REPAIR / MAINTENANCE OF EXISTING PIPE LINE (DI/CI/GI/PVC) AT MARRIED ACCOMMODATION OF SOUTH CAMPUS UNDER GE (U) BATHINDA.

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line etc. not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

Taking out from trench existing old rusted / corroded CI/DI pipe of size 200 mm bore spigot and socketed ends ( including all fittings) and lead joints incuding burning out joints and recovering lead including bailing out dirty / muddy water if necessary complete all as directed by Engineer-in-charge.

All as per serial item No. 04 above but for 150 mm bore old rusted / corroded CI/DI pipe.

All as per serial item No. 04 above but for 100 mm bore old rusted / corroded CI/DI pipe.

Laying, jointing, commissioning & testing in trenches old servicable CI/DI pipe of 200 mm bore with new fittings complete all as directed.

All as per serial item No. 08 above but for 150 mm bore CI/DI pipe.

All as per serial item No. 08 above but for 100 mm bore CI/DI pipe.

Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket Tyton push on Joints of spigot and socket ends centrifugally cast(spun) class " K-7" conforming to IS-8329 -2000 in any length of size 200 mm bore laid in trenches complete all as specified and directed.

All as per serial item No. 12 above but for 150 mm bore DI pipe.

All as per serial item No. 12 above but for 100 mm bore DI pipe.

Supply and fixing CI / DI fittings and specials up to 150 mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer complete all as specified and as directed.

All as per serial item No. 16 above but for CI/DI fittings and specials 200 mm dia to 300 mm dia pipes. Note for serial item No. 16 & 17:- The weight of the fittings for the purpose of payment shall be actual weight of the fittings or as specified in IS code whichever is less. if the actual weight is to be considered for payment purpose , the Board of officer shall be ordered by the GE to ascertain the weight of fittings and counter signed by GE and the copy of the same shall be enclosed with final Bill.

Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe 100 mm bore and connections including all fittings complete all as specified and as directed.

All as per serial item No. 18 above but for GI pipe of 80 mm bore.

All as per serial item No. 18 above but for GI pipe of 50 mm bore.

All as per serial item No. 18 above but for GI pipe of 25 mm bore.

All as per serial item No. 18 above but for GI pipe of 20 mm bore.

Supplying, Laying, jointing and testing of Steel water tubing 100 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and directed.

All as per serial item No. 24 above but for GI pipe of 80 mm bore.

All as per serial item No. 24 above but for GI pipe of 50 mm bore.

All as per serial item No. 24 above but for GI pipe of 25 mm bore.

All as per serial item No. 24 above but for GI pipe of 20 mm bore.

Laying, jointing, commissioning & testing only in trenches old servicable GI pipe 100 mm bore after cleaning , removing rusted particle & mud particles of inside surfaces and outside surfaces of wall of pipe etc including supply and fixing new tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint complete all as specified and directed.

All as per serial item No. 30 above but for GI pipe of 80 mm bore.

All as per serial item No. 30 above but for GI pipe of 50 mm bore.

All as per serial item No. 30 above but for GI pipe of 25 mm bore.

All as per serial item No. 30 above but for GI pipe of 20 mm bore.

Taking down from walls / ceilings/ laid in floors existing old unservicable rusted / corroded GI pipe 25 mm bore and connections including all fittings complete all as specified and directed.

All as per serial item No. 36 above but for GI pipe of 20 mm bore.

All as per serial item No. 36 above but for GI pipe of 15 mm bore. Note for serial item No. 36 to 38: The quoted rate against these items are deemed to be included for sorting out and stacking serviceable GI pipes for relaying / reuse under respective item from the unserviceable pipes.

Supplying, Laying, jointing and testing of Steel water tubing 25 mm bore medium grade, galvanised, ISI Marked including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint fixed to walls, ceiling or under floors etc complete all as specified and directed.

All as per serial item No. 39 above but for GI pipe of 20 mm bore.

All as per serial item No. 39 above but for GI pipe of 15 mm bore. Note for serial item No. 39 to 41 The cost of new GI fittings are included in these items and nothing extra shall be paid on this account.

Laying or Fixing, jointing and testing of old servicable GI pipe 25 mm bore after cleaning , removing rusted particle & mud particles of inside surfaces and outside surfaces of wall of pipe etc including Supply and fixing new tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint fixed to walls, ceiling or under floors etc complete all as specified and directed.

All as per serial item No. 42 above but for GI pipe of 20 mm bore.

All as per serial item No. 42 above but for GI pipe of 15 mm bore. Note for serial item No. 42 to 44: (i).The cost of cleaning , removing rusted particle & mud particles of inside surfaces and outside surfaces of wall of pipe inclueded in this item and nothing extra shall be paid on this account. (ii) The cost of new tube fittings are included in this item and nothing extra shall be paid on this account. (iii). Old pipe fitting shall not be used in this item.

Supply and fixing in repair Gun metal globe or gate valve for 50 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 25 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 20 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 15 mm bore iron pipe , with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair 80 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 100 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 150 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 200 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing in repair 250 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.

Supply and fixing stain less steel spindle of sluice valve 250 mm dia including nuts, bolts, washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed.

Supply and fixing stain less steel spindle of sluice valve 200 mm dia including nuts, bolts, washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed.

Supply and fixing stain less steel spindle of sluice valve 150 mm dia including nuts, bolts, washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed.

Supply and fixing stain less steel spindle of sluice valve 100 mm dia including nuts, bolts, washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed.

Supply and fixing stain less steel spindle of sluice valve 80 mm dia including nuts, bolts, washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed.

Material and Labour for Construction of valve pit Type 'B' of size 120 cm x 120 cm x 120 cm ( internal dimension ) of brick masonry built in cement mortar (1:4). from the top of surface including cover of MS sheet 3.15 mm thick and MS frame made of angle iron of size 50 mm x 50 mm x 6 mm with hinges, handle and locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer and grouting in PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregates , Rendering 15 mm thick in cement mortar (1:3), including three coats of white wash on internal surfaces and external exposed surfaces , foundation concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregates including necessary earthwork , returning filling , removal including demolition the existing valv pit complete all as specified and shown on drawings. Note : Applicable drawing for valve pit is Drawing No. BTD-811 sheet 1/2 to 2/2

M&L for run lead joint for 500 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 350 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 300 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 250 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 200 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 150 mm bore CI pipe including spun yarn complete all as specified and as directed.

M&L for run lead joint for 100 mm bore CI pipe including spun yarn complete all as specified and directed.

M&L for run lead joint for 80 mm bore CI pipe including spun yarn complete all as specified and directed.

Material and labour for detecting and repairing the water leakage in already laid CI / DI pipe line 500 mm bore including necessary excavation and earth work , bailing out stagnated /muddy water complete all as directed.

All as per serial item No. 68 above but for 300/350 mm bore CI/DI pipe line.

All as per serial item No. 68 above but for 250 mm bore CI/DI pipe line.

All as per serial item No. 68 above but for 200 mm bore CI/DI pipe line.

All as per serial item No. 68 above but for 150 mm bore CI/DI pipe line.

All as per serial item No. 68 above but for 100 mm bore CI/DI pipe line.

Material and labour for repair the leakage of GI pipe line of 100 mm dia by replacing the necessary new fittings such as elbows ,nipples union,reducers etc, GI pipe medium grade upto 1.00 mtr long as per site requirement if required, including earth work such as excavation , returning and removal and bailing out of stagnated / muddy water till restore the water supply complete all as directed.

All as per serial item No. 75 above but for 80 mm bore GI pipe line.

All as per serial item No. 75 above but for 40 mm/50 mm bore GI pipe line.

All as per serial item No. 75 above but for 25 / 32 mm bore GI pipe line.

All as per serial item No. 75 above but for 15/20 mm bore GI pipe line. Note for serial item No. 75 to 79 (i) The cost of excavation & earth work and new fittings such as elbows ,nipples union,reducers etc, and GI pipe medium grade upto 1.00 mtr long of required size are included in this item and nothing extra shall be paid on this account. (ii). Old pipe fittings shall not be used in this item.

Material and labour for detecting and repairing water leakage from the exising PVC pipe line of 110 mm bore including supply and fixing new PVC fittings of require size along with necessary new CI/ DI Joint, including necessay excavation earth work and bailing out stagnated / muddy water etc complete all as directed.

All as per serial item No. 80 above but for PVC pipe line 90/75 mm bore.

All as per serial item No. 80 above but for PVC pipe line 50/63 mm bore.

All as per serial item No. 80 above but for PVC pipe line 20/25 mm bore. Note for serial item No. 80 to 83: (i) Contractor shall depute Labour / Pipe Fitter and other require equipments such as JCB / Tractor and Fuel etc. to attend the leakage / complaint on daily basis as per complaints are traced out . (ii) Complete site for attending the leakage shall not be handed over to contractor at a time. Site of leakage only be handed over to the contractor on site requirement basis. (iii) Contractor / Supervisor shall collect complaint of leakage from concerned JE as daily basis and shall complete the complaint on the same day. (iv) If leakage again found during the currency period of contract at the repaired location, contractor shall repair again without any extra cost in terms of condition 46 of IAFW-2249 of General condtion of contracts. (v) Contractor shall provide equipments like JCB / tractor etc. and fuel at his own cost and arrangement for rectifying the complaint as per site requirement and nothing extra shall be paid on this account. (vi) The cost of Excavation & earth work is included in this item nothing extra shall be paid on this account. (vii)The cost of new PVC fittings along with necessary new CI/ DI Joint of required size are included in this item and nothing extra shall be paid on this account.(viii) Old pipe fittings shall not used in this item.

JASPAL SINGH CONTRACTOR

M/s Kataria Construction Company

MODERN ENTERPRISES