For Construction of Plinth for 400 KVA 11/0.4 KV Sub-Station on the Bank of Naala on Kamela Road along with Line Works etc. as to Avoid the Falling of Transformers in to Naala, Under EUDD-III, Meerut.

Amount

Dismantling of 11 KV side jumpers/connections of the transformers and making connections after works.

Dismantling of LT PVC cables from the transformers and LT distribution board/LT mains and making coil and laying after completion of works.

Dismantling/Cutting of neutral earth strip from the LT side of transformers and body of transformers and making connections after works.

Dismantling of damaged wire mash fencing of 11/0.4 KV sub-station safely from all side and shifting to 33/11 KV sub-station hapur road by proper vehicle.

Dismantling of LT distribution board of double circuit safely after removing of accessories etc. and uprooting the same.

Shifting of transformers from the plinth side to nearby side and safe placing with the help of crane and again placing on the new structure after completion of works.

Cartage of rail/RS joist/channels etc. from the dump side to works side with loading/unloading etc. required for construction of chair type structure for 400 KVA transformers.

Construction of chair type structure cutting, fabrication of rail, RS joist, channel etc. for making the chair type structure and digging of pit, making pillars out of rail/joist erection of the same with jointing, welding of structure on the same, for 400 KVA transformers complete.

Wire mash fencing of 400 KVA 11/0.4 KV sub-station.

Water level earthing of transformers by boring of earth and laying of GI pipe up to water level (approx. 60 feet) of neutral/body.

Dismantling of badly tilted double pole on the bank of naala safely after opening the accessories etc.

Digging of pit and erection of double pole on 11 Mtr. ST pole and fixing of all accessories etc.

Erection of ST pole on the bank of naala after digging of pit etc.

Fixing of stay complete.

Providing and binding of fly stay complete.

Dismantling of 11 KV line spans before the works.

Laying of 11 KV line spans after works.

Opening/Refixing of 11 KV X arms complete.

Strengthening of 11 KV line double circuit pole.

Making section of 11 KV line complete.

Resagging of HT line span.

Dismantling/Relaying of LT line AB conductor.

Cartage of pole from dump site to work site.

Providing and fixing of Al crimping lugs of size 400 sq.mm. properly.

Providing and fixing of Al crimping lugs of size 630 sq.mm. properly.

Replacement of jumpers on double pole and overhauling of the same properly.

Replacement of jumpers on double pole and overhauling of the same properly.

BHARDWAJ ENTERPRISES