND TYPE X 03 No. CONTROL SP MCB X 12 No. NEUTRAL LINK WIRE 1/1.5 SQ MM WIRE 2.5 SQ MM * ALL O/G MCCB THERMAL MAGNETIC TYPE UPTO 630AMP. PANEL 14/16 SW- WITH 75MM BASE HARDWARE + PVC SLEEVES + DMC SUPPORTS / SUPPORT INSULATORS + ANGLES + LOCKS + HINGES + EARTHING + BAKELITE + PVC CHANNEL + GASKET + LEGENDS +INSULATOR, ETC., +MISSLEN *MAIN ALU BUSBAR- 1200 AMP FOR PHASE *MAIN ALU BUSBAR- 600 AMP FOR NEUTRAL *14SWG FOR LOAD BEARING AND 16 SWG FOR NON LOAD BEARING PART

Design, Supply, Unloading, Installation, Testing & Commissioning of LT Distribution Panel (800A) (OUTDOOR TYPE): 800A FP MCCB-50KA -M/P TYPE- I/C x 01 No. ROTARY HANDLE FOR-DN4-4POLE SPD. LINK FOR-DN4-4P 250A FP MCCB-36KA -THERMAL TYPE x 02 No.s SPD. LINK FOR-DN2-4P ROTARY HANDLE FOR-DN2-4POLE 63A FP MCB x 04 No.s CT FOR MF METER - CL-1, TAPE WOUND TYPE 800/5A x 03 No.s INDICATION LAMPS -R-Y-B -ONOFF AUX. CONTACT FOR MCCB MULTIFUNCTION METER X 01 No. CONTROL SP MCB x 04 No. NEUTRAL LINK WIRE 1/1.5/2.5 SQ MM PANEL 16 SWG- WITH 75MM BASE ALUMINIUM BUSBAR 1000A/500A (P/N) HARDWARE + PVC SLEEVES + DMC SUPPORTS / SUPPORT INSULATORS + ANGLES + LOCKS + HINGES + EARTHING + BAKELITE + PVC CHANNEL + GASKET + LEGENDS +INSULATOR, ETC., +MISSLEN. POWER WIRE + LUGS FOR WIRING IN PANEL

Design, Supply, Unloading, Installation, Testing & Commissioning of LT Distribution Panel (630A) (OUTDOOR TYPE): 630A FP MCCB-36KA -THERMAL TYPE X 1 No. ROTARY HANDLE FOR-DN3-4POLE SPD. LINK FOR-DN3-4P 250A FP MCCB-36KA -THERMAL TYPE x 02 No.s SPD. LINK FOR-DN2-4P ROTARY HANDLE FOR-DN2-4POLE 63A FP MCB x 04 No.s CT FOR MF METER - CL-1, TAPE WOUND TYPE x 03 No.s INDICATION LAMPS -R-Y-B -ONOFF AUX. CONTACT FOR MCCB MULTIFUNCTION METER X 01 No. CONTROL SP MCB x 04 No.s NEUTRAL LINK WIRE 1/1.5/2.5 SQ MM HARDWARE + PVC SLEEVES + DMC SUPPORTS / SUPPORT INSULATORS + ANGLES + LOCKS + HINGES + EARTHING + BAKELITE + PVC CHANNEL + GASKET + LEGENDS +INSULATOR, ETC., +MISSLEN. ALUMINIUM BUSBAR 800A/400A (P/N)

Design, Supply, Unloading, Installation, Testing & Commissioning of LT Distribution Panel (250A) (OUTDOOR TYPE): 250A FP MCCB-36KA -THERMAL TYPE SPD. LINK FOR-DN2-4P ROTARY HANDLE FOR-DN2-4POLE INDICATION LAMPS -R-Y-B -ONOFF AUX. CONTACT FOR MCCB CT FOR MF METER - CL-1, TAPE WOUND TYPE x 03 No.s MULTIFUNCTION METER x 01 No. 63A FP MCB x 04 No.s CONTROL SP MCB x 04 No.s NEUTRAL LINK WIRE 1/1.5/2.5 SQ MM HARDWARE + PVC SLEEVES + DMC SUPPORTS / SUPPORT INSULATORS + ANGLES + LOCKS + HINGES + EARTHING + BAKELITE + PVC CHANNEL + GASKET + LEGENDS +INSULATOR, ETC., +MISSLEN. ALUMINIUM BUSBAR 300A/150A (P/N)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.i) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for i) Columns, Pillars, Piers, Abutments, Posts and Struts

Sub-Head 3.0 EARTHING Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. Nut bolt & spring washer spaced at 50 mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

SACHDEVA ELECTRICALS

ACE ENGINEERS BUREAU