RFQ 10922 Repair and Distempering of Research and Development Department Halls

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

White washing with lime to give an even shade :Old work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete

Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 5.5 mm

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disp

PROVIDING AND FIXING CIMMERCIAL PLY WOOD 4 MM THICK, ON ONE FACE IN PARTITIONS INCLUDING FIXING TO FRAMES WITH BRASS SCREWS ETC. COMPLETE AS PER DIRECTIONS OF ENGINEER IN-CHARGE. (FRAMES TO BE PAID SEPARATELY)

PROVIDING AND FIXING COMMERCIAL PLY WOOD 18 MM THICK AS PER DIRECTIONS OF ENGINEER IN-CHARGE

PROVIDING AND FIXING Sunmica, 1mm thickness of approved quality AS PER DIRECTIONS OF ENGINEER IN-CHARGE

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood

DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY

Providing and Fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats,square or round bars etc.all complete.:Fixed to steel windows by welding.

PROVIDING AND LAYING IN POSITION BITUMEN SAND FOR EXPANSION JOINT ETC USING 128 KG BITUMEN GRADE 80/100 PER CU.M OF SAND ETC. COMPLETE AS PER DIFECTION OF ENGINEER IN CHARGE.

REMOVING OLD MORTAR FROM THE JOINTS OF EXISTING CC ROOF TILES AND LAYING FRESH MORTAT OF 1:3 IN C.C ROOF TILES JOINTS AS PER DIRECTION OF E-I-C