Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹18.4 L+₹1.4 L (8.28%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
PROVN OF WATER SAVING TAPS IN MD ACCN AT AF STN HALWARA AND ADDN/ALTN TO BLDG NO P-98 AT AF STN BARNALA UNDER GE (AF) HALWARA
2023_MES_582240_2
GE/HAL-75/2022-23
Open Tender
Civil Works
Item Rate
183 days
GE (AF) Halwara
MES ENLISTED CONTRACTORS CLASS E CATEGORY a i
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹40,000
Yes
26 Apr 2023
25 Mar 2023
20 Apr 2023
25 Mar 2023
18 Apr 2023
3 Apr 2023
Amount
PART-1 WORK AGAINST SL ITEM NO 1 TO 83 OF BOQ AT AF STN BARNALA Demolition of cement concrete in floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work built in cement concrete including all quoins, arches, pillers etc complete all as specified
M&L for brick work with sub class ‘B’ Bricks straight or curved on plan exc 6M mean radius and built in cement mortar 1:6 complete all as specified and directred.
M&L for brickwork with sub class 'B' Bricks, straight or curved on plan to any radius in half brick thick wall built in Cement Mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for 12mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.
M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces,mixed with water proofing compound @ 3% by weight of cement, finished surfaces fair and even without using extra cement complete all as specified.
M&L for 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty icomplete all asspecified and directed .
Preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smaoke soot, mould, moss and efflorescent salts trading oil and greasy spots; filling holes, crakes with wall care putty and applying one coat of distemper oil emulsion complete and cleaning the surface in all respects complete all as specified and directed.
All as per Sl item No 10 above but one coat of cement base paint
All as per Sl item No 10 above but one coat of white wash
All as per Sl item No 10 above but one coat of white wash on ceiling surfaces
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
Taking down of chowkat / frames with shutter (without taking off shutter from frames) n.exc 1.5 Sqm each including cutting PCC blocks to remove hold fasts complete alll as specified and directed.
All as per Sl item No 17 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Taking down shutters of any description exceeding 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.
S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including MS guard bars 10mm dia Square bar 125mm c/c and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately. (iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.
S&F steel ventilator with side hung shutter including hinges, steel peg stay complete all as specified and directed.
S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) complete all as specified and directed.
S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) complete all as specified and directed.
S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Part-I Section 8 clause 8.24(a), supplied and fixed to chowkats complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately
S&F 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides as in door shutters complete all as specified and directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F aluminium anodised cast type handle of 150mm size complete all as specified and directed..
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed..
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass any size, thickness from wooden or steel frames complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.
M&L for prepration of new steel surfaces over 10cm width and girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for prepration of new steel surfaces over 10cm width and girth and applying 2 coats of synthetic enamel paint complete all as specified and directed.
Preparation of old painted steel and iron based surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of new wooden surfaces over 10cm width and girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
S&F cold rolled mild steel medium weight butt hinges 100mm size complete all as specified and directed.
M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0(using 12.5mm graded stone aggregates) as in sub base to floor tiles etc finished fair and even complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in plinth protection/floor sub base etc. including use of necessary formwork where required complete all as secified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block (M-35 grade) rubber finish with grey cement and pigment of any shape and size confirming to IS 15658-2006 laid over and including 30mm thick sand cushioning complete as specifed and directed
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in sub base etc complete all as secified and directed.
Demolition of stone slabs and tiles of any description or thickness in floor apron etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site complete all as specified and directed.
M&L for granite 20mm thick (of any type ) work (table rubbed and polished) as in cooking plateform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust, making holes in RCC shelves & granite stone for gas pipe where required complete all as specified and directed.
Rounding edges of 18-20mm thick granite stone including machine polishing to edge to give high gloss finish etc complete all as specified and directed.
S&F 32mm dia, light grade GI pipe 450mm long as in spouts, pipe bevelled cut at both ends and fixed by making holes in parapet wall of roof, sunshade, chajjas etc above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with the adjacent surfaces complete all as specified and directed.
Taking down or up 15mm bore steel tubing and connections inculding cleaning for refixing or removal to store complete all as specified and directed.
All as per Sl item No 51 above but 20mm bore
S&F 15mm bore tube 'medium grade' galavanised, with all fitting and fixed to walls,ceiling or laid in floors etc complete all as specified and directed.
All as per Sl item No 53 above but 20mm bore
S&F 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in replacement rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) including dismantling of extisting tank of any shape and size with float valve complete all as specified and directed.
S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers including cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.
S&F cast iron floor trap 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.
S&F WHB in repairs vitreous white chinaware of 550x400mm size including CI/MS brackets, 45cm long 15mm dia PVC connection. PVC waste pipe , waste coupling of suitable size/length, 15 mm bore CP pillar tap, 15mm bore CP Angle cock and all connection complete all as specified and directed.
S&F in repairs Vitreous china ware water closet Orissa pattern 580mmx440mm size including 'P' or 'S' trap connecting to trap and to flushing pipe, anti syphonage pipe etc complete with foot rest including provision of lime concrete bedding and making good to floors etc complete all as specified.
S&F in repairs china ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC Chord and brass nozzle and fixed to pipe complete all as specified and directed.
S&F in repairs vitreious china urinal half stall, bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cmenet, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe and urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.
S&F in repairs syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc complete all as specified.
S&F 15mm dia PVC connection 450mm long with PTMT nuts complete all as specified and directed.
S&F in repairs CP brass towel rail 600mm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F in repairs PTMT grating 100mm dia complete all as specified and directed.
S&F in repairs 15mm bore chromium plated bib tap cast copper alloy, Fancy type with crutch or butter fly handle screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed
Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position complete all as specified and directed.
S&F spun pipe 100 mm bore cast iron soil, waste and vent pipes in any lenth with or without ears, with cement joints, fixed to walls complete all as specified and directed.
All as per Sl item No 72 above but 75mm bore
Demolition of cement concrete of any description not otherwise specifically provided for complete all as specified and directed.
M&L PCC(1:2:4) type B1(using 20mm graded stone aggregate) as in roof kerbs complete all as specified and directed.
Raking out joints/pointing to masonry or brick work/brick tiles as in roof, floor, chajjas etc complete all as specified and directed.
M&L for flush pointing to brick walls/brick tiles over roof in cement mortar 1:3 complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in stair case, lintels, RCC chajjas and sunshades etc and placing in position and set in cement mortar (1:4) complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in manhole cover / slabs and placing in position and set in cement mortar (1:4) complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
All as per Sl item No 81 above but 8mm dia
S&F in repairs 110 mm dia PVC (SWR) pipes any length and in any position in trenches, floors or at wall (with clamps in wall) complete all as specified and directed.
S&F PVC (SWR) bends 110mm dia
PART-II WORK AGAINST SL ITEM NO 84 TO 89 AT AF STN HALWARA Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15mm bore GI tubing medium grade galvanised with all fitttings etc fixed to walls or laid in floors etc complete all as specified and directed
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good, cutting exc 10cm but not exc 20cm girth in brick work complete all as specified and directed.
Dismantling existing 15mm bore brass chormium plated bib tap complete all as specified and directed.
S&F 15mm bore cast copper alloy aerated bib cock (foam flow) with butterfly crutch or butterfly handle, screwed down, screwed for iron pipr or for glass ferrule and fixed complete all as specified and directed.
All as per Sl item No 89 above but long body type
S K BANSAL AND CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .