ADDITION ALTERATION AND SPECIAL REPAIRS OF MD ACCN AT KIRKEE UNDER GE C KIRKEE

Amount

M&L for sunken flooring as per following details complete all as specified and directed (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM .(b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc.(c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent as given in Appx 'C'.) (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.(f) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing coating "Dr FixitPidifin 2K" or equivalent as given in Appx 'C' can be furthr applied right upto 2.10 mm to water proof the shower area also, it is a bathroom or bath cubicles of a sanitary annes and apply second coat after 6-8 hours and allow to dry completely. (g) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M-15 type B0 mixed with intergral WPC (Liquid) laid to be slope 1:60 towards outer face of wall. Provide 40mm OD UPVC pipe at the lowest point with 300mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2 etc complete all as per manufacturers instruction and direction.

Fixing of UPVC 40 mm dia for spout pipe in sunken floor complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing upto a distance of 5Km to 7.5Km complete all as specified and directed.

Demolition of cement concrete of any description and in any positon not other specifically provided for complete all as specified and directed

M&L for 25 mm thick Cement concrete as a level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and directed.

M & L for coloured Non skid ceramic tiles 400mm x 400mm and standard thickness as provided by the manufactures, in floors set and jointed in neat cement slurry and pointed in white / colour cement to match the shade with and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 600mm x 600mm and standard thickness as provided by the manufactures,in floors set andjointed in neat cement slurry and pointed in white /colour cement to matchthe shadewith and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for Glazed ceramic coloured tiles 450x300mm and standard thickness as provided by the manufactures in Dado/Skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10 mm thick backing coat in CM (1:4). complete all as specified and directed.

M&L for Vitrified Ceramic tiles 600x600mm and standard thickness as provided by the manufactures, (square/rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 600x600mm and standard thickness as provided by the manufactures, (square/rectangular) polished, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for Glazed ceramic colour tiles in vertifical surface 600x300mm and standard thickness as provided by the manufacturers with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering backcoating in cement mortar 1:4 complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removing to a distance of 5KM to 7.5KM, complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed bed in CM (1:6) and including three cuts on each steps and including dismantling stone slabs and tiles of any description or thickness in floors, aprons etc and removing to a distance of 5KM to 7.5KM, complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceiling etc. including raking out joints, hacking for key, scrubbing down with water complete including removing the material to a distance of 5KM to 7.5KM all as specified and directed.

M & L for 10mm thick plastering in CM 1:6 for internal wall of buildings finished even and smooth with and including 'sagol' finish 1 mm thick, complete all as specified and directed.

M & L for 10+5 mm thick plastering in two layers in CM 1:4 thick for external wall of buildings finished even and smooth with using integral water proofing compound, complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:3 on fair faces of concrete surface as in ceiling complete all as specified and directed.

M & L for preparing of new plastered surfaces of wall and applying two coats of distemper oil emulsion (OBD) over of coat of primer over 3mm thick putty of make as given in Appx 'C' complete all as specified and directed.

M & L for for applying two coats of cement based paint on old / new plastetred surfaces of wall including preparation of srufaces complete all as specified and directed.

M & L for Preparing newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

S & F for stainless steel plate rack made out of 1 mm thick sheet over all size 900 x 600 x 250 mm fixed with screws of proper size complete all as specified and directed.

S&F in repairs for sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, Make :- as given in Appx 'C' complete all as specified and directed.

S&F in repairs Wash basins, Vitreous China (flat back or angle back type) ,with pedestal of size 630 x 450 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china WHB, size 550 mm X 400 mm make:- Parryware (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand etc but excluding fixing of supply and waste pipe complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed with 15 mm bore pipe complete all as specified and directed.

Supply and fix for rotational moulded LLDPE water storage tanks 500 ltrs capacity (as per IS:12701), tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking down existing unserviceable overhead tank of any capacity complete all as specified and directed.

Supply and Fixed in repairs for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (IWC)(excluding flushing cistern and flush pipe) including connection to down or out going pipe and to flushing pipe anti syphonage pipe etc of approved quality complete all as specified and directed.

Supply and fix in repairs for dual flow 5-7 ltrs capacity PVC/HDPE low level flushing cistern, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia of makes as given in Appx 'C' complete all as specified and directed.

Supply and fixing for UPVC 'P’ trap 110 mm dia bore complete all as specified and directed.

S & F of 110 mm UPVC WC connector with lip ring complete all as specified and directed

Supply and fixing of UPVC bends any radius 110 mm bore with access door complete all as specified and directed.

Supply & Fix in repairs UPVC pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls of laid in trenches with arrangement complete all as specified and directed

Supply & Fix UPVC vent cowl 110 mm bore complete all as specified and directed

Supply and fix UPVC branch piece, single (single Y) equal or unequal 110 mm bore with access door complete all as specified and directed

Supply and fix UPVC junction single, (Single `T') equal or unequal of 110 mm bore complete all as specified and directed

S & F UPVC branch pieces, double (double `Y') equal or unequal of pipe 110 mm bore complete all as specified and directed

S & F UPVC bends (any radius), diminishing pieces or tapers, bore of pipe 110 mm complete all as specified and directed

S & F in repairs for UPVC pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls with arrangement complete all as specified and directed

S & F UPVC bends any radius 75 mm bore with access door complete all as specified and directed

Supply and fix UPVC bends (any radius), diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed

Supply and fix UPVC branch pieces, double (double `Y') equal or unequal of pipe 75 mm bore complete all as specified and directed

Supply and Fix UPVC junction single, (Single `T') equal or unequal of 75 mm bore complete all as specified and directed

Supply and Fix Cast Iron floor trap, with grating 75 mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) in repairs and including water leak proof treatment complete all as specified and directed

Supply and fix for stop valve, cast copper alloy, fency type, chromium plated, screwed down, high pressure, with capstan head handle , screwed both ends for iron pipe or for unions, with long shank and cup (concealed type) , bore dia 15 mm complete all as specified and directed

Supply and fix in repairs shower rose size 125 mm chromium plated with or without swivel joints, including fixing to 15 mm dia steel pipe or union complete all as specified and directed

Supply and fix PVC connection 15 mm dia with CP nuts of length 600 mm long complete all as specified and directed

Supply and fix in repairs bib taps, CP brass, fancy type with crutch or butterfly handle screwed for iron pipe for brass ferrule 15mm dia complete all as specified and directed

Supply and fix 25 mm size gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Supply and fix in repairs elegent mirror PVC Cabinet of size 475x600x150mm all as specified (Make- as given in Appx 'C") complete all as specified and directed

Supply and fix for aluminium anodized three track sliding window with two or more shutter with 4mm thick plane glass, one shutter of stainless steel mosquito proofing stainless steel wire cloth of 0.36 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Refer TD Drawing No CEPZ/2002/TD/03 dated 31.07.02 and amended 11.09.04.

Supply and fix aluminium anodised louvered ventilator with 4mm thick pin headed glass and 100mm wide glass strips, white framed and fixed with aluminium anodised frames etc stainless steel wire cloth of 0.36 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and directed. Refer TD Drawing No CEPZ/2002/TD/03 dated 31.07.02 and amended 11.09.04.

Supply and fix as in repair, framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Removing of old water proofing treatment and cleaning the surface of slab and clearing with wire brushes, removing dust, foreign material, rubbish off the site to a distance n.exc. 100m complete all as specified and directed

M&L for 10 mm thick rendering in cement mortar 1:3 on RCC roof slabs mixed with water proofing compound @ 3% mixed with by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

Supply and fix for water proofing treatment over RCC slab by applying oil based bituminous primer on surfaces (rate of application of primer shall be as per Manufacture's instructions but shall not be less than 0.30 ltrs/sqm) and laying 3mm thick APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.60 kg/ sqm, reinforced with non-woven polyster reinforced (weighing not less than 160 gms/sqm), matt black finished and torch application on membrane surface including 24 hrs ponding test complete all as specified and as directed by the Engr-in Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed

Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed

Taking down Chowkats or frames with shutters without taking of shutters from the frames n. exc 1.5 Sqm each complete all as specified and directed

Taking down shutters of any description. exc. 1 sqm but n.exc. 2 sqm each complete all as specified and directed

S&F of second class Hard Wood ("Sal), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

Supply and fix 100mm butt hinges, medium weight, cold rolled mild steel, IS Marked, fixed to angle iron chowkats including welding complete all as specified and directed

Supply and fix aluminium handles 150 mm cast type anodised complete all as specified and directed

S&F for aluminium anodised barrel tower bolt 200mm long complete all as specified and directed .

S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and directed .

M & L for 75mm thick PCC type C2 1:3:6( using 40mm graded aggregate) as in plinth protection complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly/old steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and directed .

M&L for Roughening surfaces of old concrete surfaces horizontal or vertical by hacking, picking, sweeping clean and washing down with water to remove dust complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick (old size) work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc complete all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed .

S & F Pressed steel door frame of size 105 x 60mm and 1.25mm thick single rebated for doors incl necessary fixing lugs, hinges lock strike plate, etc with and including PCC 1:2:4 filled in hollow portion of frame complete all as specified and directed.

S & F Pressed steel door frame of size 125 x 60mm and 1.25mm thickness for doors with double rebate incl necessary fixing lugs, hinges lock strike plate, etc with and including PCC 1:2:4 filled in hollow portion of frame complete all as specified and directed .

S&F flush shutters, 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 5mm thick lipping complete all as specified and directed .

S & F 35 mm thick IInd class HW glazed and skelton shutter, open rabated and prepared to receive glass, gauze, etc (without such bars), edges of raming plain, chamfered or rounded, fitted with cut and mitred beads for scuring glass, etc size of shutters as specified in SSR-I, Section 8.24(a) supplied and fitted to chowkats complete all as specified and directed .

S & F Factory Made Solid PVC Moulded Door Shutter with flush door core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed .

S & F Factory made internal PVC moulded foor frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long complete all as specified and directed .

S&F 125 mm size MS butt hinges medium weight cold rolled complete all as specified and directed .

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed .

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed

S&F 300 mm, MS ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed .

S&F 25 mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer in charge.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed .

S&F hasp and staple, safety type, mild steel, wire type, stove enamell black, hinge pin including bolt to hinge plate and fixed with screws. Size of hasp and staple 75mm complete all as specified and directed.

Material and labour for excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil complete all as specified and directed.

Material and labour for demolition and breaking up drain pipes ( salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 100mm complete all as specified and directed.

Material and labour for demolition and breaking up drain pipes ( salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 150mm complete all as specified and directed.

Material and labour for demolition and breaking up drain pipes ( salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 200mm complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 100 mm bore including forming cradles complete all as specified and directed .

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 150 mm bore including forming cradles complete all as specified and directed .

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 200 mm bore including forming cradles complete all as specified and directed .

Material and labour for reinforced concrete pipes, 100 mm bore, Class NP-2, laid and jointed complete with collarscomplete all as specified and directed .

Material and labour for reinforced concrete pipes, 150 mm bore, Class NP-2, laid and jointed complete with collarscomplete all as specified and directed .

Material and labour for reinforced concrete pipes, 200 mm bore, Class NP-2, laid and jointed complete with collarscomplete all as specified and directed .

M&L for dubbing out average 10mm thick on irregular face of stone walls in CM 1 :6 complete all as specified and directed .

S&F in repairs for Towel Rail 600mm long of PTMT fixed with Towel Rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed .

S&F in repair CP health faucet for EWC/IWC and including two way CP bib tap 15mm dia complete all as specified and directed .

S&F for 15mm GI tubing medium grade, with all fittings fixed to walls and ceiling or laid in floors incl cutting through walls, floors etc incl taking down the same in repairs complete all as specified and directed .

S&F for 20mm GI tubing medium grade, with all fittings fixed to walls and ceiling or laid in floors incl cutting through walls, floors etc incl taking down the same in repairs complete all as specified and directed .

S&F Tooth brush holder/ tumbler brass CP for putting bathroom utilies (make- CERA Cat Part No CA 104 or equvalent of MARK, JAQUAR) fixed in repairs complete all as specified and directed .

S&F Soap dish brass CP Make- CERA Cat part no CA 103 or equvalent of MARK, JAQUAR, fixed in repairs complete all as specified and directed .

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed .

S&F fancy type Brass CP bracket suitable for curtain rod fixed in repairs complete all as specified and directed .

S&F 20mm dia CP Drapery Fancy type curtain rod fixed in repairs complete all as specified and directed .

S&F MS Holdfast, hook and pintol hinges and similar small articles confirming to Fe-290 Gde E-165 including necessary welding etc and fixed in position complete all as specified and directed .

S&F floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring, with overall length of cover plate 140mm complete all as specified and directed .

S&F 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl bedding layer in cement mortar 1:4, 20mm thick and pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) complete all as specified and directed .

S&F mild steel pressed handle, oval type, stove enameled black of size 150mm, fixed with screws or welded complete all as specified and directed .

S&F mild steel pressed handle, oval type, stove enameled black of size 150mm, fixed with screws or welded complete all as specified and directed .

S&F aluminium anodised handle, oval type, stove enameled black of size, 150mm fixed with screws or welded complete all as specified and directed .

S&F in repairs stop cock CP brass fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for ironpipe 15mm dia complete all as specified and directed .

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed to drain pipe 150mm bore incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed .

M & L for returning filling in incl spreading, levelling watering and well ramming in layers n.exc 25 cm thick (soil) complete all as specified and directed .

M & L for removing excavated material to a distnace n.exc 50mtr and deposited where directed at a level n.exc 1.50 mtr above starting point complete all as specified and directed .

M & L for demolition of RCC manholes covers including RCC slab set in cement mortar complete all as specified and directed .

M&L for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in manhole covers, septic tank slab etc set in CM 1:6 complete all as specified and directed .

M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for mild steel TMT bars, 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

S&F in repairs cast iron (sand cast) soil, waste and vent pipes in any length with cement joints, laid in trenches or in floors or fixed to walls, bore of pipe 100 mm complete all as specified and directed .

S&F in repairs cast iron (sand cast) soil, waste and vent pipes in any length with cement joints, laid in trenches or in floors or fixed to walls, bore of pipe 75mm complete all as specified and directed .

S&F in repairs cast iron bends (any radius) or diminishing pieces larger bore measured bore of pipe in 100mm fixed fitted with oval access doors complete all as specified and directed .

S&F in repairs cast iron bends (any radius) or diminishing pieces larger bore measured bore of pipe in 75mm fixed fitted with oval access doors complete all as specified and directed .

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed .

M & L for surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil. complete all as specified and directed .

M&L for hard core broken trap stone or boulders of gauge exc 63mm but n.exc 100mm,deposited spread and levelled in layers n.exc 15cm thick watered and rolled/rammed to true surface complete all as specified and directed .

M & L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in subbase over rammed earth complete all as specified and directed .

S & F of CP jet spray / hand spray fitting to EWC or wall with screws and including two way CP stop cock 15mm dia complete all as specified and directed .

M&L for one coat of synthetic enamel paint on old steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and directed .

S&F in Repair wall mixture three in one with complete accessories (Make - Hindware, CERA) complete all as specified and directed .

S&F in Repair Toilet paper holder of fixed to walls with chromium plated (CP) brass screws complete all as specified and directed .

S&F for towel ring of CP fixed with and incl CP brass screws and wooden / plastic cleats (min wt 90 gms) for kitchen complete all as specified and directed .

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed .

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed .

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed .

S&F in repairs for 75mm dia bore of pipe Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed .

S&F in repairs for 100mm dia bore of pipe Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed .

M&L for taking down carefully point wiring light , fan socket or power point socket complete, including fixture and fitting such as switches, ceiling roses pendents regulators, sockets, light fittings etc, removing meterials to store for keepng in safe custody or for taking credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc complete all as specified and directed .

Taking down carefully submain wiring three phase 6 wire of size 10 sq mm complete all as specified and directed .

Taking down carefully submain wiring single phase 3 wire of size 6 sq mm complete all as specified and directed .

Taking down DB including MCCB/MCB any type any size complete all as specified and directed .

Taking down KWH meter (Energy meter) convensional type single phase / 3 phase and depositting to store complete all as specified and directed .

Taking down Earthing materials complete all as specified and directed .

Taking down ceiling fan any size /sweep carefully and re fixing at site,painting of ceiling fans complete by spraying including filling cavities with filler,one coat after cleaning all dust etc. complete all as specified and directed .

Taking down Exhaust fan any size /sweep carefully and re fixing at site,painting of exhaust fans complete by spraying including filling cavities with filler,one coat after cleaning all dust etc complete all as specified and directed .

Taking down Storage water heater (Geyser) 50 ltr carefully and depositting to store complete all as specified and directed .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc. complete all as specified and directed .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket etc. complete all as specified and directed .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches complete all as specified and directed .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket complete all as specified and directed .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.00 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.00 sqmm as earth lead and connected to earth dolly for one 20 amps socket plug top and MCB (A/C ) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket all as specified and directed

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.50 sqmm (Nominal area) drawn in and including PVC casing & caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.50 sqmm as earth lead and connected to earth dolly for one two way light point controlled by two, two way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket complete all as specified and directed .

M & L for surface sub main wiring with four single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith two single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly complete all as specified and directed .

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly complete all as specified and directed .

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly complete all as specified and directed .

S&F 5 Amp switch piano type single pole one way complete all as specified and directed .

S&F 5 Amp switch piano type two way complete all as specified and directed .

S&F bell push piano type one way 240 volt complete all as specified and directed .

S&F socket flush type 6 amps, 5 pin, 230v complete all as specified and directed .

S&F switch flush type 15 amps, 230v complete all as specified and directed .

S&F socket multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps complete all as specified and directed .

S&F bracket light fitting including 1 x 15 Watt LED lamp, complete all as specified and directed of model CITY 1 Cat No LHDL02160099 of Havells or equivalent in make as per Appx 'C' .

S&F bracket light fitting including fixing 1 x 15 Watt LED lamp, complete all as specified and directed of model APPLE Cat No LHFOFTE1TZ1W012 of Havells or equivalent in make as per Appx 'C' .

S&F ceiling rose surface Bakelite three terminal complete all as specified and directed .

S&F bell electric AC 240 volt, 50 HZ complete all as specified and directed .

S&F bell multi music type complete all as specified and directed .

S&F Buzzer,ding dong AC 230 volts single pole complete all as specified and directed .

Taking down regulator, sealing cable ends and keeping aside for re use or removing to store complete all as specified and directed

Fixing only fan regulator (servicable regulators to be used from retrived items) complete all as specified and directed .

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz complete all as specified and directed .

S&F MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 6 way complete all as specified and directed. Note : MCB DB shall be prewired.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way complete all as specified and directed . Note : MCB DB shall be prewired.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way complete all as specified and directed . Note : MCB DB shall be prewired.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 4 way complete all as specified and directed . Note : MCB DB shall be prewired.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed .

S&F MCB, TPN, 63 Amps, 415 Volts complete all as specified and directed .

S&F MCB, TPN, 40 Amps, 415 Volts complete all as specified and directed .

S&F MCB, Single Pole and neutral 40 Amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and directed .

S&F MCB, Single Pole and neutral 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and directed .

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and directed .

S&F LED tube light fitting with LED tube 24 watt, 230 Volts,LED Batten inextruded aluminium housing with diffuser complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting PVC box 2 nos complete all as specified and directed. Cat No LCCLB 24-CDL of Crompton or equivalent in make specified in Appx 'C'.

S & F LED tube light fitting with LED tube 09 watt, CDL, 230 Volts , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting PVC box 2 nos complete all as specified and directed .

S&F LED Tube light fitting, 18 watt, CDL, 230 Volts, complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting PVC box 2 nos complete all as specified and directed .

S & F LED security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI bracket of Appropriate size and fixed to wall with 2 nos MS clamp and fastners complete all as specified and directed .

S & F ceiling fan 1200mm copper wound heavy duty complete including three blade, prewired etc 4 star rating with BLDC motor 28watt including provision of PVC insulated flexible copper conductor of size 0.5Sqmm from ceiling rose to connector complete all as specified and directed. Note: The quoted rate of the item includes for provision/fastening of hook of size 10mm dia for fixing of fan.

S & F exhaust fan 225mm sweep along with louver, metalic body and blade, energy efficient including provision of PVC insulated flexible copper conductor of size 0.5Sqmm from ceiling rose to connector complete all as specified and directed. .

S & F Cutting hole in stone/brick wall to the required shape to fix Exhaust fan 225 mm sweep and making good the disturbed surface matching with sorroundings complete all as specified and directed .

S & F water heater vertical storage type including temperature monitoring knob from outside body electrically operated, 25 Ltr capacity, BEE 5 star rated complete all as specified and directed .

S & F Single phase KWH meter 5-30 Amps with LCD display with back light with optical port, temper proof + box complete all as specified and directed .

S & F Three phase KWH meter 10-40 Amps with LCD display with back light with optical port, temper proof + box complete all as specified and directed .

Taking down defective service cable of 35 sq mm 3.5 core complete all as specified and directed .

Taking down defective service cable of 25 sq mm 4 core complete all as specified and directed .

Taking down defective service cable of 16 sq mm 2 core complete all as specified and directed .

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 3.5 core 35 sq mm complete all as specified and directed .

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 4core 25 sq mm complete all as specified and directed .

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 2 core 16 sq mm complete all as specified and directed .

M & L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil complete all as specified and directed .

M & L for returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed .

M & L for removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed .

M&L for fine dry river sand for cushioning of UG cable/ at cable trenches inside substation bulding complete all as specified and directed .

M&L for brick protection with sub class 'B' brick for UG cable laid in trenches complete all as specified and directed .

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I,

including testing to achieve earth resistance value as per IS specification on completion complete all as specified and directed. Note: The cost of GI wire 4mm dia required to connect the earth pit to main DB deemed to be included in the quoted rate.

Veekay Enterprises

L.K.R.TIWARI CONSTRUCTION

United Sales Corporation

shah construction

SHAH BUILDERS

KHANDELWAL ASSOCIATES

nhsaluji and associates