WBPWDTE/EE/BED/NIQ_36/Q of 2025-26

Amount

i) Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board (Size(L) 35 ft (W) X 6 ft (H) 10'')- 1 and 6ft x 4ft x10"-6 nos Nos Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both size ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic ACAST sheet. The following letter font shall be in horizontal line as mentioned. iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD --- 1. LED colour : White/ Red/ Blue (make-samsung /Nichia /Cree/Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6. Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65 v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature ix) cost of carrying the LED sign board from work shop to site

The board should be fixed on 35'x6'x1' iron frame, holding the board by 1" squar hollow shape iron frame attached to each other making a one square feet frame by zigzag welding.Making arrangement for scafholding upto 2nd floor level at the gate .S/F of 32mm steel channel on the complete edges.The letters will be fixed on the board by the steel nuts & bolts etc. Additional arrangements to support the board by 2 nos 15 ' iron frame structure made of 1" iron square ,the iron structure grouted on 5'x3'x2' (HxDxW) concrete block visible 2' above the ground as per requirement,loading the complete board from manufacturing unit and carrying to the site ,unloading the board and lifting it to the top of the gate by manpower and fixing on proper place.

S&F sheet metal loop box of size 8"x6"x4" made of 14 SWG CRC sheet with hing type door and door locking arrangement incl S&F of 250V 3 way AC/DC make bakelite terminal in conceal in wall after cutting the wall & mending good damages.

Supply & Laying of 2 core 10 sqmm PVC/A cable in underground trench as per GS and leveling up & restoring surface duly rammed. (Make:-RR kabel/Gloster/Havells/Polycab)

Supplying & fixing compression type gland and finishing those for following XLPE/PVC armoured cable (2/4/3.5) core as per GS. 2 Core 10 Sq mm [7(d)/F4 & 8(b) /F5]

supply and fixing of gate light 26watt cat no- BGP200LED26C/WW/NW PSU GRCPCSPD MAKE- PHILIPS /CROMPTON/BAJAJ/Surya

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC

Supplying & fixing on existing downrod 4 feet single commercial LED type fluorescent light fittings complete with all accessories with 1 x 18 Wt.Master LED Tube Cat No. 18W MAS LED Tube 865T8 (Pc) 2100 lm and tube fittings Philips make cat No. TMC-501 P 1xTLED 22 W P3241 corresponding to Wipro / Bajaj / Crompton as per direction of EIC.

Supplying & existing downrod 4 feet twin commercial LED type fluorescent light fittings complete with all accessories with 2 x 18 Wt.Master LED Tube Cat No. 18W MAS LED Tube 865T8 (Pc) 2100 lm and tube fittings Philips make cat No. TMC-502 P 2xTLED 22 W P3242 corresponding to Wipro / Bajaj / Crompton as per direction of EIC.

supply and fixing surface mounted light 2' X2' on office area cat no- LCTLSNE -30-FO-CDL MAKR-CROMPTON /PHILIPS for office area.

S&F of 90W LED street light on the pole arm Make Crompton Cat no CRP-409-70-57-SL-GL-NSG. Or equivelant make of Philips/Bajaj/Surya.

Supply & Laying of 4core 16 sqmm PVC Alluminium Armoured cable in surface by saddle as per GS and leveling up & restoring surface duly rammed. For replacement of damage cable at sub-staion street light cable (Make:-RR kabel/Gloster/Havells/Polycab).

Supplying & fixing compression type gland and finishing those for following XLPE/PVC armoured cable (2/4/3.5) core as per GS. 4 Core 16 Sq mm [7(d)/F4 & 8(b) /F5]

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

R.K.ENTERPRISE (BID ID -7637946)

RS SYSTEMS AND PROJECTS (BID ID -7597283)