SPL REPAIR TO FIRE HYDRENT AND FIRE ALARM SYSTEM IN SANGLI APARTMENT UNDER GE NEW DELHI

Amount

Supplying, installation, testing and commissioning of Electric driven high pressure Main Fire Pump 2280 lpm at 90 m Head suitable for automatic operation and consisting of following, complete in all respects, as required :

(a) Horizontal end suction type, single stage, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(c ) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Note:- Suitable cement concrete foundation duly plastered with anti vibration pad complete as required

Supplying, installation, testing and commissioning of Diesel engine driven main fire pump 2280 lpm at 90 m Head suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)

(a) Horizontal end suction type, single stage, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

(b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required

(c ) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

Supplying, installation, testing and commissioning of Electric driven pressurisation pump 180 lpm at 90 m Head suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)

(a) Horizontal end suction type, single stage, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.

(c ) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter?connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42. The Scope of work include the following :-

(i) Incomings : 400A, 36kA 4 Pole MCCB, Ics=100% Icu rating ,adjustable setting type

(iii) LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A

Providing and laying MS ERW Pipes, confirming to IS : 1239 Pipes complete with painting, wrapping and coating of the pipes as per IS:10211 in all kinds of soil at a depth 60 mm including excavation and refilling the trench all complete.

80mm dia

150mm dia

Supply and lay MS ERW Pipes, with all necessary fittings i.e. bends, tees, reducers, flanges (pipe to pipe connection wherever required & pipe to landing valve/FB inlet connection), gasket or any other fittings required for pipe connections. The pipes shall be painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer on exposed surface or polythene/rubber based wrapping coating on undergound surface, Galvanized, supports at standard spacing, anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including cutting, Welding, fixing in / on walls, trench, ceiling by using the supports etc. The quoted rate shall also include for chasing / chipping walls, Floors, making bore holes in walls / floor and making them good with Non shrink filler material in bore holes / finished in cement mortar etc. for undermentioned dia of pipe complete all as specified. Note for item No 5 & 6 above : The above item is included for removing excavated surplus material to a distance not exceeding 50m & depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed and the quoted unit rates are deemed included all associated work as stated herein above.

25 mm dia

80 mm dia

100 mm dia

150 mm dia

All as per item No 6 hereinabove but 200 mm dia (Wall Thickness 6.3mm) all as specified.

Supply, installation & testing , yard hydrant valve made of stainless steel, ISI marked, 75mm NB flange inlet, single way outlet type with hose coupling adaptor of 63 mm size, instantaneous spring lock arrangement and blank cap with chain, conforming to IS 5290, type 'A', suitable for hydraulic pressure of 21 kgf/cm2 incl MS pipe line of size 80 mm upto 1.5 mtr height incl MS flanged both ends making all connection for smooth functioning complete all as directed.

Supply and fixing of Butter Fly Valves (Manual) with CI body, Stainless steel disc, nitrile rubber seal & O ring, PN 16(16 bar) Pressure rating for chilled water circulation of following size, all as specified and directed.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Supply and fixing Non return valve of following size with dual plate of CI body, Stainless steel plates, vulcanised NBR seal flanged ends and PN 16(16 bar) Pressure rating, all as specified and directed of following size:-

150 mm dia

100 mm dia

Supplying, installing and commissioning C.I.flanged "Y" type Strainer 200 mm dia with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.

200 mm dia

S&F Reinforced rubber lined fire hose pipe as per IS 636, type 'A', ISI marked, 63 mm nominal internal dia, 15 M long each, duly fitted with stainless steel coupling of 63 mm size, ISI marked with multi serrated tail and double instantaneous spring lock arrangement comprising of male half at one end and female half at other end complete with rubber cup washer and conforming to IS 903, suitable for hydraulic pressure of 21 kgf/cm2, complete all as directed.

Supplying and fixing first-aid Hose Reel (30 M) with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

2 way fire brigade inlet 100 mm dia

4 Way fire brigade inlet 150 mm dia

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing 25 mm dia screwed inlet forged brass single acting air valves connected with ball valve on inlet side at top of the Risers.

Providing, installation, testing and commissioning of foot valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

150 mm dia

S&F hose box made of 18 gauge MS sheet 750 mmx600mmx250mm with double door locking arrangement in front with 4mm thick glass and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside making good surface and making arrangement for 2 hose pipe inside the box incl 65 mm pad lock complete all as specified.

Providing and fixing in position the industrial type Pressure Gauges/Pressure Switch 100 mm size with gun metal / brass valves complete as required

Providing and fixing ABC type (IS-13845) powder stored pressure type fire extinguishers of capacity 6 Kg consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Providing and fixing Carbon-di-oxide fire extinguishers capacity 4.5 kg consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.

Supply, Installation, testing and commissioning of following sizes of 1.1kv grade conductor XLPE insulated and PVC sheathed Aluminium conductor cables as per IS 7098 part-1, laid on overhead cable trays or over MS supports clamps / Tags for fixing to supports in an approved manner complete as required and as per direction of engineering incharge .3.5 Core 185 sqmm AL , Armoured cable

All as per item No 24 but 3 Core 16 sqmm Copper Flexible cable

All as per item No 24 but 3 Core 10 sqmm Copper Flexible cable

All as per item No 24 but 2 Core 1.5 sqmm Copper Flexible cable

Supply and making end termination with brass double compression gland and Copper thimbles for XLPE insulated and PVC sheathed copper/Aluminium conductor cable of 1.1kv grade of the following sizes as required . 3.5 Core 185 sqmm AL,Armoured cable

All as per item No 28 but 3 Core 16 sqmm Copper Flexible cable

All as per item No 28 but 3 Core 10 sqmm Copper Flexible cable

All as per item No 28 but 2 Core 1.5 sqmm Copper Flexible cable

Supply & Erection ,Testing of Maintenance Free Copper Bonded Earthing termination for a lower resistance value with Ground Enhancing compound to fill up the excavated earth, It absorbs the surrounding moisture and ensures dissipation of any lightning / fault current. Made of Copper Bonded steel electrode having a dia of 17.5 mm and length of 3 meters to be constructed in 450X450mm Chamber with Suitable RCC covers (including civil work for chamber).

Supply and Installation 25x5 mm thick GI Strip all as specified.

Supply and Installation of 1000 Litre PVC WHITE COLOUR water tank (THREE LAYER) including connectipn pipe, gate valve, union , tank nipple etc complete in all respect

Dismantling of Old Pumps , Hydrant Box , Hosreel drums in building shaft and retrofit work as per site condition . NOTE : (for item no 1 to 28 ) Contractor must submit typical layout plan of fire hydrant & fire alarm system both for a all block as well as pipe & valve layout and pump connection ETC for the approval of competent authority before starting the execution of work .

Supply, installation, testing and commissioning of Microprocessor based 4 loop panel Networkable analog addressable type fire alarm control panel with 640 character LCD display. The panel shall equiped with sufficient no. of loops, each loop shall have capacity of 250 analog devices in each loop four access levels, capable of taking flash scan devices, Flash EPROM sufficient no. of programmable relay controls for controlling AHU's, pressurization fans, ventilation fans at fire pump room, monitoring of fire hydrant and fire sprinkler, 240v AC power supply, automatic battery charger, 24v sealed lead acid battery sufficient for 24hrs in normal working and 2hrs during emergency as required according to specification. The panel shall be UL864 9th edition listed with response time less than 10sec. The Panel shall be able to Integrate with BMS & Security System on Common TCP/IP Ethernet Communication Bus using BACnet Transfer protocol. The panel shall have the web enabled facility which can able to send or receive e-mails with memory of 1000 events recording complete all as specified and directed.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required .

Supply Installation Testing and commissioning of Manual call point with back boxes

Supply Installation Testing and commissioning of Hooter cum sounder with back boxes

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath including 25mm dia MS condute painted with two coat of synthetic enamel paint (red) including all accessories complete as required.

Friends fire Engineers (BID ID -3325862)