REPAIR TO LEAKAGE/SEEPAGE IN ROOF CHAJJA BALCONIES PLUMBING AND CERTAIN B/R WORKS IN OMQ AND 10 AFH AND CONV OF OLD UNSV LIGHT FITTINGS WITH ENERGY EFFICIENT LED FITTING AND ALLIED ITEMS AT TECHNICAL AREA AT AF STN HASIMARA UNDER GE (AF) HASIMARA

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 & n.exc 2 Sqm each, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Resecuring or easing & adjusting without taking down of shutter of any description exc 1 & n.exc 2 Sqm each, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches,pillars etc, complete all as specified and directed.

Dismantling structural steel work including doors, gates, but excluding framed truss etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilated demolition) for complete all as specified and directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM(1:6), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM (1:4) as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar (1:4), mixed with integral water proofing compound in top layer as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item)

M&L 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in ceiling surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

Cleaning the surfaces of plaster using wire brush, brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (pidifine 2K) @ 0.50 kg/sqm, complete all as specified and directed.

Supply only liquid water proofing compound of approved make, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:3) using water proofing compound @ 3% by weight of cement in sunken portion, complete all as specified and directed. (WPC shall be measured and paid seperately)

M&L PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in filling for sunken portion, complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in flooring for sunken portion surface finished even and smooth with using extra cement, complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces,guided rail etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W Gde E-250 quality A, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of 150mm long, complete all as specified and directed.

S&F aluminium handle 125mm long cast type anodised ('D' shaped), complete all as specified and directed.

S&F 75mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed.

S&F for powder coated anodised aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F powder coated anodised aluminium window / ventilator shutters, side/top hung, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 of 100mm long (2 No.), suitable Al handle (1No.), complete all as specified and directed.

S&F power coated aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc, complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks incl wooden beads, complete all as specified and directed.

S&F sheet glass, ordinary quality, 4.8mm thick in squares n exc 0.5 Sqm each pane and providing solar control film 25 micron reflective type (gareware sun control or equivalent), complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster as in backing of tiles in CM(1:4), complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor surfaces finished even and fair, complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs, mud stops or chamfered on edges, complete all as specified and directed.

S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified incl necessary dismantaling CGI sheets as in roof covering, complete all as specified and directed.

S&F of pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified incl necessary dismantling CGI sheets as in roof covering, complete all as specified and directed.

M&L fiber glass reinforced translucent corrugated sheet roof covering 2 mm thick fixed with J or L hook including necessary demolition/dismantaling of existing sheets as in roof covering, complete all as specified and directed.

Mild steel plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W and gde-E-250 as in gusset plate, complete all as specified and directed.

M&L rolled section as in framing for clading, glazing and the like fixed with angle cleats and connecting plates etc coforming to Fe-410-W(Gde E-250, complete all as specified and directed.

M&L MS screw bolt diameter of shank 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends each screw end fitted with washers and one hexagonal nut, n.exe 05cm, complete all as specified and directed.

S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer paint including preparation of surface, complete all as specified and directed.

S&F of 4mm thick pre painted E fibre board designer/decorative fixed or laid/ inserted to anodised aluminium snap grid frame size 605x605 mm work for false ceiling hangers with 6mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed including necessary demolition/dismantaling of existing unserviceable ceiling boards of any thickness incl cover fillets, complete all as specified and directed.

M&L for one coat of white washing on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots, complete all as specified and directed.

All as per item No 44 here-in before but on ceiling, soffits of slabs, chajja etc, complete all as specified and directed.

M&L applying three coats of white washing on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

M&L applying three coats of white washing on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces, complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm applied after complete removal of existing treatment of old surface of wall, complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer to new plastered surfaces of wall including preparation of surface, complete all as specified and directed.

M&L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint on surface of wall/chajja, complete all as specified and directed.

Complete removal of existing treatment of any type from walls, complete all as specified and directed.

M&L for applying 1.5mm thick wall care putty on walls to obtain a smooth surface including making good any undulations on the surfaces, complete all as specified and directed.

M&L preparation of old decorated wall surface by washing down, rubbing down and stopping of distempered and painted surface and including applying one coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and directed.

M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed.

M&L applying for one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces, complete all as specified and directed.

M&L preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L one coat of synthetic enamel paint (1st grade quality) to old decorated wooden surfaces of girth exc 10cm width or girth incl preparation of surfaces, complete all as specified and directed.

M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3), complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated :- (i) Rendering 15mm thick in CM (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm.. ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (Note-1 :- Bituminous primer shall be `TANK MASTIC’ manufactured by M/s STP Ltd or “EMUFALTE” manufactured by M/s Texsa India Ltd). (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester febric weight not less than 150gms per Sqm. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note-2 :- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. iii) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “ MOPLY FP 3mm” manufactured by M/s Texsa India Ltd & equivalent of Shivam Tar product. (iv) Applying one coat of aluminium paint @ 0.11kg/Sqm over app membrane surface.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and polished set and jointed in neat cement slurry and pointed in white or coloured cement of match laid over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed.

S&F 6 to 8mm dia TMT bar cut to length bend to shape required incl bending hooking ends and binding with MS wire (annealed) not less than 0.90mm dia as in reinforcement, complete all as specified and directed.

MS TMT bars 10mm and over dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90mm dia (annealed), complete all as specified and directed.

Form work to fins, chajja, louvers, facia and the like, complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in chajja slabs supported on walls, beams and columns in floors,roofs,chajja, landings, balconies, canopies, deck slabs and in shelves and the like including necessary demolition, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position on wall/ceiling, complete all as specified and directed.

S&L of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.( Note :- The rate includes all plain CPVC fittings mean fittings which do not have any metal component ( Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) and pipe cutting fixing with CPVC solvent cement and testing.The seprate rate for special fittings [CPVC Brass fittings (brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc), unions, ball valves, flange and tank adaptor], complete all as specified and directed.

S&F CPVC 20mm dia of brass elbow, complete all as specified and directed.

S&F CPVC 20mm dia brass elbow (3/4 X ½), complete all as specified and directed.

S&F CPVC 20mm dia brass tee, complete all as specified and directed.

S&F CPVC 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA), complete all as specified and directed.

S&F CPVC 20mm dia Female Brass Threaded Adaptor (FTA/ FBTA), complete all as specified and directed.

S&F CPVC 20mm dia tank adaptor, complete all as specified and directed.

S&F CPVC 20mm dia union, complete all as specified and directed.

S&F CPVC 20 mm dia ball valve, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc. and making good, cutting not exc 10cm girth of brick wall, complete all as specified and directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair vitreous china squatting pan ,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550x 400mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

Fixing only in repairs wash basins vitreous china (flat back or angle back type) any size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling/taking down old unserviceable water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling/taking down old unserviceable water tank, complete all as specified and directed.

Disconnecting existing water tanks of any type and description exceeding 500 ltr but not exceeding 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (cleaning repairing, etc. measured separately), complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc 250 ltr but n exc 500 ltr capacity PVC water storage tank, complete all as specified and directed..

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc 500 ltr but n exc 1000 ltr capacity PVC water storage tank, complete all as specified and directed.

S&F PTMT nipple 20mm suitable for HDPE water tank. (minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms), complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (weight not less than 210gm), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks of capacity 500 to 1000 ltr, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F PVC waste pipe for urinal/ WHB 32mm/ 40mm bore with one end with socket, complete all as specified and directed.

S&F in repair CP pillar tap 15mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, complete all as specified and directed.

Fixing only in repairs high or low level flushing cistern of any description and connections to pipes and fixing of chain and pull or lever if any, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair swivel shower rose of brass chromium plated 125mm size with long head arm for fixing with 15mm pipe, complete all as specified and directed.

S&F in repair two way angular stop cock 15mm bore chromium plated, complete all as specified and directed.

S&F in repairs vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S & F in repair vitreous china water closets, (Snow white), EWC with seat cover, cistern with lid complete set with all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and directed.

S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches, complete all as specified and directed.

S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair PVC (SWR) junction, single, (single T) equal or unequal 110mm bore, complete all as specified and directed.

S&F in repair 75mm bore, PVC (SWR) bends provided with access door of any radius, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

M &L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and directed.

S&F CP grating 100mm dia with or without waste hole, fixed to floor trap in repair, complete all as specified and directed.

S&F in repair gun metal globe gate valve 20mm bore, complete all as specified and directed.

Uprooting of tree complete repairing with PCC (1:1/2:3) by adding of water proofing compound as per menufacturer instructions and at any girth including, complete all as specified and directed.

Cleaning of vegetation /small trees,muds garbages,waste etc growth on in accessible RCC roof, AC sheet roof, below wind tie cleaning of AC sheet/CGI sheet, vally gutter and shaft portion of wall surfaces, back side of toilet portion and above chajja portion etc, complete all as specified and directed.

