CERTAIN REPAIR TO TILLING, BOARDING, ROOFING, PANELING, CEILING AND OTHER MISC B/R WORKS AND REPAIR/ REPLACEMENT OF SANITARY FITTINGS AT OAF UNDER GE 970 EWS

Amount

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling old corrugated steel sheeting, any gauge, thickness, nainital or similar roof coverings, completed all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm in width and girth complete all as specified and directed.

S&F 6mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling boards of any description of any thickness including cover fillets complete all as specified and directed.

S&F for 6 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face and one face plain of required texture & colour fixed with nails to timber frame work for any surface fixed in repairs complete all as specified and directed.

M&L for 25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with nails and including dismantling of boarding any description, fixed in any position with nails including fillets complete all as specified and directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper fancy type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S&F in repairs Vitrous china wash hand basin, white, flat back of size 630 x 450 mm white excluding taps, and plug and porcelain stopper but including brackets, cutting for and pinning the ends of brackets, PTMT waste coupling & waste pipe as suitable complete all as specified and directed.

S&F in repairs brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs CP angle valves (half turn type) (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed.

S&F in repairs Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm dia CP Central Hole Basin mixer without Pop-up waste system complete all as specified and directed.

S&F in repairs 15 mm dia CP Sink Mixer with regular spout (W/M), complete all as specified and directed.

S&F in repairs 15 mm dia CP Wall mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower, complete all as specified and directed.

S & F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S & F in repairs Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. (Make : Plumber Cat Part No IT - 1904 ITALIAN / PearlCat Part No- HF -130/Jaquar Cat Part No - ALD-CHR-583)

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed.

S&F in repairs 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs Corner shelves fancy type complete all as specified and directed. (All as per sample kept in GE office)

S&F in repairs bathroom mirror cabinet (box type) complete all as specified and directed. (All as per sample kept in GE office)

S&F in repairs PTMT grating doom 100 mm dia (minimum weight 25 gms) complete all as specified and directed.

S&F in repairs towel rail 600 mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including PTMT waste copupling & waste pipe complete all as specified and directed.

S&F Stainless steel kitchen rack made of 1mm thick stainless steel sheet of size of size 900 x900 x 250mm complete all as specified and as directed.

S&F pvc waste pipe for kitchen sink and WHB of size 32/40mm dia upto 900 length complete all as specified and directed.

S&F Door closer hydraulically regulated aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Supply & fixing in repair Factory made Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, including sand cushioning 25 mm thick below paver block complete all as specified & directed. Note : The cost of sand cushioning shall be deemed to be included in rate quoted.

Notes :- An amount of Rs. 3,95,354.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/s A B CONSTRUCTION (BID ID -3201082)

M/S ADIL CONSTRUCTIONS (BID ID -3194893)

M/S GHULAM HASSAN KUCHAY (BID ID -3194889)

M/S MIR SAJAD ENTERPRISES (BID ID -3194581)

M/S maqsood enterprises (BID ID -3194600)

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS (BID ID -3194504)

M/S LATIF AHMAD BABA CONSTRUCTION (BID ID -3195005)

M/S B S CONSTRUCTIONS (BID ID -3194578)