Construction of 01 no Art and Craft room at Govt HS Mangith Zone Khari Distt Ramban

Amount

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil. (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (nallah stone aggregates).(including all carriages lead and lift if any)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulder (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. (including all carriages lead and lift if any)

Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. (including all carriages lead and lift if any)

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar. In foundation and plinth. (including all carriages lead and lift if any)

Extra for brick work in superstructure above plinth level (by manual mean). (including all carriages lead and lift if any)

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete. (including all carriages lead and lift if any)

Centering and shuttermg including strutting, propping etc.and removal of form for·Lintels, beams, plinth beams, girders, bressumers and centilevers. (including all carriages lead and lift if any)

Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames. (including all carriages lead and lift if any)

Cement plaster in 1:6 ( 1 cement:6 fine sand ) , 15 mm thick.(including all carriages lead and lift if any)

Providing and fixing paneled or paneled or glazed shutters for doors and windows and clestory windows including ISI marked black enameled M.S butt hinges with necessary screws, including paneling which will be paid separately.(35 mm thick of 2nd class kail wood). (including all carriages lead and lift if any)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled andglazed shutters towards the cost 4mm thick glass panes.Extra on item no-11) towards the cost 4mm thick glass panes. (including all carriages lead and lift if any)

Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.50mm thick. (including all carriages lead and lift if any)

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring. (including all carriages lead and lift if any)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.including priming coats (including all carriages lead and lift if any)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete(Qnty vide item No 10) (including all carriages lead and lift if any)

Distempring with oil bound washable distemper of approved brand & manufacture to give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint ofrequired shade New work (two or more coats) [email protected] kg/1 Osqm (including all carriages lead and lift if any)

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth. (including all carriages lead and lift if any)

Structural steel work in built up section,trusses and framed work,including cutting,hoisting fixing in position and applying a priming coat of approved steel primer including soffits and eaves boarding all complete. (including all carriages lead and lift if any)

Providing and fixing flat pressed 31ayer medium density.particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately 6mm (including all carriages lead and lift if any)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washersor with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2 (including all carriages lead and lift if any)

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2 75 rft or 22.86 rm (including all carriages lead and lift if any)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo/FIR Wood (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge. (including all carriages lead and lift if any)

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868) transparent or dyed to required colouur or shade with necessary screws etc. complete (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm (including all carriages lead and lift if any)

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complet.e (including all carriages lead and lift if any)

SAIF UD DIN MALIK

Mohd Azam