M&L repair to broken/damaged RCC chajjas by making good with PCC (1:2:4) type B-0 or cement mortar (1:3) rendering 15mm thick mixed with water proofing compound to top & sides and soffits in cement mortar (1:4) including necessary form work, reinforecement duly welded if required including demolition of broken/loose PCC or taking down old plaster upto a height of 9mtrs, complete all as specified and directed.

S&F in repair angular stop cock 15mm bore chromium plated, complete all as specified and directed.

S&F steel wire fabric of weight not exc 4 Kg/Sqm, complete fixed to wood or steel members, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls, complete all as specified and directed.

Taking down carefully sub main wiring of any Nos of wire and size with earth wire from wooden batten/surface conduit/casing caping etc. with its all accessories, complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories on surface wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 122 here-in before but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 122 here-in before but one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 122 here-in before but point wiring with 4.0 Sqmm cable and 4.0 Sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket, complete all as specified and directed.

M&L for switch piano flush button single pole one way 6 Amps 240 volts, complete all as specified and directed. Make : Anchor/Havells/Legrand/L & T

M&L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

M&L for switch and socket combination 5 in 1, 6A/16A flush type, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan, complete all as specified and directed.

M&L for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run of 4.0 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25mm size (ISI marked) including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 Sqmm single core PVC insulated unsheathed copper earth continuity conductor, complete all as specified and directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.)

All as per item No 132 here-in before but in PVC casing/caping, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper positio, complete all as specified and directed.

S&F MCB single pole SP of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

M&L for earthing & testing complete with GI earth plate electrode 60cmX60cmX6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below normal ground level with top edge of earth plate at a depth not less than 1.5mtr below normal ground level connected to and including earth lead wire 4mm dia by means of bolts, nuts and check nuts and washers etc. made of GI & connected to earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt I including all necessary earth work, excavation, PCC chamber, (1:2:4) B1 & RCC (1:2:4) B1 chamber cover with suitable reinforcement with handle including 15mm bore GI light grade protection pipe upto 7.5m length & 20mm bore GI medium grade watering pipe and wire mesh, funnel, char coal dust, common salt, wire mesh et, complete all as specified and directed.

S&F decorative type LED luminaire 600mm x 600mm, not less than 35/36 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including making good to the POP/grid ceiling as per existing and connecting upto with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. Make : Philips Cat part No RC 420B M LED 34S 6500 PSD WH or equivalent

S&F wall mounted LED light fitting 1 x 40 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Philips Cat part No BN100C LED40S-6500 PSU L120 GR/ Havells Cat part No STOUTPLUS1200BS40WLED857SPCWH or equivalent

S&F wall mounted LED light fitting 1 x 22 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Havells Cat part No ENDURALINEARNEOBS22WLED865SPCWH or equivalent

S&F decorative type LED mirror light wall mounting, SS finish fixture with opal glass diffuser suitable for 40W LED candle lamp with driver holder and 2x LED lamp (E14) including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells cat LHJE02206499 or equivalent.

S&F decorative type LED wall mounting light, champagne gold finish fixture with plastic body suitable for 14W retrofit LED Candle lamp lamp(B22) with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells cat LHFOECE1TZ1O014 or equivalent.

S&F decorative type LED wall mounting light (2 x 40W), chrome finish fixture with frosted glass suitable for 40W mini LED lamp (E14) with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells cat LHFOFCC2TZ1C040 or equivalent.

S&F decorative type LED mirror light wall mounting, SS finish fixture with textured glass diffuser suitable for 40W mini LED lamp including LED lamp (E27) and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells cat LHJE04104499 or equivalent.

S&F decorative type wall mounting, SS finish fixture with opal glass diffuser suitable for 40W LED candle lamp including LED Lamp (E14) and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : Havells cat LHJC01206499 or equivalent.

S&F rechargeable 6W LED emergency light with frosted PC cover and pull chord complete with rechargeable type Li-on battery of 3.7V, 2000mAh and connecting wire up to nearest electric point, complete all as specified and directed. Make : Havells cat part No LHEXTEP7EN1W006 or equivalent.

S&F round shape 12W 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, LED Lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

M/S ANIL KUMAR BAUL

M/S ASHOK ENTERPRISE

M/S RATHIN ENTERPRISES

SHRI PARTHA DUTTA

M/S. VINITA CONSTRUCTION

SHREE SHYAM TRADERS

SHRI SURAJIT SIKDER