Comprehensive repair and day to day maintenance of HT distribution network sub STN RMUs VCBs Panels Relays GOD switches HT cables and other EM works on different feeder and connected feeders under GE East JRC

Taking proper shutdown of HT feeder from respective Sub Station, RMU and CSS , checking, testing of HT OH line/11KV GOD on 4-pole structure . Opening/ disconnecting HT electric connections, removal of old jumpers by cutting of old rusted nuts, bolts & washers etc. Repairs/ maint of HT GODs on four pole structure by providing new lugs of suitable size including new nuts, bolts & washers etc. repairs to operating mechanism of 11 KV air break gang operating with necessary oiling/greasing to moving parts and to set right the alignment of Male/Female contacts for proper working including making HT feeder serviceable complete all as specified and directed by Engineer-in-Charge. Note :- (a) Quoted rates are included the cost of activities enclosed as per Annexure-I & II for 4 pole structures. (b) Minor consumable material required to complete the Job as per Annexure -II are included in the quoted rates any major parts to be replaced shall be paid against another items of schedule. Note: Jobs should be done when directed as per directions and report to JE after completion of part of job and report will be submitted. Penalty of Rs 1100/job/day if report not submitted for part of job at specified time. Contractor will provide all tools such as HT/LT Meggar, Insulation tester,wrench,rope,bamboo ladder,search light, gum boots, rain coat, safety gloves and other tools and will make them in working condition , will improve any other related electric wks which is considered essential by the deptt. if manpower is not available to perform job whenever directed, a penalty of RS 1000 per day will be levied. Execution of works as per Annexure-I for one 4-pole structure will be considered as one unit (one job) for the payment purpose.

Taking proper shutdown of HT feeder from respective Sub Station, RMU and CSS , checking, testing of HT OH line/11KV GOD on 2-pole structure . Opening/ disconnecting HT electric connections, removal of old jumpers by cutting of old rusted nuts, bolts & washers etc. Repairs/ maint of HT GODs on two pole stucture by providing new lugs of suitable size including new nuts, bolts & washers etc. repairs to operating mechanism of 11 KV air break gang operating with necessary oiling/greasing to moving parts and to set right the alignment of Male/Female contacts for proper working including making HT feeder serviceable complete all as specified and directed by Engineer-in-Charge. Note :- (a) Quoted rates are included the cost of activities enclosed as per Annexure-I & II for 4 pole structures. (b) Minor consumable material required to complete the Job as per Annexure -II are included in the quoted rates any major parts to be replaced shall be paid against another items of schedule. Note: Jobs should be done when directed as per directions and report to JE after completion of part of job and report will be submitted. Penalty of Rs 1100/job/day if report not submitted for part of job at specified time. Contractor will provide all tools such as HT/LT Meggar, Insulation tester, wrench, rope, bamboo ladder, search light, gum boots, rain coat, safety gloves and other tools and will make them in working condition , will improve any other related electric wks which is considered essential by the deptt. if manpower is not available to perform job whenever directed, a penalty of RS 1000 per day will be levied. Execution of works as per Annexure-I for one 2-pole structure will be considered as one unit (one job) for the payment purpose.

Taking proper shutdown of HT feeder from respective Sub Station, RMU and CSS , opening of HT cable from compartment of 5 way RMU and making good for any flash,carbon deposit on HT studs,moisture on sleeve,weak insulation of sleeve etc after opening of HT cable connection .After clearing all checks cable should be re-connected with new lugs of proper size complete all as specified and directed by Engineer-in-Charge. Note :- (a) Quoted rates are included the cost of consumables listed as annexure-II, any major repairs/spares shall be paid seperately. Note: Jobs should be done when directed as per directions and report to JE after completion of job and report will be submitted. Penalty of Rs 1100/job/day if report not submitted at specified time. Contractor will provide all tools such as HT/LT Meggar, Insulation tester,wrench,rope,bamboo ladder,search light, gum boots, rain coat, safety gloves and other tools and will make them in working condition , if manpower is not available to perform job whenever directed, a penalty of RS 1000 per day will be levied.

