Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹42.2 L+₹2.3 L (5.77%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹42.4 L+₹2.5 L (6.28%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹42.8 L+₹2.8 L (7.13%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹44.5 L+₹4.6 L (11.4%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹99,000
Closing Date
3 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
PROVN OF CERTAIN RW AND SPL REPAIR AT LALGARH JATTAN MILITARY STATION
2022_MES_560208_1
8933-44/22-23
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender documents
7 documents required · 7 mandatory
₹500
GE Lalgarh Jattan
₹99,000
Yes
2 Jan 2023
28 Oct 2022
6 Dec 2022
28 Oct 2022
3 Dec 2022
17 Nov 2022
Amount
Dismantling of brick tiles in floor or roof laid dry and pointed in cement mortar complete all as specified and as directed.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
Demolition of reinforced cement concrete of slab, manholes covers, platform, granite tiles of any description and in any position all as specified and directed.
Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings all as directed.
Dismantling Ceiling boards (Fibre, pulp,insulation etc) or insulation boards/slabs/blankets of any thickness including cover fillets
Surface excavation N.exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. and getting out soft/loose soil and n exc 10 sq m on plan complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth and n.exc 3.0 m depth for foundation, etc. and getting out soft/loose soil and n exc 10 sq m on plan complete all as specified and directed.
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface in Broken stone or boulders of compacted thickness.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete all as specified and directed.
M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:30 complete all as specified.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm as in roof including cleaning surfaces all as specified and directed
M & L APP based membrance minimum weighing 3 KG per sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torced application with APP membrane over 10mm thick screed bed in CM 1:3 mixing of WPC in mortar complete all as specified & directed.
Providing and Applying rising damp proof coating system with single component ready to use damp proof coating 1. Preparation :- Throughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc all large voids and hallow portions must be removed and re-plastered non moving cracks having width upto 5mm must be filled with polymer based crack filler. 2. Application :- Apply the first coat of Dr. fixit dampguard classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water), allow to dry for a minimum 2-3 hrs. apply one part of Dampguard mixed chemical and 2 parts of OPC white cement / Birla putty and make the putty, apply putty on the entire surface area, allow to dry for at least 3-4 hrs, apply the final coat of air cure 48 hrs proceeds for paints.
M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
M & L PCC (1:7:12) using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed
Supply only integrated water proofing compound complete all as directed by Engr-in-charge.
M&L brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
M&L brick work with fly ash bricks straight or curved on plan any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed
Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
S&F framed work as in chowkats of doors windows of angle iron ,gates or other section with gusset plates, rails, braces etc conforming to Gde Fe 410-0 or Fe 310-0 complete (Quality -A) all as specified and directed by Engr-in-Charge.
Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Three panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
Taking down chowkats or frames but with shutter without taking off shutter from the frame area n exc 1.5 sqm each but with shutters (without taking off shutters from the frames) and removing from site,complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm but not 2.00 sqm each including removing to store complete all as specified and directed.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S & F hold fast of flat iron conforming to Fe-290 or Fe 330 including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified & directed.
S&F aluminium handles anodised cast type 125 mm long all as specified & directed by Engr-in-charge.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.
S&F 100 mm long butt hinges extruded aluminium alloy with galvinised mild steel hinge pin, anodised and fixed type B-21 complete all as specified & directed by Engr-in-charge.
S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.
Taking down steel window of area n exc 1.50 Sqm and refixing in same opening after necessary repairs and provn of box type hinge in lieu of projective type hinges and MS tower bolt of 150mm incl welding, revetting etc complete all as specified & directed
S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as directed.
S&F as 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.
S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
S&F as 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.
S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
M & L for factory made steel windows in fix in repairs of conforming to IS-1038 with side hung shutters including box type hinges with 02 nos MS 100mm size barrel tower bolt for each leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed.
S&F in reapirs steel ventilator with top hung shutter incl hinges,handle, steel peg stay complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
M&L for Non skid coloured ceramic tiles (Joint less) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M & L for light colour Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for light colour Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on to vertical surfaces . set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
M&L glazed earthen ware tiles 108 mmx 108 mm x 6mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed
M&L glazed earthen ware tiles 108 mmx 108 mm x 6mm thick, vertical surface such as skirtings, dado, and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
M&L 20 mm thick granite of approved colour as in shelves/partition rubbed and polished, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding the edges half round on exposed side over and including 20 mm thick screed base in cement mortar (1:6) complete all as specified and directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed
Taking down cement plaster from brick wall or concrete surfaces or ceiling including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed
M&L rendering 15mm thick cement plaster on brick walls or concrete, surface in cm 1:6 and surface to be finished even smooth without using extra cement complete all as specified & directed
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and finished fair and even including mixing of WPC in mortar complete all as directed.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even without using extra cement complete all as specified & directed by Engr-in-charge.
M&L preparing newly/old plastered or pointed surface of wall and applying three coats of white wash on walls complete all as specified & directed by Engr-in- charge
M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty over a coat of primer including preparation of surfaces all as sepecified and directed.
M & L for complete removal of existing finishes and treating with two coats of acrylic distemper (any colour/tint) over a coat of alkali resistant primer over 3 mm thick wall care putty including rubbing with emmery paper to make wall surface smooth and even over a coat of primer complete all as sepecified and directed.
M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified & directed by Engr-in-charge.
M & L for complete removal of existing treatment and applying two coats of cement base paint on walls over a coat of alkali restant primer on wall surfaces all as specified and directed
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of new surfacesapplying with two coats of synthetic enamel paint ordinary tint all as spefified and directed
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of old untreated surfaces and one coat of synthetic enamel paint ordinary tint all as spefified and directed
M&L preparing new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engr-in- charge.
M&L preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint all as specified.
S&F 4 mm thick pin headed glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in -Charge.
Taking down eaves gutters and rainwater pipes (any size or any pattern), including all fitting, such as heads, shoes ,bends etc, including cleaning or refixing or removal to store etc.
S&F in repair 110 mm bore UPVC pipes single socketed in any length with rubber ring joints fixed to walls including necessary clamps complete all as specified & directed by Engr-in- charge.
S&F in repairs 450 mm long mild steel GI pipe, medium grade of size 40mm dia as in spouts pipe in sunken floor including making holes in RCC and making good with CM 1:1 or PCC (1:2:4) complete all as specified and directed by Engineer-in-Charge.
S&F PVC bend 110mm bore all as specified & directed by Engr-in- charge.
Supply & fixing in repair 100 mm bore cast iron (spun cast) pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
S&F in repairs cast iron type (spun cast) P trap/CPWD floor trap 100mm bore with CP grating including jointing to waste pipe fixed with necessary coupling arrangement complete all as specified and directed by Engineer-in-charge.
S&F in repair 100mm bore cast iron (spun cast) type door T equal/uneqal branch pieces (any radius) diminishing pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engineer-in-charge.
S&F in repair 100mm bore cast iron (spun cast) type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge.
S&F in repair 100 mm bore sheilding (ss) coupling (with epdm rubber as per requirement complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repair 75 mm bore cast iron (spun cast) pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
S&F in repairs cast iron type (spun cast) P trap/CPWD floor trap 75 mm bore with CP grating including jointing to waste pipe fixed with necessary coupling arrangement complete all as specified and directed by Engineer-in-charge.
S&F in repair 75mm bore cast iron (spun cast) type door T equal/uneqal branch pieces (any radius) diminishing pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engineer-in-charge.
S&F in repair 75mm bore cast iron (spun cast) type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge.
S&F in repair 75 mm bore sheilding (ss) coupling (with epdm rubber as per requirement complete all as specified and directed by Engineer-in-charge.
Supply & fixed Clamp for hanging/ fixed of 75mm/100mm hubless pipes complete all as specified and directed by Engineer-in-charge.
Taking down or up steel tubing and connections 15 mm bore of pipe, including cleaning for refixing or removal to store.
S&F 15mm bore Galvanised iron tube medium weight with all fitting fixed complete concealed to walls and ceiling or laid in floors, complete all as specified & directed by Engr-in-Charge.
Taking down steel tubing and connection including cleaning for refixing or removing to store bore of pipe 20 mm complete all as specified and directed by engr-in-charge.
S&F 20 mm bore Galvanised iron tube medium weight with all fitting fixed concealed complete to walls and ceiling or laid in floors, complete all as specified & directed by Engr-in-Charge.
Taking down steel tubing and connection including cleaning for refixing or removing to store bore of pipe 25 mm complete all as specified and directed by engr-in-charge.
S&F 25 mm bore Galvanised iron tube medium weight with all fitting fixed concealed complete to walls and ceiling or laid in floors, complete all as specified & directed by Engr-in-Charge.
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.
S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup fixed all as specified.
S&F in repair CP brass stop valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed all as specified.
S&F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including of all fitting complete all as specified & directed by Engr-in-Charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified and as approved by GE/Engineer-in-Charge.
S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as spd & dir by EIC.
S&F repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed all as specified.
S&F in repair vitrieous china wash down WC (Pedestal pattern) white and flush piple including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, Jet spry sheet cover etc., complete all as specified.
S&F vitreous china white wash down water closet pan, padestal pattern, white, including fixing bolts, but excluding flushing cistern and flush pipe and connection to drain (or out going pipe) etc. complete and making good to floor all as specified and directed
Supply only plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, seat and cover for water closet (European type) complete all as specified.
S & F in repair Vitreous china urinal flat back of size 465X355X265 mm white with grating & Union for discharge pipe including spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60 grms) but including flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc .
S&F in repair vitreous china wash hand basin coloured counter top (bowl type/oval shape) of size 560x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F vitreous china wash hand basin coloured flat back of size 580x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
S&F in repairs grating doom CP 100 mm dia of plated with waste hole complete all as specified and directed
S&Fin repairs 32 mm PVC waste down pipe suitable for WHB and urinal complete all as specified and directed by Engr-in-Charge.
S & F in repairs pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. (Wt not less than 450 gms)
Supply and fix pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in 15mm dia bore pipe all as directed.
S&F bib tap 15 mm dia, fancy type chromium plated, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule all as directed.
S&F 15 mm dia stop valve, fany type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe all as directed.
S&F in repair 10 litres capacity PVC valve less syphonic action type low level flushing cistern white with inlet incl flush pipe of low or high density of PVC 32mm dia, 90cm long and 15mm stop cock making connection incl ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long.
Supply & fixing in repairs PTMT swivel shower roses 125mm with or without swivel joints, including fixing to steel pipe or union fixed complete all as specified and directed by Engr-in-Charge.
Dismantling exc 250 but n. exc. 500 litre capacity any type of water tank and remove from site complete all as specified and directed by Engineer-in-Charge.
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. All as directed.
S&F 1000 litre capacity ISI marked rotational moulded tripple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed.
S&F in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe all as specified and directed.
S&F in repairs for 0.71 mm plain aluminum sheeting alloy 31000 H4 as in covering of expantion joint stappeled with self tapping screw including dismenteling of old any type of sheet complete all as directed by EIC.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L for 75 mm thick cement concrete type B-2 (1:2:4) (40mm graded aggregate) use as in plinth protection, and including necessary form work complete & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
M & L for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment and no pigment in floors/roof, and cut and polished complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to any length bent to shapes reqd. including hooking, bending and binding with mild steel wire (annealed ) not less than 0.9 mm dia all as directed.
,---ditto--- all as per srl item No 126 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
Suply only Fine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillet n.exc. 25 sq. cm all as directed.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weatjeromg.slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces all as directed
S&F mineral fibre accoustical suspended ceiling system with ANF (Micro look) EGE tiles with silhouette exposed grid. Colour shall lbe white, fire performance class 0/class 1 (BS 476) in module size of 600mm x 600mm x 15mm with bioblock coating on the face of tiles. Suitable for green building application with recycle content of 63%. The tiles shall be laid on silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68 kg/Sqm. Silhouette, main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. The Tee section have a galvanised of 125 gms/Sqm complete all as specified and directed by Engr-in-Charge. Make : ARM STRONG, AEROLITE, HUNTER DOUGLAS
M&L for reinforced cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate ) as in Chajjas; slabs all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete, type B1 1:2:4 using 20 mm graded stone aggregates in lintels upto 1.5m span, cills steps, seismic and other similar bands, plinth courses, copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, incl formworks all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
Formwork to flats sides, chajja and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete all as specified and directed.
S&F for powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm th) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings
S & F for Aluminium anodised (Powder coated) Three track sliding window frame with shutters (two glazed and one gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with 5 mm thick glass to aluminium frame work using rubber gasket fitted with screws and washers etc with the following section of frame and shutter (A) Sections for frame (i) Top and verticals 92 x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick
S & F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed
M & L for door closer hydraulically regulated of aluminium cast type , designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed other parts made of mild steel heavy duty and fixed complete all as specified and directed.
M&Ldouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivote made of brass, other parts made of mild steel heavy duty and dixed in floor complete all as specified and directed by Engr-in-Charge.
S & F 4 lever brass body mortice lock, vertical type, size 100 mm complete all as specified and directed.
S & F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for 4.0 mm thick figured glass, ordinary quality and glazing with aluminium snap beading of any size in each panes all as specified and directed.
S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified
S&F powder coated standard aluminium anodised grill size of mesh 75mm x 75mm and 8mm thick section using U channel 25x12mm all as specified and directed..
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or grade E- 165 complete all as specified and as directed
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F in repairs for stainless steel rods, standarad quality, not less than 28mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
M & L for 19 mm thick Plywood, grade BWR, type BB, with decorative face veneers on both faces; and fixed with screws to timber frame work complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps fix with wooden/ plywood and all as specified and directed.
S&F in repair for 100 mm long extruded aluminium alloy handle, fabricated type anodised all as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
M&L for damp proof course 40 mm thick in Cment concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork all as specified and directed.
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm all complete as specified in soil.
Removing excavated materials n.exc 50 m and depositing where directed at leveln.exc. 1.50 m above the starting point all as directed.
M&L for sand filling in floors or in foundations including watering and consolidation all specified and directed
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface in Broken stone or boulders (15cm compacted thickness). Note : Compacted thickness shall be measured for payment purpose
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F 110 mm dia PVC (SWR) bend any radius all as directed.
S&F 75 mm dia PVC (SWR) bend with access door any radius all as directed.
S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door any radius all as directed.
S&F 110 mm dia PVC (SWR) vent cowl all as directed.
S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc all as directed.
M&L PVC (SWR) gully trap 125/110 mm, sing and jointing with solvent cement all as specified and directed.
Cutting into existing manholes for connection of new drain making pipes and rendering cutting out existing benching & forming branch channel in PCC 1:2:4 type B1 smooth finished & forming benches as reqd etc for 150 mm bore all as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet ®inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in below of DWCPE pipe line as a bed and provide required slope all as specified and directed.
Supply and laying DWCPE (SN8) 180 (OD)/150 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on PCC bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge Note : (PCC & Earth work shall be measured and paid separately).
Supply and laying DWCPE (SN8) 240 (OD)/200 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on PCC bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Note (PCC & Earth work shall be measured and paid separately).
Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces
M&L point wiring with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable in and including medium grade rigid PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light/fan point controlled by one switch and making good diturbed surfaces complete all as specified and directed by Engineer-in-Charge.
,---ditto-- all as per item No.184 above but for one three pin 5 Amp socket outlet (with 2 pin out let of 5 Amp also) on same board.
,---ditto-- all as per item No.184 above but for one three pin 5 Amp socket outlet (with 2 pin out let of 5 Amp also) on ind board.
,---ditto-- all as per item No.184 above but point wiring with 2.5 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
Supply and fix switch, piano type, Single pole, one way 5/6 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
Supply and fix switch, piano type, Single pole, one way 15 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
Supply and fix socket out let multipurpose use,3 Pin 5 Amp (with 2 pin out let of 5 Amp also) flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above)
Supply and fix socket out let multipurpose use,3 Pin 15 Amp ((with 3 pin out let of 5 Amp also)) flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above)
Supply and fix ceiling rose, PVC/Poly Carbonate isolated body surface bakelite 65 x 50mm, three terminals.
S & F LED light fitting 1 x 20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete.
Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LED of 09 watt complete all as specified and as directed.
Supply and fix exhaust fan steel body AC Single Phase 230 V of Size 300 MM Sweep with blades and frames and louvers complete all as specified and directed by Eng-In-Charge.
Supply and fix factory made, sheet distribution boards,SP & N 4 Ways double door, protection class IP-30 suitable for mounting MCB/MCCB, confirm to IS-13032, IS-8623, BS-5484 with min 200 Amps, copper bus bar, working on 240 V AC
S&F MCBs SP & N 32 Amp, 10KA in DBs (catered above) confirm to IS-8828 : 1996, IEC- 898 : 1995
S&F MCBs SP 6- 32Amp 10 KA in DBs (catered above) confirm to IS-8828 : 1996, IEC- 898 : 1995
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
S & F LED Street light fittings for use as building security light of 35 watt 230 V AC Outdoor type with high pressure die cast aluminium housing and heat resistantcomplete with driver lamp bracket with impact and corrossion resistant including thermal management in multiple optics complete with IP 65/66 Protection, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer complete all as specified and directed by Eng-In-Charge
M&L sand cushioning, with dry and clean fine locally available sand for underground cable 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all specified and directed by Engineer-in-Charge. Note : Punned thickness shall be considered for payment purpose.
M&L brick protection with sub class'B' brick laid flat across the cable complete all as specified and directed
Supply and fix XLPE insulated armoured heavy duty electric cable with Aluminium conductor 1100 Volt grade 10 Sqmm 2 core complete all as specified and directed by Eng-In-Charge
Supply and fix fan regulator electronic solid state with steps suitable for 1200/1400mm sweep ceiling fan working on 230 volt AC complete all as specified and directed
S & F 2x2 ultra modern designed LED luminaire LED light fitting 1 x 36 W, 230 V LED Channel with white acrylic cover incl making connection complete all as directed.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed
Supply and fix MCB SP 240 volt 40 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP & N 240 volt 63 amp 10KA complete all as specified and as directed.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
GOYAL ENTERPRISES
PAREEK AND COMPANY
Dashmesh Construction Company
M/S Shree Ram Enterprises
KHANNA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .