Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.5 LAccepted-AOC VILL DRABAD PO MANJEER TEHSIL SALOONI DISTT CHAMBA H P 176312 | CHAMBA | HIMACHAL PRADESH | 176312 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹17.1 L+₹1.6 L (10.4%)Rejected-AOC | L-2 | Rejected-AOC Being L-2 | |
| 3 | L-3₹17.2 L+₹1.7 L (11.1%)Rejected-AOC | L-3 | Rejected-AOC Being L-3 | |
| 4 | L-4₹17.9 L+₹2.4 L (15.7%)Rejected-AOC AKASH KUNJ KANULAL ROAD MITHAPUR PATNA BIHAR 800001 | PATNA | BIHAR | 800001 | L-4 | Rejected-AOC Being L-4 | |
| 5 | L-5₹18.3 L+₹2.8 L (18.4%)Rejected-AOC | L-5 | Rejected-AOC Being L-5 |
Tender Value
₹28.8 L
EMD Value
₹57,651
Closing Date
23 Jul 2024, 12:00 pmClosed
COMMANDANT (ENGR)
CONTRACT CELL CZ HQR KOLKATA PIN 700106
Repair maintenance and painting of T III 28 nos Qtrs of block Koshal Vihar
2024_CRPF_816471_1
B.V(GC MKG)/2024-25-CZ-C/CELL (TE-33)
Open Tender
Civil Works - Buildings
Works
90 days
GC CRPF Mokamaghat Distt Patna Bihar
Please refer Tender documents.
16 documents required · 16 mandatory
₹0
₹57,651
23 Sept 2024
13 Jul 2024
24 Jul 2024
13 Jul 2024
23 Jul 2024
13 Jul 2024
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
1:5:10 (1 cement : 5 coarse sand (zone-llIl) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coat )
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm
Renewal of old putty of glass panes (length)
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 100 mm diameter pipe
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
HABRICK COMPANY
ANURADHA ENTERPRISES
SAURAV KUMAR
RAJ LAXMI SALES AGENCY
NIVYA CONSTRUCTION
YOGESH KUMAR AND CO
pardeep kumar contractor and builders
MOHD. SHAHNAWAZ
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .