Special repair renovation of residential Qtrs T I Qtrs Block II,III and IV 12 Sets, T II, Block I 4 Sets and T III Qtrs Block V 2 Sets at Parwanoo

Amount

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc. complete and stacking them within 20 metres lead. 20480100 Not exceeding 3 sq.m in area

Demolition above G.L. up to floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. /R.B. works:- 20060100 R.C.C. work.

Dismantling tiled floors laid in mortar up to floor two level including stacking of serviceable aterials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) 20210200 For thickness of tiles above 25mm and upto 40mm

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. 20110300 + Extra over item No. 20110000 for every additional storey height above floor two level In cement mortar

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:- 18210400 Cement Mortar 1:4 (1 Cement : 4 Sand)

10010701 Brick work using common burnt clay building bricks in foundation and plinth in :-10010702 Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks

10040301 Half brick masonry in common burnt clay building bricks in :- Cement Mortar 1:4 (1 cement : 4 sand) First Class Bricks

Coloured Glazed Tiles (Size-300mmx450mm) 10 mm thick in skirting, risers of steps and 12 mm thick cement mortar 1 : 3 (1 Cement : 3 Sand) jointed with cement slurry. (Make: Nitco/ Somany/ Orient Bell/ Kajaria or equivalent)

13600000 Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300x300mm size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement (Make: Nitco/ Somany/ Orient Bell/ Kajaria or equivalent)

1200100000 Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. 1200105000 1st class Kail wood.

1200500000 Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 1200503000 40mm thick 1200503050 1st class Kail wood.

1201900000 Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.1201901000 40 mm thick 1201901050 1st class Kail wood

1207500000 Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm to windows and clerestory windows including 60x20 mm beading of 1207503000 1st class deodar wood.

1210600000 Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete 100 mm

1210400000 Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.1210402000 250x16mm

1210500000 Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 1210504000 150x10mm

Providing and fixing Bright finished M.S. hydraulic door closer (024954000000 Supply rate only)

1218000000 Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete)

1217900000 Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete)

1218200000 Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete

1218300000 Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete. 1218302000 1st class deodar wood

1213100000 Providing and fixing 65x35mm special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality).

Providing and fixing Magnet catcher for cupboards

09130000 Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: 09130100 Foundation, plinth and floors

13680000 Providing and fixing 10mm thick anti skid water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. (Make: Nitco/ Somany/ Orient Bell/ Kajaria or equivalent)

13700000 Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. (Make: Nitco/ Somany/ Orient Bell/ Kajaria or equivalent)

19060000 Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design

18260000 Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:18260104 Plain Glass: 4mm thick.

13570000 Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm thick

Chamfering/moulding of granite Stone

1504000000 Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. 1504040000 In gratings framed guard bars ,ladders,railling,brackets and similar works

14550000 Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

458000000 Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

1461000000 Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/ facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

16002000 Applying priming coat over new steel & other metal surfaces after& including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. 16002010 With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome (Make: Asian Paints/ Berger/ Narolac or equivalent)

16005000 Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paint brushin to give an even shade including leaning the surface of all dirt, dust and other foregin matters :--16005020 Enamel paint other than white (Make: Asian Paints/ Berger/ Narolac or equivalent)

16036000. Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. 16036020 Readymixed paint brushing wood primer pink. (Make: Asian Paints/ Berger/ Narolac or equivalent)

16043000.Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an evenshade including cleaning of all dirt,dust and other foreign matter sand papering & stopping. 16043010 With white paint. (Make: Asian Paints/ Berger/ Narolac or equivalent)

16041000 Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including leaning of all dirt,dust and other foreign matter sand papering and stopping 16040010 With white enamel paint (Make: Asian Paints/ Berger/ Narolac or equivalent)

17160000 Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

16103000000 Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

17181000 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. (Make: Asian Paints/ Berger/ Narolac or equivalent)

16104000000 Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. (Make: Asian Paints/ Berger/ Narolac or equivalent)

0805000000 Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:0805020000 Flat surfaces such as soffits of suspended floors, roofs, landings and the like. 0805020100 Floors etc.upto 200mm. in thickness.

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in: 09110200 Walls including attached but tresses,pilasters, and their caps and bases and string courses etc. upto floor two level:

19020000 Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)

22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth en the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. For the purpose of measurement the entire treated surface will be measured."

Taking out/dismantling W/C pan (European type ) and wash basin i/c accessories , stacking the serviceable material and disposal unserviceable material as per the direction complete in all respect.

3.2 (a) Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- 15mm nominal bore

3.132 Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. i) 610 x 510 mm with bowl depth 200 mm With Tray.

3.25 Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately): - (i) Ordinay type (Make: CERA/ Hindware/ or equivalent)

3.133 Providing and fixing PTMT colured/ white high density polyethylene/ poly propylene 10 litres capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push butten, couplings for connections with inlet, outlet and over flow pipe , 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) (Make: CERA/ Hindware/ or equivalent)

3.34 Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : HOLLOW TYPE: a Black or white plastic seat and cover (Make: CERA/ Hindware/ or equivalent)

3.39 Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- Flat back 550mm x 400mm Cera make with Pedestal (Make: CERA/ Hindware/ or equivalent)

3.40.P/F Vitreaus China pedestal for wash basin complete recessed at the back for the reception of pipes & fittings (Make: CERA/ Hindware/ or equivalent)

3.46 Providing and fixing C.P. Brass waste for wash basin or sink :- (ii) 40mm dia.

P/F PVC. Waste pipe 40mm dia for Wash basin or Sink 750 mm long

3.94 Providing and fixing P.V.C connection with brass unions :- (a) 300/450mm length :- (i) 15mm nominal bore

3.52 Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers.

3.53 Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :- (ii) 600mm x 20mmm

3.174 Providing and fixing PTMT smart shelf of approved quality and colour with steelscrews and rawal plugs etc complete

3.57 Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws

3.68(ii) P/F C.P Brass pillar tap with Capstan head (e) 15mm dia , Swan neck (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.68(i) P/F C.P Brass pillar tap with Capstan head (a) 15mm dia. Long body (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.70 Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe. (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.104 P/F brass full way valve wheel 15 mm

P/F C.P Jet i/c connection pipe and fittings complete in all respect (angle valve to be paid seperately) (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.115 PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete . 110 mm X 90 mm.

3.115 PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete . 110 mm X 75 mm.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap

3.116 Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm dia

3.116 Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75 mm dia

3.125 Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. 110mm dia

3.125 Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. 75mm dia

3.118 Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm dia

3.118 Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 75mm dia

3.119 Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. 110 mm dia.

3.119 Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. 75mm dia

3.120 Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. 110mm

3.120 Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. 75mm dia

3.121 Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110mm

3.121 Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 75mm dia

3.67 Providing and fixing brass bib tap (Superior or heavy type) :-i) 15mm dia long body (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.77 Providing and fixing wall mixing faucet for shower and bath hand shower with Angular and Rest Holder (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.80 Providing and fixing hand shower with Angular and Rest Holder (Jaguar/ ESS ESS / Seiko/ Bathsense or equivalent Make as per direction of EIC)

3.114 Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- ii) 1000 litres net capacity tank (Sintex/ Oswal or equivalent Make as per direction of EIC)

4.25 Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: (I) Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mm x 610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand)

OM PRAKASH

BHARAT SINGH CHAUHAN

BALRAJ SINGH GOVT CONTRACTOR