Stengthening of SSK Leh (by way Installation and fixing of Audio Viusal System)(Under SDP)

SITC of dual channel Line array speaker with 2 x 10" LF, 1 x 3" HF driver, Frequency Response: 50-20Khz, Rms Power: 1000watt, Program Power: 2000watt, Dispersion: H100°xV10°, Max SPL (dB): 130, Connection: XLR, with inbuilt amplifier having output power: 2x1000W, Nominal impedance: 4 ohm, S/N: >95dBA, Damping Factor: >500, Protection: over voltage protection, overload, output protection,clip,limiter.

Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Makes: JBL, Promark, QSC, Electrovoice, L Acoustics, d&b Audiotechnik

SITC of 18" Active high power subwoofer with built in high dsp processor, frequency response: 35-120hz, Rms power: 1000W, Peak Power: 2000W, Max Spl:135dB, 2 x XLR input, 2 X XLR output, Damping factor: >500, S/N: >95dBA, It has a rigid metal grillebackend by an acoustically transparent foam in plywood cabinet strengthened with a hard wearing scratch-resistant balck polyurea coating.

Supply, installation, testing and commissioning of Active Two-way Small Format high SPL surface mount loudspeaker. The loudspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90 Hz - 18 kHz or better; Nominal Dispersion : 100°H x 100°V; Power handling of 500W peak or more; Sensitivity : 90 dB and the Max SPL : 119dB Peak or better; Nominal impedance of 8 ohms. The loudspeaker system shall be comprised of a Powder-coated finish stainless steel grille with Two-part spray polyurea coating Enclosure;Enclosure Material Exterior-grade plywood, Single 8" LF Driver and 1x HF Compression driver with at least 2" voice coil; U bracket shall be included. Approved Makes: JBL, Promark, QSC, Electrovoice, L Acoustics, d&b Audiotechnik

SITCof active stage monitor speaker with 12" LF, 1.75" HF, Frequency response: 55-20K, RMS Power: 600W, Program Power: 1200W, Max SPL: 132dB, Coverage angle: 90 x 70 deg, amplifier module output: 2 x 350W @ 4ohm, S/N: 95dB, Damping Factor: 500@100Hz, with overload protection.

SITC of active speaker with 2 x 6.5" woofers, 1.4" HF driver, Freq response: 60hz-20khz,Program Power: 400W, RMS Power: 200W, Coverage angle: 60 deg (HXV), Max Spl: 127dB, with inbuilt amplifier having power: 2 x120W, S/N: >95dB, Damping factor: >500.

SITC of 48 channel digital mixing console shall be designed for large-scale professional audio applications, offering high input capacity and flexible control. The system shall feature approximately 33 motorized faders and support up to 48 input mixing channels. It shall provide a minimum of 20 auxiliary buses and 8 DCA groups for advanced signal grouping and control. The console shall include not less than 32 analog microphone/line inputs using XLR/TRS combo connectors, along with at least 2 stereo line inputs (RCA or equivalent). It shall provide a minimum of 16 analog XLR outputs for flexible audio routing.

SITC of 16 x 16 DSP with Frequency Response: 20Hz～20kHz, Sampling Rate: 48kHz,24bit, Dynamic Range: >110dB, THD: ≤0.005%, Latency: 5.8 mS, Crosstalk: ≤-105dB, S/N Ratio: >110dB, Automatic Gain Control (AGC), Adaptive Echo Cancellation (AEC), Adaptive Feedback Cancellation (AFC), It includes a USB2.0 audio interface for recording and playback via a USB drive, Experience exceptional sound quality at 48kHz/24bit, 8 configurable GPIO interfaces, Phantom Power: DC 48±6V,10mA, Input Impedance: 2KΩ balance, Maximum Input Level: 20dBu.

SITC of Dynamic Supercardioid Vocal Microphone with Freq. Response : 35 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms.

SITCof Dynamic Supercardioid Instrumental Microphone with Freq. Response : 30 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms.