Special repair and maintenance of Govt School building at Kadmath Island Phase III (Govt JNSSS)

Amount

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface).

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based of average thickness 1mm of approved brand and manufacture, over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.Water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

Providing and fixing fly proof wire guage to windows, clerestory windows and doors with M.S flat 15X3 mm and nuts & bolts complete. Stainles steel (grade 304) wire guage of 0.50 mm dia wire and 1.4mm aparture on both sides including necessary hinges and locking arrangements.

Tiles cleaning with acid including scrapping etc. as per direction of engineer in charge.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) confirming to IS :7231 with all fittings and fixtures complete. 10 litre capacity white colour.

Providing and fixing solid plastic seat with lid for pedestal type WC pan complete white solid plastic seat with lid.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead. For thickness of tiles above 25 mm and up to 40 mm

Providing and laying 10 mm thick vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws etc. as required all complete as per the direction of the Engineer in charge.

Sandring the existing door and window including smooth with sand paper etc as per direction of engineer in charge.

Applying priming coat with ready mixed pink or grey or brown primer of approved brand and manufacture on wood work ( hard and soft wood )

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sqm and below

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position - Second class teak wood ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing 30 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. Second class teak wood

Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size)

KUNHIHAJI B

UMMER BAITHULHUDA