Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.5 LAccepted-AOC 575 10 PNB STREET DELHI BYE PASS ROAD RAMGOPAL COLONY ROHTAK HARYANA | 1 | Accepted-AOC L1 | |
| 2 | 2₹27.4 L+₹1.2 L (4.39%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical 01 VILLAGE BABOORI BARARI MATHURA UTTAR PRADESH 281005 | MATHURA | UTTAR PRADESH | 281005 | - | Rejected-Technical Documents not found in order |
Tender Value
₹24.0 L
EMD Value
₹48,020
Closing Date
3 Aug 2021, 4:00 pmClosed
Executive Engineer
EE-II M.C Manesar
Estimate for Interior and Civil Works of CFC Center for MCM at ground floor Manesar.
2021_HRY_178294_7
MCM/EE-II/2021/43
Open Tender
Civil Works
Works
30 days
Ground floor at M.C Manesar.
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹48,020
28 Sept 2021
27 Jul 2021
4 Aug 2021
27 Jul 2021
3 Aug 2021
27 Jul 2021
Amount
-Supply and installation IO modules of D-Link company for LAN points. (NS)
-Supply and installation WD/Seagate surveillance recording drives 4TB each. (NS)+18%Gst
-Providing and fixing exhaust fan of orient or equivalent company.(NS)
-Supply of 5 KVA copper winding stabilizer range 130 Volt to 240 Volt of Skybird or equivalent company.
-Supply of network router with wifi of Tenda company.
-Supply of ACC Block Plinth Wall with Granite
-Supply of Acrylin Surface of Dupont Company
-ACP work with MS frame finish with 4mm ACP sheet ( for billing total surface area of ACP will be measured)
-Supply and installation 12U rack for computer networking. (NS)
-Supply and installation of POE switch of 16port of hikvision/ secure
-Providing and fixing H type stainless steel 30mm dia Glass door handle. (NS)
-Providing and fixing drain pipe for split AC Units with double insulation.
-Providing and fixing partially glazed/ non glazed partition 75 mm thick of (600mm X 600mm) using kail/miranti wood frame work of size 50mmX38mm treated fire retardant & anti termite paint spacing not exceeding 0.6m C/C horizontally as well as vertically (joint less vertical member) or( 50mm X 25mm aluminium tube ). Bottom of the frame work to seemed to the floor & slab with concealed hardware & screws & adhesive, wherever necessary, frame to be sandwiched in between 12mm thick commercial ply conforming IS standard 303 (i.e veneers treated with preservatives, glue line fortified with non leachable organophosphorus compound and FTP technology) of commercial plywood or ( 12mm thick HDHMR Board of Action Tesa Company ) & finished with 1.0 mm thick laminate on both sides of Merino or Greenlam, including all zinc plated joineries and fixtures i.e. nails etc.. All exposed faces to be finished with Steam beech wood beading & all wooden surfaces to be finished. with lacquer polish, of approved shade, float glass 6 mm thick not larger than 1.2m in width shall be fixed with Steam beech wood beading 12.5mmx12.5mm. Rate includes design & grooves in laminates, provision for extra frame work as & where necessary for skirting and making cutout for switch plate, switch boxes, light fittings etc. making provision for laying conduits. full height partition will be measured from finish Floor level to the bottom of false ceiling. [Note:- for UPS/ Battery room only, instead of 12mm ply, 12mm cement composite board of bison make shall be used, and instead of laminate, shall be painted with rustic paint as discussed in paint column. (NS)
Supply Of blackout roller blinds of vista compnay with appoved shade fabric and operations mechanism system to be fixed in wall/ceiling, complete fitted at site in all respects i.e transportation, fixing with all zinc and nickel coated accessories and curing with PV sheets to avoid dust to settle during the works at site.
-Brick/ACC Block wall laid in cement
-Supply of pinup board with fabric finish
-Providing and fixing LED 600X600 of havells company 36Watt. (NS)
-Providing and fixing 6 Amps light and exhaust points with Plaza/ Kalinga gold copper wire of 1.5 SqmmX2wire for phase and neutral, all wiring will be done point to point with modular sheet and switch of Coral brand of Havells company. (One switch will counted as one point for billing).
-Providing and fixing 6 Amps fan points with Nos. regulators with Plaza/ Kalinga goldcopper wire of 1.5 SqmmX2wire for phase and neutral, all wiring will be done point to point with modular sheet, switch and regulator of Coral brand of Havells company. (One regulator will counted as one point for billing).
