Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.9 Cr
EMD Value
₹29.8 L
Closing Date
6 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR DEN 1
28 conditions · 8 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Each page of the copy of documents/certificates in support of Special Financial Criteria, submitted by the tenderer, shall be self attested/ digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page).
Note Explanation for clause 10 including 10.2 contractor may refer Indian Railways Standard General Conditions of Contract- April- 2022 (GCC- April-2022).
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as per clause 10.5 of Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
Technical Eligibility Criteria:-1.1 The instant tender is a composite work comprising of two components namely Civil work and Track P-way work. The similar nature of work for Civil component is (1) Any Civil Work and that for track Pway-work, the similar nature is defined as (2) Any P.Way work - like CTR, TSR, TRR, TTR, TWR, TFR and Deep screening, lifting of track, shallow screening, pre and post BCM work, De-stressing and P.Way linking works. ___________________________________________________________________ The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited.(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. ___________________________________________________________________ Note for (1.1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. The tenderer has to qualify in both components. Disqualification in any one of the components will lead to summarily rejection of the offer. ___________________________________________________________________ 1.2.The value of Cost Component for Any Civil Work Rs.13,78,82,908/- & the value of component for Any P.Way work like CTR, TSR, TRR, TTR, TWR, TFR and Deep screening, lifting of track, shallow screening, pre and post BCM work, De-stressing and P.Way linking works is Rs.1,08,87,494/-.
1.3. To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract, April 2022 with updated correction or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows:-The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Substantially Completed Work :- Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.Note for item 1.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Cont...
1.4. If the firm participated as "JV", then as per GCC-2022 and as per latest correction slip, tender will be decided as follows: __________________________________________________________________ For Lead Member: The technical eligibility for Civil Component (i.e. Major Component) of work as per para 10.1 of GCC-2022, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV' and technical eligibility for other component(s) of work as per para 10.1 of GCC-2022, shall be satisfied by either the 'JV in its own name & style' or 'any member of the JV'. 1.1.1 _____________________________________________________________ For Non Lead Member : Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for any component of the work as per para 10.1 of GCC-2022, shall have technical capacity of minimum 10% of the cost of any component of work mentioned in technical eligibility criteria. i.e., each other (non-lead)member of must have satisfactorily completed or substantially completed during the last 07(seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of cost of any component of work mentioned in technical eligibility criteria.
Definition of similar Work : In reference to technical eligibility criteria as defined above, (1) The similar nature for Civil work component costing Rs.13,78,82,908/- is Any Civil Work(2) Similar nature for Track P-way 1.1.2 work component costing Rs.1,08,87,494/ is Any P.Way Work like- CTR, TSR, TRR, TTR, TWR, TFR and Deep screening, lifting of track, shallow screening, pre and post BCM work, De-stressing and P.Way linking works.
The tenderer in support of his/their claim of qualifying the laid down "Technical Eligibility Criteria" must submit Experience Certificate as per format prescribed in Annexure "W" duly self attested/digitally signed on each page (Self Attestation shall include signature, date & stamp of the tenderer.
Each page of the copy of the documents/ certificates in support of Special Technical Criteria, submitted by the tenderer, shall be duly self attested/digitally signed by the tenderer (Self Attestation shall include signature, date & stamp of the tenderer).
Tenderer has to submit details of Employment/partnership etc of Retired Railway Employees as per Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) with all correction slips up- todate and as given in para 24.1 of "General instructions to tenderer" attached with tender document. Tender without the information above referred to or a statement to the effect that no such retired engineer or retired Gazetted Officer is so associated with the tenderer, as the case may be, shall b e rejected. Format given in Annexure-J in attached documents.
Note Explanation for clause Technical eligibility criteria, contractor may refer Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as per clause 10.5 of Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
As per Rly Bd's letter No.2017/Trans/01/Policy, dt.08.02.2018 Multiple L1:- In case of more than one L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and the current financial year up to the date of opening of tender may be selected for award.
Bid Capacity will be applicable, vide GCC Correction slip No.11 :If firm has participated as Joint Venture, then each member of the JV firm is required to submit bid capacity. In case of non-submission of bid capacity by any member of JV, bid capacity of that member will be considered as "Nil" and no further correspondence or documents will be accepted after opening of tender.
Bid Capacity : For tenders having advertised value more than Rs.10Crore (As per ACS-11 of GCC-2022) wherein eligibility criteria includesbid capacity also, the tenderer will be qualified only if its available bidcapacity is equal to or more than the total value of the present tender.The available bid capacity shall be calculated as under:- Available BidCapacity = [A x N x 2] (-)0.33 x N x B Where- A = Maximum value ofconstruction works executed and payment received in any one of theprevious three financial years or the current financial year (up to date ofinviting tender), taking into account the completed as well as works inprogress. N = Number of years prescribed for completion of work forwhich bids has been invited. B = Existing commitments and balanceamount of ongoing works with tenderer as per the prescribed proformaof Railway for statement of all works in progress and also the workswhich are awarded to tenderer but yet not started upto the date ofinviting of tender. NOTE:- (a)The Tenderer (s) shall furnish the details of:(i)Maximum value of construction works executed and payment receivedin any one of the previous three financial years or the current financialyear (up to date of inviting tender) for calculating A and. (ii)Existingcommitments and balance amount of ongoing works with tenderer as perthe prescribed proforma of Railway for statement of all works in progressand also the works which are awarded to tenderer but yet not started upto the date of inviting of tender for calculating B. In case of no works inhand, a 'NIL' statement should be furnished. The submitted details for (i)and (ii) above should be duly verified by Chartered Accountant. (b)Incase if a bidder is JV, the tenderer (s) must furnish the details of(i)Maximum value of construction works executed and payment receivedin any one of the previous three financial years or the current financialyear (up to date of inviting tender) by each member of JV for calculating'A', and (ii)Existing commitment and balance amount of ongoing workwith each member of JV either in individual capacity or as a member ofother JV as per the prescribed proforma of Railway for statement of allworks in progress and also the works which are awarded to each memberof JV either in individual capacity or as a member of other JV but yet notstarted up to the date of inviting of tender for calculating 'B'. In case ofno works in hand a 'NIL' statement should be furnished. The submitteddetails for (i) and (ii) above should be duly verified by CharteredAccountant. (c)Value of a completed work/work in progress/workawarded but yet not started for Member in an earlier JV shall be reckonedonly to the extent of the concerned member's share in that JV for thepurpose of satisfying his / her compliance to the above mentioned bidcapacity in the tender under consideration. (d)The arithmetic sum ofindividual "bid capacity" of all the members shall be taken as JV's "bidcapacity". (e)In case, the tenderer/s failed to submit the above statementalong with offer, their/ his offer shall be considered as incomplete andwill be Rejected Summarily. cntd..... ( Click here to download Format)
.... (f)The available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria /tender requirement. TENDERER'S CREDENTIALS (BID CAPACITY) should be read in conjunction of Indian Railways Standard General Condition of Contract published in April-2022 up to latest correction slip.
2 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/ We have visited the works site and I / We am / are aware of the site conditions.
Composite Works (Civil and P.Way) in connection with Conversion of washable apron in normal ballasted track of line No.1, 3, 5 & 6 of Raipur Station.
E-R-T-103-26-27~SECR
E-R-T-103-26-27
Open
Works - General
12 Months
Raipur, Chhattisgarh
₹0
₹29.8 L
12 Oct 2026
12 Oct 2026
23 Oct 2026
83 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ 86745050.11 Below/P | ||
| — | Breakup | for details. | — | ||
| Execution of all works connected with above work covered under SEC Railway DSR- CPWD-2023 and it's specification. | — | — | — | 8,67,45,050.11 | |
| — | — | — | Above/ 10617483.02 Below/P | ||
| — | 10.00 | — | — | ||
| Supplying fabricating and erecting welded and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in-charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. | — | — | — | 11,55,412.1 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annex-JRevised.pdf
ATTACHMENT
GCCACS12.pdf
ATTACHMENT
form103.pdf
ATTACHMENT
SplCivil.pdf
ATTACHMENT
Annexure-W.pdf
ATTACHMENT
CE16Revised2023.pdf
ATTACHMENT
BidCapacity.pdf
ATTACHMENT
JVFormat.pdf
ATTACHMENT
TMTBarspecification.pdf
ATTACHMENT
Specialconditionsfortrack-14.pdf Special condition for Track
ATTACHMENT
RevisedPCECircular31_11zon.pdf CE Circular 31
ATTACHMENT
GCC-2022withACS1-10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Specialconditionsfortrack-14.pdf
ATTACHMENT
RevisedPCECircular31_11zon.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .