Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.4 L+₹51,660 (1.85%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹29.4 L+₹1.5 L (5.23%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹30.3 L+₹2.4 L (8.45%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹30.4 L+₹2.5 L (8.96%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹28.1 L
EMD Value
₹56,200
Closing Date
9 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MIS) MHOW
Garrison Engineer (Maint) Inf School Mhow
PROVISION OF PATIENT RECEPTION AREA AND WAITING AREA FOR JCOS ORS FAMILIES WITH TOILET AT MDC MHOW
2022_MES_517379_1
8463/GE (MIS)/MHOW
Open Tender
Civil Works
Item Rate
180 days
GE (MIS) MHOW
As per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE (MIS) MHOW
₹56,200
Yes
22 Jun 2022
8 Apr 2022
12 May 2022
8 Apr 2022
9 May 2022
25 Apr 2022
60 days
Amount
B/R Portion
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc and n.exc 10 Sqm on plan getting out in hard/dense soil, complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed
M & L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed.
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed.
M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, finished fair complete all as specified and directed
M&L for RCC M 25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. NOTE : Reinforcement shall be measured and paide separately under relevant item.
Returing, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed.
M&L for sand filling under floor including watering and consolidation complete all as specified and directed.
Removing excavated material (soil) to a distance not. exceeding. 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. NOTE : Reinforcement shall be measured and paid separately under relevant item.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed.
M & L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.
M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified and directed
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, lintel, chajjas, etc over 1.5m span etc complete all as specified and directed. NOTE : Reinforcement shall be measured and paid separately under relevant item.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc for rough finish of concrete surface complete all as specified and directed.
M & L for use and waste of timber Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and directed.
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed. NOTE : Reinforcement shall be measured and paid separately under relevant item.
M&L for moorum / red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 25mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed.
M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.
M&L for rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface mixed with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound shall measured and paid separately under relevant item).
M&L for rendering 5mm thick in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
S&F factory made moulded PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
S&F fabricated coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.
S&F aluminium coloured power coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .
S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.
S & F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.
S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.
M & L for applying two coats of Superior quality oil emulsion distember over newly plastered prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under Ser Item No. 38.
M & L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of approved shade (@ 1.67 litre/10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) of same make over a coat of putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under Ser Item No. 38).
M&L for preparation of newly plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified and directed
M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.
M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
All as per item No 41 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified and as directed.
M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.
M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conforming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.
M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed. NOTE : WPC shall be measured and paid separately under respective item.
M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.
M & L for applying two coats of tack coat of industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm for each coat including cleaning surfaces complete all as specified. NOTE : First coat for bonding material below the membrane and second coat on top of membrane.
M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane Manufacturer.
M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment including preparation of surface as on non assesible area complete all as specified and directed.
Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GE.
S& F Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) double layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.
S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed.
All as per item no 52 above but 20mm bore complete all as specified and as directed.
S&F CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.Make-Plumber/Essco of jaguar(Economical Range)
S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make-Plumber/Essco of jaguar(Economical Range)and directed..
S&F fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make-Plumber/Essco of jaguar(Economical Range)
S& F CP toilet paper holder complete all as specified and as directed.
S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .
S&F PVC valve less,syphonic action type flushing cistern of 10 litres capacity, low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. .Make-Plumber/Essco of jaguar(Economical Range)
S&F health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified and as directed.Make-Plumber/Essco of jaguar(Economical Range)
S & F vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .
S&F Vitreous China urinal, half stall type,white with grating and union for discharge pipe, urinal spreader with waste pipe including all fittings for urinal, complete all as specified and as directed
S & F PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.
S&F PVC waste pipe for urinal/wash basin 32mm bore 800mm long complete all as specified and as directed.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. (Minimum Weight 210 gms) complete all as specified and as directed
S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and minimum 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.
S&F for MS steel Hollow Section work in tubular trussies, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.
M&L for Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round as 3/3 section) in cement concrete 1:2:4 type B1 smoth finished and reforming benching as required for 150 mm pipe complete all as specified and directed.
M&L for (SGSW) drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.
M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested internal dia of pipe 150mm complete all as specified and directed .
M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in precast manhole cover slab and soak well cover slab etc set in cement mortar (1:4) etc with and including necessary form works complete all as specified and directe. Note:-Reinforcement shall be measured & paid separately under relevant item.
M&L for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, of drains etc complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping/benching etc including necesarry form works complete all as specified and as directed.
S&F PVC prelam sheet wall/ceiling paneling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fix the strip to the wall vertically at an equal interval of 10” between two PVC strip. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent complete all as specified and as directed
S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed
S & F Anodised aluminium snap grid frame work of size 605mmx605mm for false ceiling with and including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
M & L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.
M&L for Preparation of new steel surface of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
E/M Portion
M & L for Point wiring with FRLS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping shall be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch.
One light point controlled by one switch
One Exhaust fan/Ceiling Fan point controlled by one switch
One 5amps socket out let point controlled by one switch on same board with other switches.
One 5amps socket out let point on independent board controlled by one switch.
All as per item no-81 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.
S&F switch piano flush button single pole one way 6 Amp 240 volt complete as directed.
S&F socket outlet flush type 5 pin, 6 amps, 230 volts complete all as directed.
S&F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.
S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.
S&F ceiling rose surface bakelite three terminal complete all as directed.
Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro
Supply and fix integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro
M&L for Sub main wiring with two runs of single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engineer-in-Charge.
S&F LED ceiling light fittings 34/36 watt recess mounting type 2'x2' luminaire complete with driver duly connection wire etc complete all as specified. Make Crompton Cat No. LCTLRN-36-FO-CDL, Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells Wipro.
M&L for Sub main wiring with four runs of single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engineer-in-Charge.
S&F LED street light fittings 1x25 /30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. ENXTP30LWHSYPCSD or other equivalent in Havells .
S&F double door SPN DB 8 way of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed.
S & F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.
S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed. by Engr-in-Charge.
M & L for Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C1 with 40 mm thick RCC 1:2:4 type B1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.
S&F Exhaust fan 200mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engineer-in-Charge. Make : Havells Model: Ventil Air-DX white or other equivalent in /Bajaj/Crompton
S&F ceiling Fan fan 1200mm sweep, 5 star Rating BLDC , AC single phase 230 Volts, including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc complete all as specified and directed . Make : Havells Model: Efficiencia Neo (BLDC 26W) or other equivalent in Bajaj/Crompton.
SATHI ENTERPRISES
M/S Sunshine Construction
Goyal Construction
ms shrilaxminarayan and sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .