THE WORK AGAINST SANCTIONED PACKAGE 70/2020-21

Amount

fo|qr uxjh; forj.k [k.M&prqFkZ] xksj[kiqj ds vUrxZr tek ;kstuk ys[kk'kh"kZ esa Lohd`r iSdst la[;k 49@2020&21 ¼ch0vkj0Mh0 esfMdy dkyst ifjlj eas fLFkr 500 ‘kS;k;qDr cky jksx fpfdRlky; gsrq 4000 ds0oh0,0 fo|qr Hkkj ds la;kstu ds fo|qrhdj.k dk dk;Z ds fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k%&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

3x300 mm² XLPE 33 KV Cable

S.T. Pole 11 Mtr. long

ACSR Dog Conductor

33 KV 3x300 mm² XLPE Cable Jointing Kit Indoor/Outdoor

33 KV Dropper Angle

33 KV Top Channel

Stay Complete

Earthing Complete

Straight Through

Cross Bracing Angle

33 KV Lighting Arrestor 3 Nos Set

33 KV Disc Insulator (Polymeric)

33 KV Disc Fitting of Panther

33 KV Disc Fitting of Dog

33 KV Pin Insulator (Polymeric) with pin and nut

33 KV Bus Isolator

33 KV Line Isolator

Strucutre for 33 KV Bus isolator

Strucutre for 33 KV Line Isolator

33 KV Post Insulator

Structure for 33 KV Post Insulator

33 KV VCB with Single T/F Control panel and CT 200/100/1 A with Structure [1-33KV VCB, 2- Control Panel I/C for 33 KV single T/F, 3- CT 200/100/1-1A, 4- Steel Structure]

24 volt battery with charger

3x185 mm² XLPE 11 KV Cable

11 KV 3x185 mm² XLPE Cable Jointing Kit Indoor/Outdoor

ACSR Panther Conductor

11 KV Top Channel

11 KV Disc Insulator with disc fitting

33 KV Lighting Arrestor Connector suitable for panther

11 KV Dropper Angle

33 KV PPMC(400/1A)

33 KV Electronic TVM Meter

33 KV CT/PT Metering Pole Mounting Unit (400/1A)

Supply of following material/fitting complete in all respect-

HDPE Pipe 160 mm dia PN-6 PE-80 with elbow and socket for 33 KV cable

Main Bus Bar complete with structure

Terminal Gantry

Isolator Terminal connector for Panther conductor

Isolator Terminal connector for Dog conductor

Bus post insulator clamp for Panther

PG clamp for Panther to Panther

PG clamp for Panther to Dog

PG clamp for Dog to Dog

Control Cable 4X2.5 mm sq. (Armoured)

Control Cable 2X2.5 mm sq. (Armoured)

Earthing Mat

Lighting for switchyard (LED light)

6 inch dia G.I. pipe 3m long

4 inch dia G.I. pipe

Aluminium Lugs 3X300 Sq.mm.

Cable marker of RCC dimension (1200 mmX200mmX80mm)

C.T. Connector for Panther

Holding Clamps

Nut & Bolt

The excavation of 4 nos. foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of four Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle, cross bracing angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevant IS Specification.

The excavation of 2 nos. foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevant IS Specification.

Laying of HDPE Pipe 150 mm Diameter for laying of 33 KV 3x300 sq mm XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 150mm dia with elbow and socket for 33 KV cable will be supplied by contractor)

Laying and dressing of under ground 33 KV 3X300 sq mm XLPE Cable (Double Circuit 5467x2=10934 Mtr.) into HDPE Pipe by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Laying, stringing and hanging of 33 KV 3X300 sq mm XLPE Cable as per RESPO norms.

Laying of parallel 33 KV 3X185 Sq.mm. XLPE cable by digging of trench of size 800 mm wide 1250 mm deep and boxing with brick, sand, stone slab 600X450X50 mm, width between 33 KV cable 600 mm. (Other Necessary Materials excluding 33 KV XLPE Cable 3X185 mm² provided by Contractor). Work will be done as per provision of IS 1255:1983

Errection of 33 KV 3x300 mm² XLPE Cable Jointing Kit Indoor/Outdoor with complete work

Errection of 33 KV 3x185 mm² XLPE Cable Jointing Kit Indoor/Outdoor with complete work

Errection of 33 KV Straight Through with complete work

Hoisting of cable on double pole using G.I. Pipe 6"dia 3 mtr. Long with complete work (G.I. Pipe 6" dia and other Necessary Materials excluding 33 KV XLPE Cable 3X300 mm² provided by Contractor)

Hoisting of cable on double pole using G.I. Pipe 4"dia 3 mtr. Long with complete work (G.I. Pipe 4" dia and other Necessary Materials excluding 33 KV XLPE Cable 3X185 mm² provided by Contractor)

Installation, commissioning & Testing of 33 KV VCB with single T/F control panel and CT 200/100/1A with structure including making plinth and foundation of VCB. Complete all connection in all respect.

Installation, commissioning & Testing of Main Bus bar complete with structure including making plinth of structure. Complete all connection in all respect. and Replacement of old Bus bar 12 mtr & Stringing of New Bus bar 6 meter with Jumpering in bays

Installation, commissioning & Testing of 33 KV Line isolator with structure including making plinth of Line isolator. Complete all connection in all respect.

Installation, commissioning & Testing of 33 KV Post insulator with structure including making plinth. Complete all connection in all respect.

Installation, commissioning & Testing of 33 KV Bus Isolator with structure including making plinth. Complete all connection in all respect.

Fixing of control cable 4X2.5 sq.mm. (Armoured) for suitable to VCB with complete connection in all respect

Fixing of control cable 2X2.5 sq.mm. (Armoured) for suitable to VCB with complete connection in all respect

Fabrication and erection of Cable marker of RCC of dimension 1200 mmx200 mmx80 mm (Complete work)

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms.

Earthing of S/S Outdoor Equipment with MS Fla 50X10 mm as per IS Code 3043 - 1987 specification

Earthing of S/S Indoor Equipment as per IS Code 3043 - 1987 specification

Painting of Substation Structure

Errection of Lightening Arrestor

Installation of Terminal Gantry

Installation of Earth mat

Erection of 33 KV PPMC (400/1A) along with 2 Nos. CT/PT Pole Mounting Unit & 3 No. TVM Meter

Earthing of PPMC (100/1A)

Earthing of CT/PT Unit

M/s Anil kumar singh

M/S SHUKLA ENTERPRISES

Rishi Trading Co.

Ingenious Energy Infratech