SPECIAL REPAIRS TO BUILDING NO P17 QTR NOS 01 TO 04 AT NFG UNDER GE CHENNAI

Amount

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, laying cable etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, laying/ spreading in trenches clean dry sand to required width and depth at bottom and top of cable including spreading, levelling, punning for laying/ cushioning of cable all as specified and directed. Note: Punned thickness only will be considered or payment.

M&L for treatment of soil under existing floors using emulsion @ 1 ltr/hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all a specified and as directed.

M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in cooking platform complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in roof slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L for RCC M-30 (Design mix) using 20mm and below graded stone aggregate as in chajjas complete all as specified and directed.

M&L for reinforced cement concrete (1:1½:3) using 20mm graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers, landings, chullah hoods, chajjas with plain faces set in cement mortar (1:4) complete all as specified and directed.

Supply only Integral water proofing compound

Cutting holes in into or through brick wall for inserting hold fasts etc., depth of embedded portion of holdfats exceeding half brick but not exceeding one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for concreting of holdfasts complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

S&L Well burnt brick subclass 'B' in trenches for cable protection of UG Cable complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick of flat for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide flat for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of chullah hoods, chajjas, trough and other similar items including edges (rough finished flat surface of concrete) complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc. 4sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, supplying and fixing in frame at site complete all as specified, directed and shown in sketch for item No. 8103 in SSR Part-II.

S&F for 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 35mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

M&L for 40mm thick flush door shutters, solid core construction, with block board core and plywood face panel, commercial type on both sides etc., complete all as specified and directed.

S&F of Ist class hardwood handrail of size 100 x 75mm rounded or shaped with splayed in stright length and fixed in position complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long all as specified and as diercted.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified and directed.

S&F continuous piano hinges mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F extruded aluminium alloy handles cast type anodised 100mm size all as specified and directed.

S&F extruded aluminium alloy handles cast type anodised 150mm size all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples including taking out old damaged wire mesh with beading etc. complete all as specified and directed.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F in repairs floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F in repairs mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete all as specified and as directed.

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F locks, drawers, cupboards, shutters grade -I siz e75mm brass (two levers) complete all as specified and as directed.

M&L for 40mm brass dia cupboard knob fixed with nuts, screws and washers of mild steel bright finished complete all as specified and as directed.

S&F in repairs hasp and staple 125mm long , aluminium anodised safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F aluminium powder coated sliding windows (minimum thickness of powder coating 50 micron) using aluminium sections weighing not less than 0.49 Kg/RM for frame and 0.48kg/Rm for sliding shutters including fixed with aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips and one for aluminium wire mesh shutters etc., ( The rate is inclusive of all fixing and fittings of necessary builders hardware such as wire mesh, hinges, locking arrangements, joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beads, screws, etc. complete all as specified and directed.

S&F aluminium powder coated ventilators (minimum thickness of powder coating 50 micron) using aluminium sections weighing not less than 0.48 Kg/RM for frame, louvers, aluminium anodised snap beads, screws and fixed alongwith 5mm thick pin headed glass fixed with glazing clips and one for wire mesh sutter fixed on frame etc., ( The rate is inclusive of all fixing and fittings of necessary builders hardware such as wire mesh, hinges, bow handles, locking arrangements, joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beads, screws, etc. complete all as specified and directed.

S&F brass chromiun plated stainless stel towel rail, 20mm dia , 'D' type 600mm long between flanges and fixed in repairs complete all as specified and as directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and spintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for 8mm dia mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

S&F Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work confirming to FE 290 Gde-E-165 complete all as specified and directed.

M&L for 18/ 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to timber frame work with screws complete all as specified and directed.

M&L for 6mm thick external teak wood lipping over particle board fixed with nails complete all as specified and directed.

