Construction of New GED Section Office at Ganjam (R and B) Division office at Berhampur for the Year 2025-26 (Ltr no.41818 dt.01.11.2025) (Building work)

Earth work in excavation of foundation in hard soil or gravelly soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Filling in foundation and plinth with available excavated earth including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Carriage of excavated earth and unwanted debrices by mechanical means and disposing the same away from the work site within 5 Km lead as directed by Engineer-in-charge including loading and unloading etc. complete in all respect.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base Footing

Plinth beam

Column super structure

Lintel

Chajja

Stair case

Roof Beam

Roof Slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge

Supplying, fitting, fixing up window (sliding type) made up aluminium Section 9778 as windows frame, section No. 4095,4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials , all texes labour, T&P excluding cost of glass etc. complete as per direction of Engineer- in-charge

6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge.

Providing 12mm thick cement plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge

Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Fixing of Kota tiles in floors, Trades or steps & Landing on 25mm thick bed of cement morter(1:1) with pigments to match the shade of the tiles, including polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.[A/R-2006,Page-89, Item no.16]

Fixing of Chequred tiles in floors, Trades of steps & Landing with with cement morter(1:1) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.

Supplying, fitting, fixing of Polished Vitrified floor tiles in Floor of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm coloured laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) in Dado on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Finishing surface of walls with Acrylic putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging for all floors wherever necessary with cost, conveyance, of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Finishing to exterior wall surface with 2 (two) coats of weather seal coat approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge.

Distempering two coats to wall surface with Distemper of app. Shade including cost of all materials and labour with T&P etc complete in all respect..[A/R-2006,Page-98, Item no.22]

Enamel painting two coats including cost of all materials and labour with T&P etc complete in all respect as per direction of Engineer-in-Charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.

Providing Antitermite treatments as per ISI specification including makig hols 3'0" C/C both ways injecting cemical with water in properation (1:20) or any approved propertion by the Engineer-in-Charge and treatment to choukath sides and wall juction cost and conveyance of all materials, labours, R&P etc completion as per direction of Engineer-in-Charge.

External Plinth Protection Earth work in excavation of foundation in hard soil or gravelly soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Cement concrete of proportion M-20 with 20 mm size down granite crusher broken chips of approved quality including cost, conveyance, royalty of all materials and labour with T&P etc. Complete.

Fixing of Chequred tiles in floors, Trades of steps & Landing with with cement morter(1:1) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.

Carriage of excavated earth and unwanted debrices by mechanical means and disposing the same away from the work site within 5 Km lead as directed by Engineer-in-charge including loading and unloading etc. complete in all respect.

FIRST FLOOR R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base Footing

Lintel

Chajja

Shelves

Roof Beam

Roof Slab

Stair case

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge

INR Three Lakh Six Thousand Four Hundred Twenty and Paise Thirty One Only

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge

INR One Lakh Fifty Four Thousands One Hundred Fifty Six and Paise Sixty Six Only

INR Thirty One Thousands Seven Hundred Ninety and Paise Thirty Eight Only

Supplying, fitting, fixing up window (sliding type) made up aluminium Section 9778 as windows frame, section No. 4095,4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials , all texes labour, T&P excluding cost of glass etc. complete as per direction of Engineer- in-charge

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge

6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge.

Providing 12mm thick cement plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge

INR Twenty Two Thousands Seven Hundred Forty Seven and Paise Fifty One Only

Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting, fixing of Polished Vitrified floor tiles in Floor of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm coloured laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) in Dado on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

INR Twenty One Thousands Eight Hundred Eighty Seven and Paise Forty Six Only

INR Nine Thousand Six Hundred Thirty Eight and Paise Sixty One Only

Fixing of Kota tiles in floors, Trades or steps & Landing on 25mm thick bed of cement morter(1:1) with pigments to match the shade of the tiles, including polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.[A/R-2006,Page-89, Item no.16]

Finishing surface of walls with Acrylic putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging for all floors wherever necessary with cost, conveyance, of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

INR Forty Five Thousands Thirty Six and Paise Forty Six Only

Distempering two coats to wall surface with Distemper of app. Shade including cost of all materials and labour with T&P etc complete in all respect..[A/R-2006,Page-98, Item no.22]

Enamel painting two coats including cost of all materials and labour with T&P etc complete in all respect as per direction of Engineer-in-Charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.

INR Three Lakh Two Thousand Nine Hundred Forty One and Paise Fifty Only

Lintel

Chajja

Roof Beam

Roof Slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge

6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge.

Providing 12mm thick cement plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge

Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

INR Forty Five Thousands Thirty Six and Paise Forty Six Only

Distempering two coats to wall surface with Distemper of app. Shade including cost of all materials and labour with T&P etc complete in all respect..[A/R-2006,Page-98, Item no.22]

INR Four Thousand Five Hundred Seventy Six and Paise Seventy Three Only

INR Thirty Two Thousands Six Hundred One and Paise Ten Three Only

INR Thirteen Thousands Seven Hundred Twenty Eight Only

INR Fifteen Thousands Six Hundred Sixty Only

INR Eleven Thousands Two Hundred Forty One Only

INR One Thousand Eighty Only

INR Six Hundred Fifty Eight Only

INR One Thousand Three Hundred Ninety Two Only

INR Eleven Thousands Five Hundred Fifteen Only

INR Two Thousand One Hundred Thirty Only

controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make-Safex/Fireshield/Ceasefire

G.P.H Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC Pipes In First floor

25mm dia C-PVC Pipes

25mm dia UPVC ASTM-D Pipes

32mm dia UPVC ASTM-D Pipes

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In First floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In First floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock(CON-CHR-041KN)

15mm dia CP angle stop cock(CON-CHR-053KN)

15 mm dia CP L.B. Bib cock(CON-CHR-107KN)

15 mm dia CP Sink Cock(CON-CHR-357KN)

15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)

15mm dia CP flange

15mm Cp extention piece

25mm dia C-PVC ball valve.(Ashrivad make)

32mm dia C-PVC ball valve.(Ashrivad make)

125mmdia C.P.grating

INR Two Hundred Eighty Three and Paise Twenty Only

CP towel rail (25 mm)(ACN-CHR-1111N)

C.P towel ring(ACN-CHR-1121NMI)

Soap dispensing with glass bottle(ACN-CHR-1137N)

Corner Glass Shelf with Bracket)(ACN-CHR-1173 )

CP Soap dish Holder (ACN-CHR-1131N)

CP coat hook(ACN-ACR-1161)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000litre capacity water storage tanks (Ist Floor)

Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by nonheat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 110mm dia UPVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door Tee

110mm U-PVC door bend

110mm dia U-PVC 'P' trap

110mm U-PVC plain bend

110mm dia U-PVC Socket

110mm dia U-PVC cowl

110mm dia U-PVC clamp

50mm dia UPVC class-IV pipes

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. a.Cascade dual flushset (Hindware)No.92099

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia C

INR Fifteen Thousands Four Hundred Thirty Four and Paise Twenty Only

INR One Thousand Five Hundred Thirty Three and Paise Twenty Only

INR Five Thousand Seventy Five and Paise Ninety Only

INR Five Thousand One Hundred Twenty Five and Paise Forty Two Only

INR Nine Thousand One Hundred Thirty Eight and Paise Fifty Eight Only

INR Eleven Thousands Four Hundred Twenty One and Paise Ten Six Only

INR Fifty Three Thousands Three Hundred Fifteen and Paise Eight Only

INR Six Hundred Twenty Six and Paise Ninety Three Only

INR Three Thousand Eight Hundred Forty One and Paise Seventy Four Only

INR Two Thousand Nine Hundred Eleven and Paise Seventy Eight Only

INR Forty Eight Thousands One Hundred Fifty and Paise Ten Five Only

INR Six Thousand Nine Hundred Thirty and Paise Eighty Only

INR Forty Two Thousands Three Hundred Fifty Eight and Paise Eighty Only

INR Twenty Thousands Six Hundred Two and Paise Seventy Only

Sinking of 200mm x 150mm size Tube well through D.T.H or Combination drilling rigs in hard rock areas with GI/PVC casing pipes Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Labour for drilling of 200 mm dia bore 00 mtr to 125 mtrs

150mm dia

er the direction of Engineer-in-Charge.

Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition.

Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1.00H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make

DOL Control panel

32mm dia steel short piece

Well cap

50mm size CI bracket

2.50 sqmm flat cable

Steel rope with cover

20mm dia rigid UPVC pipes

Labour charges for lowering including transportation

32mm dia HDPE pipe

Supplying all materials, labour, T&P and cutting metalled road for taking the GI pipe/sewer line through and making good to the damages including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge