Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹34.7 L
EMD Value
₹69,480
Closing Date
4 Sept 2020, 4:30 pmClosed
XEN REW UDHAMPUR
XEN REW UDHAMPUR
REFER BOQ
2020_RDPR_102552_1
e-NIT No. 25-REW UDHAMPUR of 2020-21 DT. 20-08-20
Open Tender
Civil Works
Item Rate
180 days
Udhampur
REFER NIT
2 documents required · 2 mandatory
₹1,000
Yes
XEN REW UDHAMPUR
₹69,480
Yes
UDHAMPUR
8 Sept 2020
21 Aug 2020
5 Sept 2020
21 Aug 2020
4 Sept 2020
25 Aug 2020
21 Aug 2020
Amount
Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables etc (not exceeding 1.5 mtr in depth) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan depth upto 1.5 Mtr including disposal of excavated earth upto 1 mtr from urring edge, dispoded earth is to be levelled and neatly dressed. Including all leads, lift and carriage complete.(70% all kind and 30 % ordinary rock)
Providing and laying in position of cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregates 40mm nominal size) Including all leads, lift and carriage complete.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) Including all leads, lift and carriage complete.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mmnominal size) Including all leads, lift and carriage complete.
Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including all leads, lift and carriage complete.
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Hot rolled daformed bars including all leads, lift and carriage complete.
Brickwork with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth in 1:6 (1cement : 6 fine sand) Including all leads, lift and carriage complete.
Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1Cement: 4 Coarse sand).Including all leads, lift and carriage complete.
Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Second class kail wood
Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 4mm thick
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:50x12mm
Centering and shuttering including strutting, propping etc and removal of the form work for: Foundation, footings, bases of column etc for mass concrete
Centering and shuttering including strutting, propping etc and removal of the form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centering and shuttering including strutting, propping etc and removal of the form work for: Columns, Pillars,Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc and removal of the form work for: Suspended floors, roofs, landings, balconies and access platform.
12 mm Cement plaster of mix 1:4 (1 cement : 4 fine sand). Including all leads, lift and carriage complete. Including all leads, lift and carriage complete.
15 mm Cement plaster on the rough side of single or half brick wall of mix 1:6 (1cement : 6 fine sand). Including all leads, lift and carriage complete.
6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) Including all leads, lift and carriage complete.
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cemen slurry, but excluding the cost of nosing of steps etc complete.50 mm thick with 20 mm nominal size stone aggregate crushed. Including all leads, lift and carriage complete.
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .1 New work (two or more coats) over and in -eluding priming coat with cement primer
Providing wood work in fames of doors, windows, clerestory windows and other fames, wrought framed and fixed in poisition with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteeners shall be paid for separately) Sal Wood
Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screw exculding panelling which will be paid for separately, all complete as per direction of engineer in charge 35 mm second class deodar wood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates be measured). Panelling for panelled and glazed shutters 25mm to 40 mm thick. plain particle board flat pressed, 3 layer or graded wood particle board mediun density grade IS 3087 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg /sqm (4 mm thick) float glass panes inclding ISI marked M. S pressed butt hinges bright finished of required size with necessary screws. 35 MM second class deodar wood
Providing and fixing 35 mm thick wire gauge shutters using galvanised M.S wire gauge of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with hinges and necessary screws.second class deodar wood
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Applying priming coat: with ready mixed aluminium primer of approved brand and manufacture on resinous wood and ply wood
Applying priming coat: with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade new steel work (two or more coats)
BALDEV SINGH
ABHINANDAN
M/s OM PARKASH GOVT CONTRACTOR
lashman singh
SHAH NAWAZ WANI
Jag mohan sawhney
ASHOK KUMAR GUPTA
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .