Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
3 Oct 2026, 6:00 pm
Maj Vivek Sharma
GE MH AND RH KHADKI Pune 411003
REPAIRS TO HARDSTANDING, COMPOUND WALL, FENCING, GATES, DRAINS, FOOT PATHS AND MISC WORKS AT INSPECTION ORGANIZATION, AUNDH UNDER GE (MH AND RH) KHADKI
2026_MES_789106_1
8841/E8
Open Tender
Civil Works
Item Rate
270 days
GE MH AND RH KHADKI
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
₹46,000
12 Sept 2026
12 Sept 2026
5 Oct 2026
12 Sept 2026
3 Oct 2026
26 Sept 2026
12 Sept 2026 - 3 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified | 31 | Cum | - | - |
| 2 | M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed. | 26 | Cum | - | - |
| 3 | All as per item No 2 above but except block recovered from demolition all as specified and directed. | 5 | Cum | - | - |
| 4 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. | 30 | Sqm | - | - |
| 5 | M&L for rendering 15mm thick on old/new fair faces of brick work or concrete surfaces in cement morter 1:4 complete all as specified and as directed. | 50 | Sqm | - | - |
| 6 | M&L for rendering 15 mm thick factory-made, polymer-modified, ready-mix cement plaster consisting of Ordinary Portland Cement conforming to IS 269/IS 8112/IS 12269, well-graded washed silica sand conforming to IS 2116, and performance-enhancing additives/plasticizers. The material shall be factory batched under quality-controlled conditions and supplied in sealed moisture-proof bags. The plaster shall be mixed only with the quantity of clean potable water recommended by the manufacturer using a mechanical mixer and applied over properly prepared, cleaned, wetted and hacked masonry/RCC surfaces. The plaster shall be applied in a single coat of 15 mm thickness on wall surfaces, properly ruled, leveled, floated and finished smooth using a steel trowel. The surface shall be free from cracks, hollowness, waviness, segregation, pinholes and other visible defects complete all as specified and directed by Engr-in-Charge. | 200 | Sqm | - | - |
| 7 | M&L for preparation of old/new undecorated surface of wall and applying two coats of cement base paint over a coat of primer. | 450 | Sqm | - | - |
| 8 | Dismantling fencing, wire mesh any type complete all as specified and directed by Engr in Charge | 258.3 | Sqm | - | - |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed by EIC. | 9.32 | Qtl | - | - |
| 10 | S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 | 931.52 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
T8841.pdf
Tender Documents • 1.00 MB
BOQ_884554.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .