Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.5 LRejected-Finance AT AMRI THANA MUFFASIL AMARI GAYA SOHAIPUR GAYA BIHAR 823003 | GAYA | BIHAR | 823003 | L1 | Rejected-Finance As per CE Lt 2485 dt 20.08.2023 Tended has been Cancelled | |
| 2 | L3₹88.6 L+₹10.1 L (12.8%)Rejected-Finance T33 HANUMANNAGAR TO BHUSHKOL VIA GYARI RAJWA GANAUNI CONSTRUCTION OF RCC BOX BRIDGE AT CH 5 560 KM IN HANUMAN NAGAR TO BHUSHKOL VIA GYARI ROAD | NEW DELHI | DELHI | 110001 | L3 | Rejected-Finance As per CE Lt 2485 dt 20.08.2023 Tended has been Cancelled | |
| 3 | L3₹90.3 L+₹11.8 L (15.0%)Rejected-Finance | L3 | Rejected-Finance As per CE Lt 2485 dt 20.08.2023 Tended has been Cancelled | |
| 4 | L4₹92.2 L+₹13.7 L (17.4%)Rejected-Finance 0 KANGRA KANGRA HIMACHAL PRADESH 176086 | KANGRA | HIMACHAL PRADESH | 176086 | L4 | Rejected-Finance As per CE Lt 2485 dt 20.08.2023 Tended has been Cancelled | |
| 5 | L5₹97.6 L+₹19.0 L (24.3%)Rejected-Finance | L5 | Rejected-Finance As per CE Lt 2485 dt 20.08.2023 Tended has been Cancelled |
Tender Value
₹93.6 L
EMD Value
₹1.9 L
Closing Date
22 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
O.O. Executive Engineer, RCD, Road Division, Sherghati
Construction RCC Box bridge at Chainage 1.580km at Fatehpur-Lutitand Road
2022_RCD_120936_2
RCD/SHER/RCPLWEA/04/Tender 2022-23
Open Tender
Civil - Roads and Bridges
Item Rate
120 days
Fatehpur Luttitand
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
₹1.9 L
RCPLWEA Cell, RCD, Mechanial works
11 Jan 2024
15 Sept 2022
24 Sept 2022
15 Sept 2022
22 Sept 2022
15 Sept 2022
19 Sept 2022
90 days
Amount
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. Bt Manual Means
Construction of embankment with material obtained from borrow pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.
Granular Sub-base with Well Graded Material (Table 400-1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth sheel roller to achieve the desired density, complete as per Techncial Specification clause 401. (Grading- I Materials)
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix (Pug Mill) carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared sub-base and compacting with smooth wheel roller of 80 ro 100 KN to achieve the desired density including lighting, barricading and maintenance of diversion etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.
Prime Coat Providing and applying primer coat with bitumen emulsion SS1 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per Technical Specification Clause 502.
Tack Coat Providing and applying tack coat with bitumen emulsion RS1 using emulsion pressure distributor at the rate of 0.225 kg per sqm on the prepared bituminous/ granular surface cleaned with hydraulic broom as per Technical Specification Clause 503.
Bituminous Macadam Grading- II Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.
Semi-Dense Bituminous Concrete Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5% of mix and filler, trasnporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignement, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No 508 complete in all respects. Grade II (92% bitumen & 8% waste plastic)
Providing and Fixing 'Logo' of PMGSY/ LWE Project Providing and fixing of retro-reflectorised typical PMGSY informatory sign board ,Direction Sign Board &Maintenance Sign Boardwith Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1Providing and fixing Logo of PMGSY Project
Providing and Fixing 'Logo' of PMGSY/ LWE Project Providing and fixing of retro-reflectorised typical PMGSY informatory sign board ,Direction Sign Board &Maintenance Sign Boardwith Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 Providing and fixing Logo of Citizen Information Board
Earthwork in Excavation for Structures Earthwork in excavation fas per drawing and technical specifiication clause 305.1 inlcuding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordianry Soil Uto 3 m depth
PCC M15 Providing and laying of M15 and laying of PCC M15 levelling course below bottom slab & retaining wall & curtain wall.
Backfilling behind abutment, wing wall and return wall complete as per drawings & Technical Specification Clause 1204.3.8 Sandy Material
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the enitre surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical speciifcation clause 1204.3.8
RCC M30 RCC grade M30 in sub-structure complete as per dwg & Technical Specification Upto 5 m height
RCC M30 RCC grade M30 in super-structure complete as per dwg & Technical Specification Upto 5 m height
Supplying, fitting and placing TMT bar reinforcement in substructure complete as per drawing and technical specification clauses 1002, 1005, 1010 & 1202
Supplying, fitting and placing TMT bar reinforcement in superstructure complete as per drawing and technical specification clauses 1002, 1010 & 1202
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (ii) Ordinary Kilometer Stone (Precast)
RCC M30 in wearing course (including reinforcement) Providing and laying Cement concrete wearing course M-30 grade including reinforcement complete as per drawing and Technical Specifications clause 800 and 1206.3
Construction of RCC railing of M25 grad in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm as per approved drawings and technical specifications clause 800, 900
Drainage Spouts complete as per drawing and technical specifications clause 1209
Reinforced Cement Concrete M30 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications clauses 800 & 1211.
Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification clause 1303. Rubble Stone laid in cement mortar 1:3
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment wighing less than 25 kg laid dry complete as per drawing and technical speciifcations clause 1301.
Providing and laying Boulder Pitching on slopes laid over prepared filter media as per drawing and Technical specifications Clause 1302
Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specification clause 1302
Routine Maintenance amount for 1st year
Routine Maintenance amount for 2nd year
Routine Maintenance amount for 3rd year
Routine Maintenance amount for 4th year
Routine Maintenance amount for 5th year
12% GST Amount (Construction and Maintenance)
MANISH KUMAR
MANISHA CONSTRUCTION
AJAY KUMAR
SHAHABAD ENGINEERS PVT LTD
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .