Sub work. Supply, erection and commissioning of Reverse osmosis drinking water treatment plant for Common facilities block at Integrated Court Complex, Puducherry.

Amount

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 75mm diameter

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110mm diameter.

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Coupler - 110mm.

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single pushfit coupler - 110mm.

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm.

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee without door -75x75x75mm.

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 75mm bend.

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe.

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm.

Providing and fixing Stainless steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I.brackets and stainless steel plug 40mm , including painting of fittings and brackets, cutting and making good the walls wherever required - kitchen sink without drain board - 470x420 mm bowl depth 178mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete - semi rigid pipe - 40mm dia.

Providing and fixing M.S.holder - bat clamps of approved design to sand cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including cost of cutting holes and making good the walls etc. - for 100mm dia pipe.

Providing and fixing M.S.holder - bat clamps of approved design to sand cast iron / cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), including cost of cutting holes and making good the walls etc. - for 75mm dia pipe.

Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 20 mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall -40mm nominal outer dia pipes.

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 50mm nominal outer dia pipes.

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 50 mm nominal outer dia pipes.

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 40mm nominal bore.

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 50 mm nominal bore.

Providing and fixing gun metal non -return valve of approved quality (screwed end) - 50 mm nominal bore -Vertical.

Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 15mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank.

Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15 mm nominal bore.

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore.

Providing and fixing C.I. swing type single door Foot valve conforming to IS 4038 and ISI marked, with bolts, nuts, rubber insertion etc.,complete - 50mm dia.

Supplying and erection of 500m LPH RO water treatment plant with following technical specification (The Rate includes GST @18%) a. Raw water pump – 1 No., Model 0.5 HP Make CRI/Crompton/Sharp. b. Vessel-1 No.,Model:1465, Make: Aquanomics/Avantura c. Multi port valve – 1 No., Model: 40NB,Make:Initiate/UKL d. Housing 2 Nos., Model: Jumbo Industrial e. Filters-2 Nos., Model: Jumbo Spun f. Dosing pump – 1 No., Model:6 LPH, Make: E-dose/I- dose. g. Dosing tank – 1 No, Model L35 L., Make:White h. Antiscalent Dosing chemical with silica base – 20 L i. High pressure pump (vertical type) – 1 No., Model 2-18 Make:CRI/ Groundfos/Lubi. j. Membrane Housing (FRP) – 2 Nos, Model: 4040, MakeLALFA/UKL K. Membrane – 2 Nos., Model:4040, Make:Filmtec/CSM/Hydranatics. l. Flow meters – 2 Nos., Model: square, Make: Rapid. m. Panel Board – 1 No., Model:1-1, Make:Astero/I Panel. n. Floaty – 1 No o. Pressure Gauge – 2 No., Model:Oil, Make :Rapid. p. Pressure Switch – 1 No., Model: Danfos, Make: Danfos/ Equivalent. q. SS Kid – 1 No., Model: 40 mm , Make:SS304 Grade. r. Carbon – Activated, Make: 950 IV s. Pebbles, Differenct size t. Sand/Silex, difference size u. Pipe and fitting, Model:UPVC, make:Astral/Water tech. v. Providing and placing on terrace(at all floor levels) polyethylene water storage tank capacity 1000 lits with ISI specification marked in cover and suitable locking arranagement and making necessary holes for inlet outlet and overflow along with fitting and the base support for tank.(Make:Food grade materials with 3 layers Sintex/Aquatech).

sabastinmartial