PROVN OF DISTRIBUTION PIPE LINE FOR SEWAGE TREATED WATER FROM SANJOG CHHETRI VIHAR ST P TO AMC C AND C TRG AREA AND PROVN OF SEWAGE TREATED WATER PONDS AND ALLIED WORKS AT AMC C AND C AREA UNDER AGE (E/M) HOSPITAL OF GE (E/M) LUCKNOW

Amount

Supply , Commissioning ,installation and Testing Submersible Pump set 3 phase 415 V, 10 HP including electric connection , suction 100 mm and discharge 100/110 mm with complete accesorries all as specified and directed.

Supply, laying, jointing, testing and commissioning of PVC Pipe of size 160 mm dia, PE 100, 0.6 Mpa confirming to IS 4985-2000 including special, grade in any length, with flanged ends including fittings (Bend, Elbow, Tee, etc) and laid in trenches/fixing on wall/floors complete all as specified and directed.

Supply and fixing butterfly valve outer dia 150 mm dia (wafer type) lever operated class PN-1.0, S.S-304 Disc, Nitrile/EPDM rubber lining including making new flanged joint with 3mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer of suitable size complete all as specified and directed.

Surface excavation in soft/loose soil n'exc. 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

All as per item No 5 here-in-before but depth exc 1.5 m and n.exc 3m.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and diected.

Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed.

M&L for construction of valve chamber 1050 x1050x1050 mm internal dimensions, 3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 6 mm thick with lifting hook and locking arrangement with brass pad lock of 65 mm dia with triplicate keys complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces complete all as specified and directed.

Supplying and laying or fixing in replacement, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 4 core,complete all as specified and directed laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness shall only be considered for payment

M&L laying of well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified and directed.

Laying only old burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified and directed.

Supplying and fixing 40 mm bore Galvanised mild steel pipe /tubing, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note:Excavation & Earth work shall be measured and paid separately)

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 mm c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L plain cement concrete 1:3:6 type-C2 using 40mm graded stone aggregate in foundations, filling and mass concrete including cost of form work complete all as specified and directed.

M&L for Brick work with subclass-B bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified & directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid WPC ISI mark complete all as specified and directed.

M & L aluminium water bar complete all as specified and directed.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, complete all as directed.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all as directed.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all as per directed.

M&L for concrete bed to drain pipe 150 mm dia with plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate including packing under and completely surrounding pipes with concrete after they are laid and tested; in trenches complete all as specified and directed.

M&L for fixing/laying 3-layer PP-R (Polypropylene random copolymer) pipes 160 mm dia bore SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.

M & L PCC 1:2:4 type B-1 Using 20 mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering , slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L 50mm thick PCC 1:2:4 type B-1 Using 20 mm graded stone aggregate as in flooring finishing surface of concrete even and smooth with using extra cement complete all as specified and directed.

M & L Reinforced Cement Concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as in slabs supported on walls and in shelves etc and the like complete all as specified and directed.

M & L Form work to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick fair finished flat complete all as specified and directed.

S & F TMT reinforcement bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed.

M&L for 150 mm dia CI spun inlet pipes / vent pipes etc complete all as specified & directed.

M&L for 25mm dia GI inlet pipes heavy class etc complete all as specified & directed.

M&L for structural steel for framed work such as manhole covers, frame , bracings etc complete all as specified & directed.

Supply & fixing 3 metre inner dia of 40 mm GI pipe ring with arrangement of 12 at same distance and 02 no on centre point, numbers SS Sockets, stands, flanges, supports, cross link of pipe centrally complete all as specified and directed.

Supply & fixing crown jet nozzle angle adjustable with ball joints of chrome plated brass complete all as specified and directed.

M&L for entire plumbing work with UPVC 10Kg per sqcm, 6Kg per sqcm pressure and fittings such as elbow, Tee, Socket, Reducers, Flanges, FTA, MTA, Union, Teflon tape, Solvent cement, control valve etc complete all as directed by the Engr-in-charge.

Supplying, laying, jointing and testing in replacement, LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 50 sqmm cross sectional area, 3.5 core laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed.

M & L for 20 mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S & F PP-R ball valves ( brass insert) 40 mm dia all as specified and directed

S & F PP-R ball valves ( brass insert) 20 mm dia all as specified and directed

Supply and install of open well submersible electric driven pumpset 5 HP, Suction/Delivery - 40 x 50 mm,head - 40 mtr, 3 Ph, 440 Volt, 50 HZ complete all as specified and directed. Make : Kirloskar Model No KOS 550+ or equivalent from list of makes

S & F Air break push button on/off operated fully automatic DOL starter suitable for upto 5 HP motor 415 volt, Make : L&T/Siemens or equivalent all as specified and directed.

Supply and fixing water proof submersible flat copper cable 4 Sqmm 3 core, 3 phase, 440 Volts. all as specified and directed.

Enviro India

Divya Jyoti Constructions

M/S PASHUPATI TRADERS

M/S CLASSIC ENTERPRISES

M/s I C Sharma and sons