Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.0 LAccepted-AOC | ₹55.0 L | L1 | Accepted-AOC L1 |
| 2 | L1₹55.0 LRejected-AOC AT SALAGADIA PO MAJHIGADIA VIA PS KAPTIPADA DIST MAYURBHANJ | ₹55.0 L | L1 | Rejected-AOC L1 |
| 3 | L1₹55.0 LRejected-AOC AT PO BIJABANDILI PS AMBADOLA DIST RAYAGADA PIN 765020 | AMBADOLA | RAYAGADA | ODISHA | 765020 | ₹55.0 L | L1 | Rejected-AOC L1 |
| 4 | L1₹55.0 LRejected-AOC AT PASUDA PO PASUDA DIST MAYURBHANJA | BALESHWAR | ODISHA | 756028 | ₹55.0 L | L1 | Rejected-AOC L1 |
| 5 | L1₹55.0 LRejected-AOC | ₹55.0 L | L1 | Rejected-AOC L1 |
Tender Value
₹64.7 L
EMD Value
₹64,700
Closing Date
8 Dec 2025, 5:00 pmClosed
S.E R.W Division, Udala
S.E R.W Division, Udala
Construction of 02 Nos E Type Qtr at Sarat PHC in the District of Mayurbhanj.
2025_CERWI_122349_12
06(Onilne)/RWD/UDALA/2025-26
Open Tender
Civil Works - Buildings
270 days
SE RW Division, Udala
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹64,700
Yes
16 Apr 2026
2 Dec 2025
8 Dec 2025
2 Dec 2025
8 Dec 2025
2 Dec 2025
2 Dec 2025 - 8 Dec 2025
CIVIL Work
Earth work excavation for foundations in hard soil with initial lead and lift including levelling and dressing with all labour T & P articles, safety measures, incidentals, necessary required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Filling foundation and plinth with sand well watered and rammed including cost, conveyance of materials, labour T&P, royalty etc.complete as per direction of the Engineer-in-charge.
C.C.(1:3:6) in foundation and plinth with 4 cm size hand broken hard granite metal of approved quality from approved quarry including hoisting, lowering and laying in position in layers not exceeding 15cm thick with proper compacting the concrete by means of vibrator to proper slope and level including curing, dewatering shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty and taxes of all materials required for the work as per specification and direction of the Engineer-in-charge.
Cement concrete (1:2:4) with 12mm size HG chips of approved quality from approved quarry in foundation including hoisting laying concrete including royalty, watering curing etc.complete.
R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.
column base
Grade beam/Plinth band
Column & Beam
Lintel
Roof slab
Stair case
Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.
HYSD(Ground FLOOR)
Flyash.brick masonary in C.M.(1:6) in Foundation and Plinth with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.
In Foundation & Plinth
Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.
Brick Work in Superstructure
16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
16mm thick C.P(Ground floor)
12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
12mm thick C.P(Ground floor)
6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
6mm thick C.P(Ground floor)
Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.
Vetrified tiles(Ground floor)
Fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster(1:3) jointed with neat cement slury mixed with pigments to match the shade of tiles/marbles including rubbing and polishing etc. comp.
vertified tiles in dados(Ground floor)
Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc complete as per direction of the Engineer-in-charge.
Granaite tile(Ground floor)
Supplying, fitting and fixing MS Door & window shutter including cost of all materials etc.complete as per direction of the Engineer-in-charge.
Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.
Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials, labour and T&P etc.complete as per direction of the Engineer-in-charge.
Acrylic wall putty(Ground floor)
Finishing walls with plastic emulsion paints with any approved shade of paints and labour etc. complete.
Plastic emulsion paint(Ground floor)
Finishing wall surface with two coats of weather coat over a coat of primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.
Weather coat (Ground floor)
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 30mm x32mmx2mm @ 0.90mtr C/C and stainless steel square pipe bracing of size 32mmx32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing with cost conveyance royalties and taxes of all materials and labour etc.complete
Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transporting by mechanical means and unloarding the soil with a lead of 6km
1st Floor
R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.
Column & Beam
Lintel
Roof slab
Stair case
Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.
Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.
(Brick work in super structure) 1st floor
16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
16 mm cp (1st floor)
12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
12mm thick C.P(1st floor)
6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
6mm thick C.P(1st floor)
Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.
Vetrified tiles(1st floor)
Fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster(1:3) jointed with neat cement slury mixed with pigments to match the shade of tiles/marbles including rubbing and polishing etc. comp.
Vetrified Wall tiles(1st floor)
Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.
1st Floor
1st Floor
1st Floor
1st Floor
R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.
Column & Beam
Roof slab
Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.
Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.
16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
12mm thick C.P(1st floor)
6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.31 MB
Tendernotice_2.pdf
PDF • 8.46 MB
BOQ_568567.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid