Creation of Room for Director Finance at 1st Floor of Head Office Building at Green Belt Park Gandhi Nagar Jammu

Amount

Engaged Labours for the shifting of furniture/goods before starting work and clearance of site

Demolishing Briick Work Manually/ by mechanical means icluding stacking of servicable material and disposal of un- servicable material within 50 m lead in cement mortar

Dismantling Partition Walls (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area beyond 3 sqm.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages

Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages

Providing and fixing Wooden Partition wall of approved design, made up of Frame of Sal wood, with 6mm thick plywood on both side surfaces finished with 1 mm thick mica sheets of approved make, shade and design icluding all fitting accessories complete.

12mm Cement plaster of mix on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surafce even and smooth complete.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Providing and Laying of under layer of Tile Flooring 40 mm thick Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 12.5 mm nominal size, crushed stone aggregate.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing plywood over existing Partition wall , with 6mm thick plywood finished with 1 mm thick mica sheets of approved make, shade and design icluding all fitting accessories and removal of old damged plywood/mica complete.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm including white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

ReProviding and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing C.P fittings of approved make etc

Waste Coupling

Bib Cock

Long nose Bib Cock

15 mm Angle Valve

Central Hole Basin Mixer

C.P Jet with Tube

C.P Health Faucet

C.P Gratings

C.P Soap Case

C.P Towel Ring

C.P Towel Rail

C.P extension nipple

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

Coupler 110 mm 12.59.1.2 110 mm

Single tee with door 110x110x110 mm

Bend 87.5° 110 mm bend

Providing and fixing G.I fittings of approved make etc

G.I Pipe 1/2"

Bends 1/2"

Unions 1/2"

Sockets 1/2"

Elbows 1/2"

Nipple

Disposal of Mulba/unservicable material beyond Municipal Limits

Provision for Hardware Items

S.S Door Handle 8"

S.S. Handle 6"

Tower Bolt 6"

Tower Bolt 8"

S.S Door Stopper

Door Closer

Door Sliding Bolt Set

S/F of Z Blind as per aproved complete Job.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply complete job

Supply, Installation, Testing and Commissioning of 250 mm sweep, Exhaust fan on the existing opning complete job.

Supply, Installation, Testing and Commissioning of wall mounted 3 star Inverter type Split Air-conditioning Unit of capacity 1.5 TR cold with all accessories complete job .

Supply, Installation, Testing and Commissioning of wall mounted automatic Stablizer complete job

Supply, Installation, Testing and Commissioning of Gyser 35 Ltr, 5 star Complete Job

NOTE :- 1) All accessories / apliances / equipments and the entire installation shall be carried out strictly in accordance with the Anexture -B attached to the tender (SBD Page: 10-13). 2) All accessories / apliances / equipments and the entire installation shall be guarantee /warrantee against DLP for a period of 24 months from the successful completion of said job . 3) Measurable quantitiesmay vary at the time of actual execution of the work and shall be allowed as per actual with in the estimated cost.

M/s Satish Ganjoo

NARINDER SINGH