-Supply and installation telephone IO modules of D-Link company for LAN points. (NS)
-Laying, crimping and terminating of telephone cable from server room to individual points. (One cable will be counted as one point for billing) (NS)+GST
-Providing and fixing of Commissioner Municipal Nos. Corporation Manesar signage text made out of acrylic.
-Providing and fixing split ac points with plaza/ kalinga gold copper wire of 4sqmm x 2 wire for phase and neutral and 1.5mm for earthing, all wiring will be done point to point with 2 modular sheet and power socket of coral brand of havells company.
-Providing and fixing LED downlight 15 watt of havells company . (NS)
-Split AC installation charges including fixing of indoor and outdoor units.
-Providing and fixing full height partition with 12mm thick toughened glass,(Saint Gobain, Modi Guard, Asahi) complete delivered at site. Include cost of glass in this item and S.S. Connectors [any number]- glass to glass, glass to floor/ ceiling cost to include in this mentioned item. Glass to be toughened, polished and grinder properly. The item to be inclusive of providing, fixing and necessary wastage. Glass shall be measured as per actual size. Brand of float glass u sed- Saint Gobain/ Modi Guard/ Asahi (NS)
-Supply of wooden panelling for corian top
-Providing and fixing single shutter patch fitting, without frame, with double action hydraulic heavy duty floor springs & Pivot on top including cutting, embedding the floor springs, along with S.S. cover plate etc. The item includes with complete patch fittings, door lock etc, make Fittings- Dorma/ Hettich/ Ozone company with 7yrs onsite warranty. (NS)11818+GST
-Providing and fixing 16 Amps power sockets UPS & RAW with Plaza/ Kalinga gold copper wire of 2.5 Sqmm X 2 wire for phase and neutral and 0.7 Sqmm for earthing, all wiring will be done point to point with 6 module modular sheet, 2no. 16Amp sockets, 2no. 16Amp. switch of Coral brand of Havells company. (One set of 6module sheet will counted as one point for billing).
-MCB Box with MCB MAINS DB. All switch gear of Havells/ equivalent company 18430+GST
-Supply and installation D-Link Switch 24 port gigabit for computer networking. (NS)
-Laying, crimping and terminating Cat 6 cable of D-Link from server room to individual points. (One cable will be counted as one point for billing) (NS)
-Supply and installation D-Link Patch panel 24 port for computer networking. (NS)
-Supply and installation 3MP Dome IP Type CCTV camera of Hikvision/CP Plus/Dahua/ESSL company. (NS)
-Supply and installation NVR 16 port IP Type of Hikvision/ CP Plus/ Dahua/ ESSL company. (NS) +18%GST
-Providing and fixing of wall mounted modular Nos. workstations, with 1200 mm X 600mm one side full round post formed top, made of 25mm thick MDF/Plane Partical board,laminated with approved shade of post forming laminate of Merino/ Greenlam fixed using SWR D3 adhesive of pidilite only. Edges of table top shall be provided with machine pressed PVC edge banding 0.8 mm thick in matching colour. Table understructure with 25mm thick legs panel (upto 762 mm height fixed 1200mm divisions or as per structure requirement to fix the work station top) shall consist of standard 25mm thick MDF/Plane Partical board, laminated with approved shade of post forming laminate of Merino/ Greenlam fixed using SWR D3 adhesive of pidilite only. All edges of the understructure to be provided with machine pressed PVC edge banding 0.8 mm thick in matching colour with drawer pedestal width of three drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thick made of 18mm thick HDF board, laminated with approved shade of post forming laminate of Merino/ Greenlam fixed using SWR D3 adhesive of pidilite only, heat processed using roller heat press machine to better finish and long sustenance construction completely (bottom included) of size suitable to accommodate telescopic slides for smooth operation All visible edges of drawer trays shall have 2mm thick edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thick PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. It includes all the necessary discreet fitting to hold the weight of the table top and other structure evenly so that no sag or imbalance be observed.
-CCTV testing and commissioning charges.
-Providing and fixing of 1.5 ton split AC of Mitsubishi electric Daikin
-Providing and fixing copper pipe for split AC Units with double insulation.
-Supply & erection of Ceiling Fan 42" including connection wire & Labour charges
-Supply of Keyboard tray with telescopic channel of ebco company.
-Providing and fixing frosted glass film.
Bidder Name
Amount
Ms Santushthi Modulars(GSTN-06AGSPJ5404H1ZC)
Konarch Architects And Consultants(GSTN-NA)
Konarch Architects And Consultants
Konarch Architects And Consultants
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .