PROVN OF STREET LIGHT TIMERS, DESERT COOLERS FOR TRAINEES AND OTEHR SANCTIONED WORKS AT CMM UNDER AGE B/R-I AND AGE (E/M) OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holder, bell,bell push,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS & Make of PVC conduit & conduit accessories - PLAZA /FINOLEX/BERLIA. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii Rate is inclusive of Cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator.

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board.

One bell/buzzer point controlled by one bell push.

All as per same in item No 5.01 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket out let 2 in one, 5/3 pin 5Amp.

S &F Switch socket combination 5 Amps 5 pin flush type.

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S & F Ceiling rose, urface baketile 65 x 50 mm three terminal.

S &F Call bell AC-230 Volt single pole ding dong.

S &F Bell push, flush type 5 Amps.

S & F Lamp holder insulated bodywith back plate,

S &F Electronic regulator 100/120 Watt step type

Note for Item No. 5 to 15 above. Make Havells/Strandred/Anchor/Leader.

S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 20/18 Watt, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 nos etc. Make- Crompten/Havells /Bajaj/Philliphs.

S & F LED light fittings decorative 36/34 Watt recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size and mounting clamps etc. Make- Wipro/Philliphs/Havells.

S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1x10 Watt, 2 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block ect. with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 no setc. Make- Crompten/Havells/Surya/Philliphs.

Taking down Old street light fitting & Supply and fix LED security light fitting of 45 watt, with high power LED & LED driver of make CROMPEN / Wipro/Philips/Havells.

Fabricate,supply & fix GI pipe bracket suitable for 25w security light fitting ,made out of 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt including Taking down of old U/S bracket.

Taking down ceiling fan /EXHAUST FAN of any size or make.

Hanging only ceiling fan 1200mm Sweep by providing fan hooks in proper manner and making connection withT 3 core copper cable including painting all as per specified and directed by Engr-in-Charge.

Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 6 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i) Two wires of 6 Sq mm and one wire of 6 Sq mm and one run of PVC conduit shall be measured as one unit.

MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T CAT NO-LTVD04MN/ / LEGRAND CAT NO-607913/ equivalent of ABB.

MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection grade,L&T CAT NO-LTSD08GN/ / LEGRAND CAT NO-607711/ equivalent of ABB.

Note for Item No 23 to 24 above. (i) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including frame made out of MS flat 40x5mm. (ii) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

Supply & fixing amp rating MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps.

Supply & fixing MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.

Supply & fixing MCCB TPN 160 Amps , 415Volts, 36KA ,4 POLE adjustable types.

Note for Item No 25 to 27 above. Make of MCCB & MCB - LEGRAND/ABB/L&T

Earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00 mm dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5 m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (Part-I).

Supply and fix Duct Air Cooler, with the follwing Specification

Model - Duct Air Cooler , Large

Material - Plastic,

Voltage- 220-240 V

Type - Evaporator

Capacity- 200 Ltr, (f) Power- 1 HP, (G) Speed- 1440, (J) Cellulose Pad thickness- 4 Inch

Water Tank- 200 Ltr, (l) Class romms Occupancy- 200 Person, (m) Control Model- Auto/ Manual

Fan Speed - 1350- 2400 RPM, (o) Working Temperature- (-60 to 80 Degree C)

Panel Thickness- 20mm, (q) Thermal Conductivity- 0.02 W/M.K, NOTE :- The frame of suitable size to mount the coolar and Aluminium flexible ducting with silver colour of dimention 40 x 10 x 10 CM up to 15 mtr in lengh from outlet of air cooler is included in coated rate with connected work. Seperate payment will made beyond 15 mtr of aluminium ducting as discribed in the in the note.

M&L of aluminium flexible ducting of silver of size 40 x 10 x 10 cm premium quality aluminium flexible pipe, 6 inch 6 feetwith free cowl cover 6 inch, aluminium pipes are madewithvery good quality aluminium sheet with aluminium suction chimney pipe extended up to 6 feet all as spesified and directed by Engr-in-Charge.

S&F 1.5 Ton 5 Star Inverter Split AC, 185V JZJT copper condenser, high ambient cooling, CO2 reduction, 3D-flow, self diagnosis with steady cool compressorall as spescified and direcetd by Engr-in-charge. Make Voltas/LG/Daikin.

S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 20/25 amp, flush mounting type LEGRAND/ABB/L&T cat no-DBMPS220SD.

S&F sumo 75 XL double decker air cooler with high efficiency honeycomb pads for superior, i-pure console with multistage filters all as spesified and directed by Engr-in-Charge. Make Symphony/Bajaj/Daikin.

Supply & fix 20 mm GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed by Engr-in-Charge.

Supply and fix 20 mm Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete all as spesified and directed by Engr-in-Charge.

S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch, frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE, thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c ) Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

S&F LED street light lumanaries of size 70 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/RR/Havells/Philips/Crompton

Supply & fix PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/RITTAL/HENSEL CAT NO K8350 .

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4.0 core complete all as specified and directed.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.

Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc. 25cm all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point all as specified and directed.

unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : maesurement shall be done after puning down of sand.

Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed.

Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 50 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA.

Surface excavation in hard/ dense soil n.exe 30 cm deep and averaging 15 cm deep and getting out.

Excavation in trenches n exc 1.50 mtr wide and n exc 1.50 mtr depth for foundation etc and getting out in hard/dense soil complete all as specified & directed.

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate foundation filling mass concrete.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for hard core of gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder complete all as specified and directed.

S & F tor steel or TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire ( annealed) not less than 0.9 mm dia

S & F TMT bars 5mm dia and over upto and incl 10mm dia , cut to length , bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire ( annealed) not less than 0.9 mm dia as in stirrups, spacer and binders.

M&L RCC M- 25 (Design Mix) (20mm graded aggregates) as in foundation, footing, foundation beam, plinth beam and base for column all as specified and directed.

M&L RCC M- 25 (Design Mix) (20mm graded aggregates) as in columns all as specified and directed.

M&L RCC M- 25 (Design Mix) (20mm graded aggregates) as in beams all as specified and directed.

M&L RCC M-25 (Design Mix) (20mm graded aggregates) as in slabs support on walls, beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed.

M&L for form work to sides of pillars , posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed

M&L for flat rough finished surfaces formwork to sides and soffits of floor or roof beam hunchings, girders bresummers, lintels, cantilevers, shelves, including supports overhangs etc also splays between floors and beams etc, rough finished surfaces of concrete etc all as specified and directed.

M&L for flat formwork to soffits of suspended slabs such as in roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) etc all as specified and directed

Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed.

Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified & directed.

M&L plastering in CM (1:6) 10mm thick on brick masonry walls and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces fished even and smooth w/o using extra cement.

M & L rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 on ceiling finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in path/plinth protection finished even and fair incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.

M & L glazed ceramic coloured/designer tiles in vertical surface of wall 350 x 250x7mm/ 450x350x7mm thick laid over & including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

M & L non skid ceramic coloured/designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors and 25 mm thick PCC type B-1 1:2:4 (20 mm graded aggregate) laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S & F sheet glass ordinary quality and glazing with oil putty n exc 0.5 sqm in each panr 3 mm thick etc complete all as specified and directed.

S & F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 250mm long.

S & F aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long.

S & F extruded aluminum alloy handles, fabricated type, anodized 150 mm long.

S & F Butt hinges, medium weight, cold rolled mild steel and fixed 100 mm long.

S&F vitreous China wash basin, white, flat back, size 580x450mm excluding taps, chain and plug and porcelain stopper but including brackets, waste pipe.

S & F in 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1:6.

S&F 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm dia bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls ceiings or in floors etc of 20mm bore complete all as specified and directed.

S/F in vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe).

S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed .

S&F vitreous China bowl urinal flat back, size jof 465x355x265mm white (minium), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms).

S&F in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (ISI Mark)

S&F 15 mm dia stop valves/angle cock, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed.

PVC (SWR) floor trap75mm, with grating including jointing with solvent cement.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors.

S&F 110 mm dia PVC (SWR) bends any radius.

S&F 75 mm dia PVC (SWR) bends any radius.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed.

M & L preparing plastered / unplastered new surfaces of walls and applying three coats of white wash on walls as specified and directed by Engr-in-Charge

M & L preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint over alkali resistant primer complete all as specified and directed.

M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

S&F in Soap dish, vitreous China white, approximate size 160x160x90mm.

S & F PVC connections 15mm size with PTMT nuts of length 450mm long.

Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 25 userscomplete all as specified and directed as per drg No CEJZ Sheet 1/4.

Supplying and laying of UPVC pipes (SCH-40) 150mm dia incl jointing with coppler complete.

Supplying and providing water proofing treatment over cleaned roof surface with Polymeric standard water proofing membrane, weight not less than 3kg/Sqm comprising of the following for Approachable roof. (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces/walls etc. (ii) Applying a coat of hot air blown bitumen of grade 85/25 grade confirming to IS-702 @1.2Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/Sqm on prepared surface. (iii) One layer of polymeric water proofing membrane of weight not less than 3 Kg/Sqm centre core of HM HDPE film of thickness 90 micron sandwiched with high polymeric high molecular and fusible film with 100mm over laps with sides and ends. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooves and making good with PCC gola 1:2:4 type B1 etc adhere to hot blown bitumen all as per manufactures instructions. (iv) Over membrane applying a coat of hot blown bitumen of grade 85/25 confirming to ISD-702 @ 1.2 Kg/Sqm. (v) Binding material such as sand in dry condition @ 0.75 Kg/Sqm minimum shall be dusted over bitumen complete all as specified and directed.

M&L for machine pressed precast concrete Interlocking paver block glosy finish in grey cement with pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade, of size shape colour and pattern as directed laid dry.

Schedule of credit amount of Rs 15,970.00 to be deducted during AOC

Skyline Encon

Goodluck Enterprises