Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹28.9 L+₹1.4 L (5.16%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹30.0 L+₹2.5 L (9.24%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹30.1 L+₹2.7 L (9.71%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹31.3 L+₹3.8 L (13.9%)Rejected-Finance NEAR LIC OFFICE KALAIGNAR ARIVALAYAM SHOP ROOM NO7 GROUND FLOOR OF BACK SIDE PHOENIX BAY SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744101 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
7 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM
GE (AF) PALAM DELHI CANTT-10
ADDITION / ALTERATION TO BLDG NO. P-32 (16 SMQs) IN DOMESTIC AREA AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2024_MES_641441_1
GENP-67/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) PALAM
₹87,300
Yes
12 Apr 2024
8 Feb 2024
9 Mar 2024
8 Feb 2024
7 Mar 2024
22 Feb 2024
Amount
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each complete all as specified and as directed.
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.
Taking down shutter of any description area n exc 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.
Demolition of concrete in ground floor and paveings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.
Dismantling structural steel work including door, gates but excluding framed truss etc. complete all as specified and as directed.
M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel,slab,chaja pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size 100 x 100 mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar 1:3, average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar 1:3, mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement for guniting work, complete all as specified and directed. (Note :- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately as supply only).
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.
M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and fair mixed with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. Note:- (a) WPC shall be measured and paid separately under respective items of BOQ. (b) Necessary scaffolding up to (G+3 storey) shall be deemed to be included in unit rate.
S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.
Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in Framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.
S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.
S&F window/Ventilator section of frame (72 x 55) mm fixed to wall or concrete surface with MS hold fast (30 x 5 mm section) 150 mm long made of galvaniszed steel powder coated and section of shutter 47 x 20 mm, mulion section 72 x 50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60 mm including poweder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.
S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc half brick but not exc one brick thick, for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1complete all as specified and as directed.
S&F for clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified and as directed.
S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.
S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified and as directed.
S&F for aluminium sliding door bolt, 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S & F 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc and including dismantling boarding any description fixed with screws complete all as specified
S&F for sheet glass 4mm thick quality fixing to steel/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.
S&F for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
S&F in repair 20mm dia aluminium Drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.
Demolition of mud in roofs, any thickness, including plastering/ concrete and leeping (whether full thickness removed or only a part there of) and including taking down existing tarfelt complete all as specified and as directed.
Demolition of cement concrete from sunken floor, roofs, floors (other than ground floor hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MOD land complete all as specified and directed.
Demolition of reinforced concrete roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed.
M&L for providing reinforcement cement concrete nominal Mix using 20mm aggregate type B-1 (1:2:4) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.
M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required includidng cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia.or securing with clips complete all as specified and directed.
Description all as per item No. 37.00 above but 6 to 8mm dia bars as in stirrup complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.
Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and directed.
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x 7mm thick/ (450x300)mm x 7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in vertical surface/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.
M&L for cement concrete type E2 1:5:10 (40mm graded crushed stone aggregate) as in foundations, mass concrete and filling in sunken floor etc complete all as specified and as directed.
M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages : Stage 1: Providing 15mm thick plaster in CM 1:3 mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid .
M & L for 18 to 20 mm thick green marble (table rubbed and polished) as in steps, cooking platforms with and including over cement screed bed 15 mm thick CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including cutting and polishing complete all as specified and as directed.
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.
M&L for brick work with old size sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Supply only Integral Water Proofing compound complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.
M&L for preparing old surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistant primer complete all as specified and as directed.
M& L for preparation of new plaster surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and as directed.
M& L for complete removal of existing surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & including one coat of zinc chrome primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for provision 1 mm (min) thick cement base wall care putty applying on walls for smooth finish complete all as specified and directed .
M&L for provision 1 mm (min) thick cement base wall care putty applying on ceiling for smooth finish complete all as specified and directed .
M&L for 75 mm thick cement concrete type C1, (1:3:6) (using 20 mm graded aggregate stone aggregates) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work all as specified and directed.
M&L for providing 50mm thick (average) cement concrete (1:2:4), type B-0, (using 12.5 mm graded stone aggregate) as in roof padding to maintain slope etc complete all as specified and directed.
M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, finished even and smooth (b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.
M&L for cement concrete tiles 20cm x 20cm x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roof over and including 15 mm thick screed bed in CM (1:4) complete all as specified
Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.
M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.
M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 15mm with new fittings and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 20mm with new fittings and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to store complete all as specified and as directed.
S&F for 500 ltr three layyered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F for gun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Taking down AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
Taking down CI pipes of 75/80mm dia of any description including all fittings complete all as specified and as directed.
Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including suitable iron clamps at one meter of interval complete all as specified and as directed.
S&F for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.
S&F for 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with and including suitable iron clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed.
S&F for 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall with and including suitable iron clamps after every one mtr of interval complete all as specified and directed.
S&F for CI 100mm bends with door complete all as specified and as directed.
S&F for CI 100mm single branch piece with door complete all as specified and as directed.
S&F for CI 75mm bends with door complete all as specified and as directed.
S&F for cast iron cowls 100 mm size complete all as specified and as directed.
M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.
S&F in repairs for Cast Iron `P /S Trap 100mm bore complete all as specified and as directed.
S& F in repairs, salt glazed stone ware gully traps (150x150)mm size square mouthed type ‘P’ including CI cover complete all as specified and directed.
S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed.
supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, including brackets complete all as specified and as directed.
S&F in repairs vitreous china ware Wash Hand Basin, white, flat back of size (550 x 400) mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length etc complete all as specified and directed.
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repairs stop valve (half turn)15 mm dia cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and as directed.
S & F in repairs bib tap (half turn)15 mm dia cast copper alloy, chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair pillar tap (half turn) 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair of sink made out of stainless steel 1mm thick, drainage board kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915x460)mm bowl size (410X330X160)mm complete all as specified and as directed.
Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base, to be finished even and fair complete including use and waste of necessary form work complete all as specified and as directed.
M&L for Pre polished chequred cement concrete tiles of size (30x30) cm x 25 mm thick, set, jointed and pointed with neat cement slurry with pigment as in floors with and including 20 mm thick screed bed CM (1:4) complete all as specified and as directed.
S&F stairs (framed) Including stringers, treades, landing, balusters, hand rail ,nosing in steps etc. including cleats, brackets,etc. complete all as specified and as directed.
M&L for 40 mm thick cement concrete (1:2:4) type B0, (using 12.5 mm graded stone aggregate) as in flooring, surface finished even and fair complete with and including necessary use and waste of form work complete all as specified and as directed.
Removing demolished materials etc (other than spoil) to a distance exc 1.00 KM and n exc 1.50 KM including loading, unloading and stacking etc. complete all as specified and as directed.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed.
Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete for the following all as specified and as directed:- (a) One light point controlled by one switch one way
(b) One fan/exhaust fan point controlled by one switch.
(c) One socket outlet 5 Amp controlled by one switch on independent board
(d) One 3 pin 5Amps socket out let point on the same board controlled by one switch
Description all as per Srl item No 107.00 but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.
Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed.
Supply and fixing of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Supply and fixing of stepped fan regulator 300 watt, 230 volts, 50 HZ, AC complete all as specified and as directed.
Supply and fixing of switch piano flush type 5 Amps, single pole one way complete, all as specified and directed.
Supply and fixing of socket out let 3 pin 5 Amps, flush type complete, all as specified and directed.
S&F of switch piano flush type single pole one way15 Amps complete, all as specified and as directed by Engr-in-Charge.
Supply and fixing of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed.
S&F of Indoor decorative LED battens- integrated type 20 watt 4 feet white fixture suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
S&F LED bulb 7 watt fixed in pendent holder/ bulk head complete all as specified and directed.
Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.
Supply and fixing of vertical type load line distribution board, double door ,6 way, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accomodation of MCCB 100/125 Amp, 16KA 4 Pole as incomer complete all as specified and as directed.
Supply and fixing for MCCB, 4 pole 125A, 16KA, complete all as specified and directed.
Supply and fixing of MCB, SPN, 40A ,10KA complete all as specified and directed.
Supply and fixing of MCB, SP, 6-32A ,10KA complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continous earth wire complete all as spd and directed by Engr-in- Charge. Note:- Two core of main wire 6 sqmm, one core of 6sqmm earth wire and PVC conduit shall be measured as one run.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2020) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.
S&F of LED bldg light highy efficient high power LED bldg light fittings 45 Watt with powder coated pressure die cast Aluminium with heat resistance toughened glass lens with internally prewired incl electronic driver and connecting up with three core flexible Copper conductor 1.5 sqmm cable complete all as specified and direted.
S&F of GI pipe light grade 40 mm dia bracket to make L type for bldg light fitting complete all as specified and direted.
S&F of MS flat clamp of size 30mmx5mm thick including nuts, bolts and washer suitable for bldg light fitting complete all as specified and as directed.
JAIPAL AND BROTHERS
ETERNITY PROJECT
M/S Davinder Kumar
RK TRADERS
SACHDEVA ENGINEERING WORKS
DEV TRADERS
SHYAM ENTERPRISES
SHEELSONS ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .