TENDER FOR RENOVATION WORK FOR LABOUR CANTEEN AT CDOT CAMPUS NEW DELHI

Amount

Section A (Civil Work)

Dismantling of wall tiles and disposing it at suitable place within the lead of 50 m as directed by engineer in charge.

Providing and fixing 1st quality ceramic glazed wall tiles 300 mm x 600 mm size or any other size conforming to IS: 15622 of approved make, in all colours, shades in skirting and dados, over 12mm thick bed of cement mixed with pigment of matching shade complete.

P/ fixing Granite skirting 100 mm wide inside the blocks with 18 mm thick granite stone with 1: 4 cement morter and desired pigment wherever required.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling aluminium partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

Providing and fixing uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and inline sash adaptor of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. all complete.Rate inclusive of fixing of Glass pans of 5mm thick , rubber gasket, beading etc. all complete.

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Superstructure work for roofing structure comprising of MS Tubular rectangular and square (as required) sections with the Systems of Purling and portals.MS Column of size as per Specification ,MS Truss Of Size As Per Specification ,MS Purlins of Size as per Specification with one Coat Red Oxide Primer. Make- Apollo ISI Thickness of MS Tubes are 3mm each as per government guidelines.

Providing and fixing of Factory made Roof PUF Panel, Panel Thickness- 40/70mm, Puf Type- PUR, Outer Sheet- PPGI 0.50mm TCT with 120 GSM,240 MPa with colour of RAL 9002 with Regular Modified Polyester with Guard Film, Inner PPGI -0.50mm TCT with 120 GSM, 240 MPA with Color of RAL 9002 with Regular Modified Polyester with Guard Film, Density- 40+/-2 Kg/Cubic M. The PUF Panel Shall be CFC Free and Zero Ozone depleting panel.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for canteen platform.

Steel reinforcement for R.C.C. work with Cold twisted bar including straightening, cutting, bending, placing in position and binding all complete (Kg)

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut Granite stone slab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters of required size, holes for services,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement: 4 coarse sand)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of Soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing & laying Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand)

Providing Painting with acrylic emulsion paint over the prepared surface in two coats to make it smooth finish.

Providing and applying 2 mm thick plaster of paris putty over the plastered surface to make it even all comp.

Grinding & Mirror polishing on marble work/Granite work/Kota stone work where ever required to give high gloss finish complete.

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes Concealed work, including cutting chases and making good the walls all complete. (Old pipes, fittings etc. has to be removed and making it proper for new installation)

20 mm nominal dia Pipes

150 mm nominal dia Pipes

Providing & fixing following sanitary fittings and fixtures complete, including cutting and making good the walls and floors wherever required along with testing & commissioning

P/fixing Bib Cock Cat No F400002 Hindware or equivalent

P/F angle valve Cat. No.: F570043 Hindware or equivalent

P/F Soap dish holder (F880011RGD Hindware or equivalent

P/F Drain Jali (cat F860056) Hindware or equivalent

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand)

Section B (Electrical Work)

SITC of 12 way 3 Phase MCB box, Makes: Scheneider/ Havells/Finolex

SITC of 63 Amp. 4 Pole MCB, Makes: Scheneider/ Havells/Finolex

SITC of 16-20 Amp. Single Pole MCB, Makes: Scheneider/ Havells/Finolex

SITC of 8 Modular PVC Plate, Makes: Roma/Anchor/ MK

SITC of 4 Modular PVC Plate, Makes: Roma/Anchor/ MK

SITC of 6 Pin Socket 16- 20A/6-10A twin type, 2 modular, Makes: Roma/Anchor/ MK

SITC of Switch 16A-20A 1-Moduler, Makes: Roma/Anchor/MK

SITC of 2.5 sq mm 3 core flexible XLPE Copper cable, Makes: Havells/Finolex/Anchor

SITC of 2.5 sq mm Single core flexible XLPE Copper wire, Makes: Havells/Finolex/ Anchor

SITC of 1200mm Sweep, BEE 5star Rated Ceiling Fan with BLDC, Insulation Class B, 3 Nos Blade, 350RPM

SITC of recessed type rectangular 250-260mm Sweep Inline Exhaust Fan 20-40W

SITC of 1" Dia Flexible Steel Conduit Pipe ISI

SITC of 1" Dia Flexible PVC Conduit Pipe ISI

SITC of 10 sq mm 4 core XLPE Armoured Copper cable, Makes: Havells/Finolex/Anchor

SITC of 6 sq mm 1C XLPE Armoured Green Copper cable, Makes: Havells/Finolex/Anchor

SITC LED Tube Lights 4' - 24W Makes: Philips/ Syska/ Havells

SITC of LED High Bay Light - 50W

MS Associate and Projects (BID ID -3201505)

Ambika Enterprises (BID ID -3202193)

INDO MEP CONTRACTOR AND ENGINEERS (BID ID -3201709)

NCI Global Infratech (BID ID -3199070)

K Plus M Space Solutions (BID ID -3201788)