Taking proper shutdown of HT feeder from respective Sub Station, RMU and CSS , opening of HT cable compartment of 3 way RMU and check for any flash,carbon deposit on HT studs,moisture on sleeve,weak insulation of sleeve etc after opening of HT cable connection .After clearing all checks cable should be re-connected with new lugs of proper size complete all as specified and directed by Engineer-in-Charge. Note :- (a) Quoted rates are included the cost of consumables listed as annexure-II. For this job it is essential to deploy minimum ( 01 electrician and 01 helper) and they have to report to concerned JE at AGE E/M office and necessary record of attendance & wks performed will be maintained in register on regular basis with AGE E/M. Note: Jobs should be done when directed as per directions and report to JE after completion of job and report will be submitted. Penalty of Rs 1100/job/day if report not submitted at specified time. Contractor will provide all tools such as HT/LT Meggar, Insulation tester,wrench,rope,bamboo ladder,search light, gum boots, rain coat, safety gloves and other tools and will make them in working condition , if manpower is not available to perform job, a penalty of RS 1000 per day will be levied.

Attending day to day complaint of electrical supply for NO LIGHT in Cantt Area due to HT Fault lines breakdown, restoration of feeders by fault tracing/diagnosing, fault rectification of overhead lines, underground cables, junction boxes, busbar chambers, main distribution board of bldgs, LT panel, transformers, stablizers,or any other equipments etc by deploying one electrician and two helper to resolve complaint round the clock to execute the mentioned quantities, for restoration of FEEDERS for no light/ low voltage/ voltage fluctuation/current leakage/improvement of feeder or any other electric complaints given by concerned JE E/M/complaint cell due to any type of fault of overhead ACSR / underground LT/ HT lines, LT panels etc and making the complete electrical system functional including keeping the installations under AOR of concerned complaint cell neat and clean complete all as specified and directed by Engineer-in-Charge.NOTE No.1: Contractor will provide all the Electric tools, safety tools, ladders ,earthrod ,safety gloves,helmet,pliers,allenkey set,wooden ladder of sufficient number ,high beam torches or any conveyance required for day to day maintenance etc. NOTE No.2 :(I) NO COMPLAINT SHOULD BE ATTENDED WITHOUT T&P, SAFETY TOOLS AND DEPTT IS NOT BOUND FOR ANY MIS HAPPENING ON SITE.(II) Contractor will deploy skilled labour to attend complaint and having working experience on HT 11KV feeders for min 2 years(iv) Rs 500 penalty for not rectifying complaints within 2 hrs after receiving through complaint cell or through telephonically.(v)The contractor shall have to provide suitable means of conveyance for shifting of ladder,tools,if any reqd without any delay and any extra cost payable to him.(vi) Electrician and helper will be available to complaint cell telephonically or physically round theclock for rectification of fault.NOTE No.3 :Restoration of ONE FEEDER will be considered as one job from start to end point of HT supply.

Dismanteling the UNSV sign board in installations and supply and fixing retro reflector board of size 4ft x3 ft with high quality retro reflector tape blue base high intensity prismatic sheeting (HIP) grade white retro tape cutting good quality with 3mm thick ACP sheet base including 40mm x 40mm square size MS pipe duly painted all around the board appx 14 feet incl welding the MS flat plate of size 25mm x 3mm across the board and 40mm square size MS pipe legs to make overall board height of 10 ft including grouting the sign board in PCC 1:2:4 complete all as specified and directed by engr-in-charge. Note: Details/description of printing words will be provided by department.

M & L for taking out loop of HT/LT cable under the 4/3/2 pole structure and near plinth mounted transformer/CSS to carry out necessary civil work around the installation. (Note: Necessary civil work will be measured against other items of schedule. Taking out of loops of one cables shall be considered as one job)

M & L for Surface dressing n exc1 5 cm deep complete all as specified and directed (under 2/3/4 pole, CSS)

M&L for brick work sub class B old size bricks straight or cured in plan n. exe. 6.0 M mean radius built in cement mortor 1:4, complete all as specified & directed.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement, complete, all as specified and directed.