GE/863/EWS-T-30 OF 2024-25

Amount

Demolition of stone/ boluder masonry/ precast concrete block walling masonary/ stone masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work, complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced, well bonded, bedded and solidly hearted built in CM 1:4, complete all as specified and as directed.

All as per item No. 2 here-in-before, but except stone complete all as specified and directed.

M&L for precast PCC 1:3:6 type C1 (20mm graded agg) as in bond stones set in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level), complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded agg ) as in sub floor complete all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection, laid to a slope of 1 in 12 in a manner that top face shall conform to the finished level of PCC adjacent to the edging. PCC shall be laid in alternate bays (not exc. 2.5 meters length) and finished even and smooth without using extra cement. 6 mm wide joints shall be provided throughout the thickness of plinth protection in concrete bays at corners and turning points and also in between walling and plinth protection. All joints in bays, as well as between walling and the concrete in plinth protection shall be filled in with mastic filling comprising 1 part of heated bitumen 85/25 grade and 3 parts of sand (all by weight) complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each, complete all as specified and directed.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for fixing lugs, holdfasts, etc of pressed steel chowkhats complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) supplied and fitted to chowkhat complete all as specified and directed.

Supply only galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as spd and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 150mm aluminium handles, cast type ,anodised and pattern / design as approved, complete all as specified and directed.

S&F 125mm aluminium handles, cast type ,anodised and pattern / design as approved, complete all as specified and directed.

S & F butt hinges, 100mm medium weight, cold rolled mild steel, complete all as specified and directed.

Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins, complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm each pane, complete all as specified and directed.

Dismantling of plain or corrugated steel / fibre glass reinforced sheeting, any guage, thickness from roof covering complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with screw complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F 2000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in replacement as specified and directed.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing complete all as specified and directed.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor complete all as specified and directed.

Fixing only 15 mm bore steel tube obtained from srl item no 37, here-in-before, to walls and ceilings or laying in floors complete all as specified and directed.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing complete all as specified and directed.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor complete all as specified and directed.

Fixing only 20 mm bore steel tube obtained from srl item no 40, here-in-before, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube complete all as specified and directed.

S&F in repairs 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles complete all as specified and directed.

Supply only PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china squatting pan 'Orissa pattern' size 580X 440 mm white with integral foot rest (including fixing of flushing cistern and flush pipe) including connection to trap,concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 550 X 400 mm including brackets, waste pipe, 32 mm chromium plated waste fitting with long screwed shanks, fly-nuts and 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, exclusive of fixing of supply and screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube complete all as specified and directed.

S&F in repairs CP tubular towel rail, 20 mm dia. 60 cm long between flanges complete all as specified and directed.

S&F in repairs Soap dish, cast copper alloy, chromium plated with screws complete all as specified and directed.

S&F in replacement 110 mm bore, PVC (SWR) pipes single socketed/ elbow/ tee, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified and directed.

S&F in replacement 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for one coat of synthetic enamal paint to steel surfaces of any discription not otherwise described over 10cm width or girth including preparation of old surfaces, complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces or stone masonry in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats cement base paint on plastered surface including preparation of newly plastered surfaces, complete all as specified and directed.

Dismantling wall and ceiling boards of any description or any thickness including cover fillets / frame complete all as specified and directed.

S&F powder coated GI snap grid of size 605 X 605mm frame work for false ceiling including hangers 2mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long whereever required or tie on structural steel complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick decorative laminated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and grease spots and applying one coat of white lime wash complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) complete all as specified & directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying one coat of cement base paint (1st quality) with and including curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including complete removal of existing treatment with sand paper or iron patti / flat complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx 20cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L for 75 mm thick P.C.C 1:4:8 type B-2 using 40mm graded stone agg as in sub base of floor complete all as specified and as directed.

S&F in repair 40mm thick puff insulation panels sandwiched between 0.40mm pre painted galvalume sheet of white from inside & outside complete all as specified and as directed. (Note:- PUF should be density of 40 kg/cum)

S& F for 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S& F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S& F 75mm /110mm PVC (SWR) reducer complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.

S & F Steel work in tubular trusses, vertical posts , purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement (with water proofing compound) complete all as specified and directed.

M&L three coats of white wash on plastered surface including preparation of newly plastered surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested, complete all as specified and directed.

Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (less then 150mm internal dia) of any description set in cement mortar, complete all as specified and directed.

M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed complete all as specified and directed.

Demolition of RCC work of any description and in any position complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like except set in cement mortor 1:4 complete incl necessary form work complete all as specified and directed.

M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of septic tank / soakage well (constructed by engineers unit) including desilting/desludging the septic tanks/ soakage wells etc by mechanical means and removing the sludge in liquid or semi-liquid state out side defence land complete all as specified and directed.

Construction of 50 users Septic tank to carry sewage and sullage water, with RCC (1:1.5:3), B-1 Roof Slab all as per shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 with following specification. Excavation in any type of soil, precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls , Base Slab , Baffle walls of RCC (1:1.5:3), Vent shaft , manhole openings with cover connection Complete. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.

Construction of Soak well 1.80m dia and 3.0m effective depth as specified on STD 1173(C) sheet 1R/2 with following specification free board as per site requirement in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of 1:1.5:3 concrete including intercepting chamber and screen chamber made of precast cement concrete (20mm graded stone aggregate) block masonary in CM, RCC cover slab in 1:1.5:3/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with Stone boulders of size, complete all as specified on STD 1173(C) sheet 1R/2. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.,complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded, 1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 88 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 88 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

S & F LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp of approved make complete all as specified and directed.

M & L for Switch piano, flush type single pole, one way 5 Amp, 230 volts, complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 3 pin, 5A, 230 volts, complete all as specified and directed.

M & L for Switch piano, flush type single pole, one way 16 Amp, 230 volts, complete all as specified and directed.

M & L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, 230 volts, complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

Supply and fix Sheet metal enclosure for DBs 8 way, double door, 240 Volt, with 200 Amps rates bus bar, complete all as specified and directed.

Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

Schedule of Credit

H S ENTERPRISE (BID ID -3101772)

M/S SHIV NATH ENTERPRISES (BID ID -3116430)

m/s jupiter builders (BID ID -3101832)