M&L for APP modified prefabricated polymeric membrane, 3mm thick of weight not less than 3.6Kg/Sqm reinforced with non-woven polyester matt, black finished on cold sticker and torch application of membrane with 10cm over lap after necessary preparation of roof surface as per manufacturer's instructions including water proofing treatment consisting of the following all as specified:- (i) One coat of bitumen primer @ 0.40 Kg/Sqm. (ii) One coat of bonding material of blown type bitumen of grade 85/25 heated with working temperature of 45°C and applied @ 1.20 Kg per square meter of the surface area. (iii) A layer of APP modified polymeric membrane of specified thickness and weight. (iv) Top most layer of surface finished with one coat of heat resisting aluminium paint.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 20mm stone graded aggregate 25mm thick as in leveling sub base complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm stone graded aggregate as in plinth protection complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc. including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and as directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L rendering 5mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:3) mixed with water proofing compound and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per item No. 68.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No. 70.00 above for work on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed in neat grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of cement mortar (1:3),20mm thick for laying floor finishes complete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in skirting, dados and risers as in steps etc., laid over cement screed and jointed in neat grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing set in cement mortar (1:3), 20mm thick complete all as specified and as directed.

M&L for 20mm thick machine cut granite slab (of any type), laid in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigments to match with the shades of granite stone as in platforms/ cooking tops and like including cutting and polishing etc. and including screed bed or bedding layer of CM (1:6), 20mm thick complete all as specified and directed.

Rounding to edges of stone slabs, such as in steps, cooking paltform and similar situations complete all as specified and directed.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer on old plastered walls, including 2 mm thick wall care putty complete all as specified and directed.

M&L preparation of old plastered surface of ceiling and applying one coats of white wash complete all as specified and directed.

M&L preparation of old plastered surface of walls and applying two coats of white wash complete all as specified and directed.

M&L for Applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade(company Depot tinted) with slicon additives @ 1.43litre/10sqm over and including primer appplied @ 0.90litre/10sqm over new surface complete all as specified and directed.

M&L preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer including 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered surface of walls and applying one coats of Weather coat exterior walls over a coat of primer on old plastered walls complete all as specified and directed.

M&L preparation of surfaces of steel surfaces, treating small articles such as stop, covers, gully graings, holdfasts, end of posts, backs of chowkats etc area not exceeding 0.1sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based material, treating ends of posts, backs of chowkats etc, area tarred exc 0.1 Sqm but not exceeding 0.5 Sqm each complete all as specified and as directed.

M&L for preparation of new wooden or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old wooden or wood based surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old steel surfaces of any description not otherwise described over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including breaking the existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including breaking the existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floors or trenches including breaking the existing pipe and taking out complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed floors or trenches including breaking the existing pipe and taking out complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bend any radius with access door all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) bend any radius with access door all as specified and directed.

S&F in repairs PVC (SWR) vent cowl suitable for 110mm dia vent pipe all as specified and directed.

S&F in repairs PVC (SWR) branch piece single 'Y' equal or unequal 110mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single 'Y' equal or unequal 75mm bore with access door complete all as specified and directed.

S&F taking up or down the existing GI tubing 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F taking up or down the existing GI tubing 20mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and laying 16mm bore CPVC pipes SDR 11 and plain SDR 11 fittings on wall/ ceiling or laying in floor complete all as specified and directed.

Supply and laying 20mm bore CPVC pipes SDR 11 and plain SDR 11 fittings on wall/ ceiling or laying in floor complete all as specified and directed.

S&F 500 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 20mm bore brass valve pipe high pressure with polyethylene float and fly nut complete screwed for iron pipe and fixed in repairs complete all as specified and directed.

M&L Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20mm dia bore pipes and fixed in repairs all as specified and directed

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F 15mm dia brass stop valve chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F in repairs 15mm PVC connection 450mm long of superior quality all as specified and directed.

S&F Brass chromium plated shower rose of size 75mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe and complete all as specified and directed fixed in repair.

S&F Grating round 140mm size of PTMT (Minimum weight 50gms) in repairs complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in the ends of bracket or erecting stand excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. complete all as specified and directed.

S&F PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed including removal of existing cistern etc.

Supply and fix plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs towel ring of fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and directed.

S&F in repairs stainless steel 1mm thick kitchen or laboratory sink overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm with out draining board with waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets complete all as specified and directed.

S&F soap dish, matt finished, chromium plated (MCH/ colour CP) as per Cat No. AKP-35731P of Jaquar all as specified and directed by Engr-in-charge.

S&F in repairs 15mm dia chromium plated angle cock with flange as per Cat No. FUS-29053 of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs tumbler holder with glass as per Cat No. AKP-35741P of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated two way angle cock with flange as per Cat No. 7311 of prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair CP waste coupling heavy (full thread) 32mm as per CAT No. ALD - 705 of Make : Jaquar or equivalent from other makes specified in particular specificationscomplete all as specified and as directed.

S&F 15mm dia chromium plated washing machine bib cock with flange, as per Cat No. 7305 of prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs CP wall mixer (2 - in - 1) with L bend (provision for over head shower) as per CAT No. FUS29273UPR of make : Jaquar or equivalent from other makes specified in particular specificationscomplete all as specified and as directed.

S&F in repairs health faucet (hand shower) with 1.0metre long flexible tube with wall hook, chromium plated as per Cat No. ALD-565 of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs toilet paper holder with flap recessed type matt chromium plated as per Cat No. AKP-35753PS of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs glass shelf matt finished, chromium plated (MCH/ Colour CP) 600mm long with bracket and fittings as per Cat No. ACN-1171N of make prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated bib cock long body with flange plate as per Cat No. CON-107KN of make Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs CP concealed stop cock regular body 15mm size with flange plate as per Cat No. FUS-29083K of Jaquar or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repair stainless steel plate rack of size 31" x 36" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-348 or equivalent from other makes specified in Particular Specifications.

S&F in repairs corner glass shelf superior quality, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. CAN-1173 of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs cockroach trap of size 127mm x 127mm with waste hole, chromium plated as per CAT NO> FT - 25 of make prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors, (other than ground floors) beams,staircases, landings, chajjas mand other similar suspended works complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. including removal of debris to outside MD land complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Dismantling boarding of any description fixed ain any position with nails or screws etc., complete all as specified and as directed.

Removing the building materials etc., obtained from demolition (other than soil obtained from excavated) to outside of MOD land to a distance of 2 KM as complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified.

Dismantling Un-framed timber scantlings 40 Sqcm and over in section and in any position (for hand rail) complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling rose, pendant, regulator sockets etc., to be measured separately) all as specified and as directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One ceiling Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

One light point controlled by two 2 way switch

One bell/buzzer point controlled by one bell push

One socket outlet 3 pin 15 Amps controlled by one switch independent board with cable 2.5 Sqmm size. (Two run ) and 2.5 Sqmm (one run) all as specified and as directed.

All as per Item No. 146.07 above but 4 Sqmm for AC and Geyser point.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F switch piano, flush type, single pole, two way, 5 Amps, 230 volts all as specified and directed.

S&F bell push 5 Amps, 230 Volts, flush type all as specified and as directed.,

S&F call buzzer/bell of multi music type A/C 230 Volts complete all a specified and as directed by the Engr-in-charge.

S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and directed.

S&F socket outlet 3 pin, 15 Amp, flush type, 230 volts all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

S&F LED light fitting 20 watts basic all-purpose surface and wall mounted LED batten 20 Watts with aluminium housing and integrated electronic driver including 20W LED tube- 1 No on surface of wall or ceiling including taking down old fittings complete all as specified and as directed. Make: Crompton cat No. CCS-103-20-65-SL-DP-NWH or equivalent from Havells/ Philips/ Wipro.

S&F LED light fitting 10 watts basic all-purpose surface and wall mounted LED batten 10 Watts with aluminium housing and integrated electronic driver including 20W LED tube- 1 No on surface of wall or ceiling including taking down old fittings complete all as specified and as directed. Make: Crompton cat No. CCS-103-10-65-SL-DP-NWH or equivalent from Havells/ Philips/ Wipro.

S&F 18 watts round surface mounted LED panel PDC aluminium housing and very high translucent frosted plastic diffuser makes it a robust luinaire efficacy 100 lm/w for installation on surfaces of wall or ceiling including taking down the old fitting complete all as specified and as directed. Make: Crompton cat No. LCDSPLN-R-18-NW or equivalent from Havells/ Philips/ Wipro.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit Concealed in wall medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable of Green color as earth continuity conductor and including Taking down old unservicable sub main complete all as specified and as directed by the Engineer-in-Charge

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit Concealed in wall medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable of Green color as earth continuity conductor ncluding Taking down old unservicable sub main complete all as specified and as directed by the Engineer-in-Charge

S&F MCB distribution board made of 1.2mm thick special CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, double door fixed in switch boards/wall at various places of capacity 240 Volts, 12 way MCB DB, SPN with 200 Amps rated bus bar conforming to IP 38 protection complete including taking down the old unserviceable all as specified and as directed.

S&F MCB distribution board made of 1.2mm thick special CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, double door fixed in switch boards/wall at various places of capacity 415 Volts, 6 way MCB DB, SPN with 200 Amps rated bus bar conforming to IP 38 protection complete including taking down the old unserviceable all as specified and as directed.

S&F MCB TPN of rating 16 KA, 63 Amps complete including taking down the old unserviceable all as specified and as directed.

S&F MCCB of rating 415 Volts, 16 KA, 4 pole 125 Amps complete including taking down the old unserviceable all as specified and as directed.

Supply, fix, MCB single pole, 6 to 32 Amps, including taking down the existing one complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 Amps, 230 Volts complete all as specified and directed.

Taking down carefully water heater storage type complete and deposit to E/M Store and supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connecton piece etc all as specified and directed

Taking down old serviceable existing Electric Meters and keep in safe custody incl refixing in same location/Quarters all as specified and directed

Taking down and supply and ceiling fan with blades, down rods, electronic regulator and accessories, 230V, 1200 sweep. Five star rated with bruchless direct current motor complete and old fan deposite to E/M store complete all as specified and directed by Engr-in-charge.

Taking down and supply and fix exhaust fan, steel body AC single phase, 230V of size 300m sweep with, blades and frame and louvers complete and old fan deposite to E/M store complete all as specified and directed by Engr-in-charge.

Supply and Fixing in trenches by suitable clamps and jointing complete GI Pipe medium grade size 25mm incl taking down unserviceable old pipe complete all as specified and directed.

Supply and Fixing in trenches by suitable clamps and jointing complete GI Pipe medium grade size 32mm incl taking down unserviceable old pipe complete all as specified and directed.

Supply and Fixing in trenches by suitable clamps and jointing complete GI Pipe medium grade size 50mm incl taking down unserviceable old pipe complete all as specified and directed.

S&F 25mm gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or, for union and fixed incl taking down unserviceable gate valve complete all as specified and directed.

S&F 32mm gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or, for union and fixed incl taking down unserviceable gate valve complete all as specified and directed.

S&F 50mm gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or, for union and fixed incl taking down unserviceable gate valve complete all as specified and directed.

Supply & Lay in trenches fixed on walls or passing through pipes/in floors connecting up testing and commissioning of XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade of size 50 sqmm 3.5 core incl taking down old unserviceable cable complete all as specified and directed.

Supply & Lay in trenches/ fixed on walls by suitable clamps and jointing complete GI pipe light grade sizes 50mm in repairs complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.3mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth strip of size 25mm x 4mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR part I (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 32mm bore light grade GI protection pipe for earth strip including PCC (1:3:6) type C1 pit with 40mm thick precast RCC (1:2:4) type B-1 cover reinforced with 8mm dia MS bars @ 100mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., testing on completion including dismantling existing earthing complete all as specified and as directed.

SHRI BALAJI CONSTRUCTIONS

M/s.Sai Agency

SIRITEL SYSTEMS PRIVATE LIMITED

DJ Group

G.L.THIRUMALAI NAIDU AND COMPANY

BALA BUILDERS