IMPROVEMENT TO BUILDING NO. P-30 (AIRMEN BILLET) AND OPS ROOM INCLUDING SPECIAL REPAIRS TO VARIOUS GARRAGES AND ALLIED WORKS AT AIR FORCE STATION MOUNT ABU RAJASTHAN

Amount

Demolition of brick/stone/block/PCC block work masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down old APP membrane with plaster of existing water proofing treatment on roof surfaces etc. including removing debris out site of MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling plain or corrugated steel sheets of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.

Taking down of cement plaster or cement lime plaster of any description on PCC/stone surface/brick surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 2 Sqm each complete all as specified and directed.

Cleaning roof slabs/chajjas by sweeping with brooms, removing all depositions/mud/ vegetations etc complete all as specified and directed.

M&L for brick work built in cement mortar (1:6) using sub class 'B' old size bricks curved or straight in plan exc 6m mean radius complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix (1:3) complete all as specified and directed. complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course/padding, finished even and fair on roof/ chajjas etc complete all as specified and directed.

M&L for preparing new surfaces of roof and applying two coats of Polyurethene (PU) acrylic based Water proofing liquid compound over and including a coat of diluted elastomeric self primer with reinforcing fabric sheet as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed. Note :- Quoted rate shall be deemed to be included for work in buildings/ structure of any height.

M&L for 75mm thick cement concrete (1:4:8) type B-2 using 40mm graded stone aggregate as in floor sub base and sub course complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs,roof projection,chajjas, landings and similar work n. exc 200mm thick (horizontal/sloping) for flat rough finished surfaces of Kitchen platform shelf complete all as specified and directed.

S&F rolled mild steel work in tubular tresses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S&F Fe 410 -W (GdeE- 250) quality A rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Fe-290 (Gde E165) rolled mild steel work in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmens etc complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Fe-410-W Gde E-250 quality-A rolled mild steel in joist channel angle, tee sections, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50micron ) aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated ( minimum thickness of powder coating 50micron ) anodised aluminium windows and ventilators, fixed type without sash bars ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading ,screws etc complete all as specified and directed.

S&F powder coated ( minimum thickness of powder coating 50micron ) anodised aluminium Partition, fixed type without sash bars ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading ,screws etc complete all as specified and directed.

S&F powder coated ( minimum thickness of powder coating 50micron ) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and as directed.

S&F powder coated ( minimum thickness of powder coating 50micron) anodised aluminium doors shutters air tight with natural anodized alunimium frame with on or more rebate partly glazed and partly panelled with hollow profile PVC panelling of thickness 12mm (all aluminium member Top, bootom, vertical & middle of shutter made of size 82.55x44.45x1.80mm thick including necessary jointing cleats, glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading /glazing clip size 19.00x17.30x0.70mm, wt 0.097 Kg/RM of both side and fixing aluminium fittings i.e aluminium hinges 100mm three numbers, handles 200mm long two numbers, tower bolts 150mm two numbers and mortic lock with 06 lever fitting shoiuld be ISI marked complete in all respect as Engineerr-in-Charge. (Rates will also include making good floor /wall jambs of doors/ windows surface with plaster and match with existing finishes)

S&F S&F aluminium fancy type deco grill powder coated 4-5mm thick fixed to firmly aluminium sections, approved by Engineer-in-Charge .Note:- Necessry cleats/ any type channels etc can be paid and measured separately complete all as specified and as directed.

M&L for 10mm thick rendering cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on surfaces of fair faces of brick or concrete wall surfaces, mixed with water proofing compound, surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid for separately.)

M&L for 5mm thick rendering cement plaster in cement mortar (1:3) on fair faces of brick work or concrete surfaces or plastered surfaces of ceilings, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for machine cut kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors/ accesible roof slab including rubbing and mirror polishing complete over and including 20 mm screed bed in cement mortar(1:6) including final finish the surface with beeswax polish treating complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick over and including 10mm thick rendering cement plaster in cement mortar (1:4) as verticle surfaces, risers of steps, skirtings, dados and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

S&F Second class hardwood timber in clean sawn battens or fillets all as specified and directed.

S&F 5mm thick Solid PVC Wall Lining consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F 605mmx605mm grid size anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling complete all as specified and directed.

S&F 12mm thick Gypsum Board in ceiling fixed with screw as per manufacturers instructionscomplete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 1.6mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

S&F 25 mm Harrison rails (Curtain rails) of anodised aluminium alloy chromium with fixing brackets stops, rollers etc complete all as specified and as directed.g complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

M&L for 110mm cement concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as specified and directed.

S&F PVC (SWR) junction single, equal or unequal 110mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F wooden laminated flooring with a direct laminated surface (small embossed) traeated with aluminium oxide on top of high density fibre board having a click system tongue and groove joint. The plank shall be termite resistent and water protected with both sides laminated wooden flooring planks of size 1216mmx196mmx8.3mm thickness complete all as specified and directed.

M&L for providing and fixing skirting/beading /T-prifile/Reducer by others as per requirement at the site with matching or contrast colour for wooden laminated flooring complete all as specified and directed.

M&L for preparing of new surfaces of any description and applying two coats of oil bound distempering walls over and including a coat of alkali resistant and thin layer of wall care putty on plastered surfaces, complete all as specified and as directed.

M&L for preparing old decorated and plastered and other surfaces of walls by washing with water, rubbing down and stopping surfaces and priming plastered and other surfaces with 3mm thick wall care putty and and distempering walls with two coats of oil bound distemper complete all as specified and directed.

M&L for preparing of new surfaces of any description and applying two coats of exterior emulsion weather proof antifungal paint in camouflage pattern over and including a coat of primer complete all as specified and directed. Note - The work shall be got executed through appicator/skilled representatives ofthe manufacturer company upto any height of the building/structure using scaffolding and safety measures and any wihtout any extra cost to the Govt.

M&L for preapring new plastered or unplastered surfaces of ceilings by sceapping and washing and applying three coats of white wash complete all as specified and directed.

M&L for preapring new plastered or unplastered surfaces of walls by sceapping and washing and applying three coats of white wash complete all as specified and directed.

M&L for preparing new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqmcomplete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. to match with existing surfaces complete all as specified and directed.

M&L for concealed point wiring for one light point /ceiling or exhaust fan point/bell point/one socket out let 6 Amps 5 Pin on the independent board controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral)drawn in and including PVC conduit heavy duty and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 6 Amps 16 Pin on the independent board controlled by one switch one way switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) drawn in and including PVC conduit heavy duty by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLS copper conductor cable of 2.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

S&F Modular switch 6 Amp, 250 V, AC, one way one module complete all as specified and directed.

S&F Modular switch socket combination 16 Amp, 250 V, AC, one way one module complete all as specified and directed.

S&F MCBs single pole and neutral, 240 Volts 6 to 32 Amps, 10 KA "C" Curve series complete all as specified and directed

S&F sheet metal enclosures double door, single pole and neutral, 2 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.

S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F Aesthetically designed LED panel and 34 Watts, of size 2x2 LED light fittings with LED lightsfor surface mounting which provides soft light and glare free symmetrical illumination including twin core flexible copper conductor PVC cable connection of lights and connector whereever required. Make: Havells Model No PLANO2x2PLR34WLED865S or equivalent of same in makes specified in the Appemdix "B" of Particular Specifications here-in-after, as approved by the GE.

Dismantling existing 500/750/1000 litres capacity Solar Water Heating System including water supply and electric supply connections and stacking separately and refixing in same in position after roof repair work complete all as specified and directed. Note: Any damage caused to solar water heating system due mishandling will be rectified by the contractor without any extra cost to govt.

shri balaji trading corporation (BID ID -3150950)

Haritwal traders (BID ID -3150685)

M.S. ENTERPRISES (BID ID -3149400)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3150565)

naveen enterprises (BID ID -3141230)