Improvement to Wirwade Bk.toAwatade wasti road VR 140 Ch No 0/200 to 1/000 TalMohol Dist Solapur

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. SSR Pg No./It No. 26/2.11

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m including all lifts, laying in layers of 20cm to 30cm thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete (Material obtained from departmental Land) SSR Pg No./It No. 29/2.27

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate) SSR Pg No./It No. 33/3.19

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) SSR Pg No./It No. 32/3.20

Providing and constructing 50 mm thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm size chips compacting with static roller having weight 8 to 10 MT to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Pg No./It No. 31/ 3.37a

Open Graded Premix Surfacing - Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade-USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Pg No./It No. 33/4.12

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 Kg / Sqm by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Pg No./It No. 32/4.01

Supplying hard murum at the road site including conveying and stacking etc. complete. SSR Pg No./It No. 29/2.29a

Spreding hard murum on the road including sectioning etc. complete. SSR Pg No./It No. 30/2.30

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 18 gauge M.S. sheet with horizontal bracing of angle iron frame of size 25 x 25 x 5 mm including painting with one coat of zinc cromate stoving primer and two coats of oil painting including two angle iron post of size 50 x 50 x 5 mm of 2.40 m. long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 30 cm x 30 cm x 30 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade.