21020/G/ARCAP/2021-22/01

Amount

Construction of Community Hall

M/L erth work in excavation in trenches and exc 1.5 mtr in width getting out in soil

M/L for PCC 1:4:8 type D2 40mm graded for fdn

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2.4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

M/L of form work to sides of fdn column columns, piers abutments, pillars, posts and struts (Base slab)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-mechanically treated bars

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S (non modular)bricks of class designation 7.5 in superstructure above plinth leel upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level 5:13:2 cement mortar 1:4 (1 cement :4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level 1:4:8 (1 cement:4coarse and :8 graded stone aggregate 40mm nominal size)

cement concrete pavement with 1:2:4 (1 cement : 2 corarse sand : 4 graded stone aggregate 20mm nominal size), including finishing complete.

15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and apply in a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 in stringers, treadslandings etc. of stair cases, including use of chequered plate wherever required, all complete kg

Stell work in built up tubular (round, square or rectangular hallow tubes etc) trusses etc including cutting, hoisting, fizing in position and applying a priming coat of approved steel primer coat of approved steel promer, including welding and bolted with special shaped washers etc, complete. Hot finished welded type tubes.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete

Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or surface fixed with pllymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel promer and two coasts of approved paint on overlappong of sheets Complete (upto any pitch in horizontal/vertical or curved surfaces), excluding the cost of purilns, rafters and trusses and including cutting to size and shape wherever requied. 0.63 mm thic with zinc coating not less than 275 gm/m2

Providing wood work in frames of false ceiling, partition tc. Sawn and fixed in position : 2nd class H/wood

Providing and fixing plain multipurpose cement board (Hihg Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete ( frame work to be paid separately): 6 mm thick cement board

Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 2nd class H/wood

providing & fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows, all complete with 4:0 mm thick glass panes

Providing and fixing ISI marked oxidized M.S handles conforming to IS:4992 with neessary screws etc complete : 125mm

Providing and fixing ISI marked oxidised M.S handles conorming to IS:4992 with necessary screws etc. complete : 100mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x 10mm

Providing and fixing bright finished brass tower bolts (barrel type ) with necessary screws etc. complete : 150 x 10mm

Providing and fixing ISI marked oxidized M.S sliding door bolts with nuts and screws etc, complete : 300 x 16mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work

Distemering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coats on new work Sqm

Finishing wall with water proffing cement paint of required shade : new work (two or more coats applied @ 3.84kg/10 sqm)

M/s Moon Enterprises