SPECIAL REPAIR TO SEWAGE LINE AT W II ZONE AND OTHER SANCTIONED WORKS UNDER AGE B R II OF GE WEST FEROZEPUR CANTT

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified.

Earth work in excavation for all kind of soil by mechanical means(Hydraulic excavator) in foundation trenches or drain (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out excavated soil and disposal of surplus excaveted soil as directed, within a lead of 50m as directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc 1.5 metre but not exceeding 3 metre depth and not exc 10 Sqm on plan, for shafts, wells, cesspits, manholes, pier holes, etc and getting out,compete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc 3 metre but not exceeding 4.5 metre depth and not exc 10 Sqm on plan, for laying of cable and getting out,compete all as specified.

Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge .

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift exc 1.5 metre but not exceeding 3 metre, as directed by Engineer-incharge .

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift exc 3 metre but not exceeding 4.5 metre, as directed by Engineer-incharge.

Returning, filling in, including spreading, leveling, watering and well ramming soft/loose soil in layers n. exc 25 cm thickness omplete all as specified

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 200 mm.complete all as specified

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 150 mm.complete all as specified

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 250 mm bore pipe complete all as specified

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 250 mm bore pipe complete all as specified.

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore pipe complete all as specified.

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 150 mm bore pipe complete all as specified.

M & L 250 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches as specified

All as peer ser item No 16 above but 150 mm bore pipe.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipes complete all as specified

Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces,, surfaces finished even and smooth without using extra cement complete all as specified.

Demolition of PCC of any description and in any position as in not otherwise specifically provided for

Cement concrete (1:4:8) type D2 40mm graded agg in foundations, filling and mass concrete complete all as specified and directed

M&L for cement concrete type B2 1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified

Providing cement concrete 1:2:4 type B1 (20mm graded agg) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,E28 including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by EIC

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required.

S&F cast iron soil, waste and vent pipes of 100 mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

All as per ser item No 25 above but fixing only

S&F CI bends of 100 mm bore diminishing pieces or tapers including jointing with CM 1:3 and making good complete all as specified.

S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ears with cement joints fixed to wall complete all as specified.

All as per ser item No 29 but fixing only

S&F CI bends of 75 mm bore diminishing pieces or tapers including jointing with CM 1:3 and making good complete all as specified.

S&F 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per ser item No 34 but except bricks.

Demolition of reinforced cement concrete (reinforce-ment cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete all as specified.

M/L RCC 1:2:4 type B1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in Cement concrete 1:6 complete with joints to match complete all as specified

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per Item no-38 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified & directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified.

Cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floor topping, 100 mm thick, surface finished even and smooth without using extra cement complete all as specified.

M&L for cleaning of blockage IWCs / EWC, bathroom / kitchen by cleaning the nahani traps / gully traps and CI / PVC pipe line upto the 1st Manhole. All the mud / sludge / Kitchen waste / plants roots to be cut/ removed and getting out by washing the traps, CI waste pipe throughly by opening the cleaning eyes lids properly . The sludge/ waste received during cleaning process to be removed at a distance not exceeding 100m from the bldg and Bleaching powder to be spread over waste and burred under the Soil / Earth . Earth work shall be included in the unit rate.

Cleaning and desludging / de-watering of septic tanks /Manholes and soakage well of any depth by using honey sucker followed by mechanical roding followed by hydraulic jet pressure machine etc as required,with the entire satisfaction of Engr -in- charge and re-fixing the manholes cover to its original position complete all as specified and directed.

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm.

M/L cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

S/F mild steel work as in angle iron posts or struts for fencing conforming to Fe 290 Gde E-165 as directed including making swan neck, cutting top to shape as directed, drilling holes, notching for wire etc including cutting and twisting necessary drilling, bolting and reveting or welding etc and smilar works complete all as specified.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a one coat of red oxide all as specified.

M&L for MS nuts and bolts (machine made) with hexagonal or square heads at one end and scewed the other or screwed both ends, each screwed end to be provided with one washer and nut complete all as specified.

M/L Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc including provn of binding wire.

Supply only chain link MS galvanated fencing any size fixed to any type of stander rail n exc 3 kg per sqm

Mild steel tmt bars 8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

S/F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

Use and waste of formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat.

Use and waste of formwork to to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for cement concrete design mix M-25 (20 mm graded aggregate) as in beams, cantileveres, bressummers, lintels over 1.50 mtr span and all other similar works complete all as specified and directed.

M&L for cement concrete design mix M-25 (20 mm graded aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

Material and labour for PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

M&L for 50 mm thick cement conrete type B-1 1:2:4 (20 mm graded aggregate) as in plinth protection and other similar works finished even and smooth without using extra cement complete all as specified and directed.

Supply and fixing for mild steel flat iron as in hold fast clamps and all other similar works conforming to Fe 290. Gde -E-165 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.

S & F for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed) (Make : Hindware/Parryware.Cera)

S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions .

S&F PVC connection 15mm size PTMT nuts of length 450 mm.

Material and labour 20 mm thick granite (of an type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing,cutting grooves in wall for fixing granite with cement mortar 1:2 and all other arrangments complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

Material and labour rendering 5 mm thick cement plaster in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) complete all as specified and directed.

Supply only integral waterproofing compound

M&L for preparation of new wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed.

Material and labour Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Material and labour rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical tiles and all other similar works complete all as specified and directed.

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

M & L for 150 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.

M & L for PCC 1:3:6 type C2, (using 40 mm graded aggragate) as in concrete bed to 150 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as directed.

M&L for PVC (SWR) multi floor trap in repair with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed.

M&L for PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius.

Material and labour for application of bituminous primer conforming to IS-3384 @ 0.20 kg per sqm and applying 3 mm thick APP base polymeric modified membrane reinforced with non woven polyester mat, weight not less than 3.5 Kg per sqm laid by torch application method (LPG Torching method) overlap while torching shall be 100 mm on transverse direction and 75 mm on longitudinal direction and applying bituminous aluminium paint @ 0.15 kg per sqm on top complete including as per manufacturers instructions all as specified and directed by Engineer-in-Charge.

S&F for PVC rotational water tank by providing new rotational moulded triple layered polyethelene water storage tank double layered ISI marked (Cylindrical verticle with closed top) hoisted and fixed in position all as directed of capacity 500 ltr including dismantling & taking out old unserviceable item complete. (Make :- Sintex/Polycon/Ashis Plast).

S&F for Gun metal globe or Gate valve with iron wheel screwed both end for iron pipe and fixed as per requirement of site and as directed by Engineer in charge including dismantling and taking out old unserviceable item complete of 25 mm size. (Make - Leader/Zolata/Hindustan).

Supply and fix ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm dia.

S&F Gun metal globe or Gate valve with iron wheel head, screwed both end for iron pipe and fixed as per requirement of site and as directed by engineer in charge including dismantling and taking out old unserviceable item complete fo 20 mm size. (Make :- Leader/Zolata/Hindustan).

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L precast kerb stone of size as specified with concrete mix 1:2:4 type B1 using 20 mm graded aggregate set in CM 1:4 complete all as specified and directed.

M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer coat as in kerbs stones and all other similar works as per approved patteren complete all as specified and directed.

M&L for broken bricks hardcore of gauge n. exc. 63 mm , deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 ( 40 mm graded aggregate) as in sub base to flooring and other similar works complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L macine finished precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade laid over sand cushning with grey cement and no pigment all as specified and directed.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing ceiling rose PVC/Polycarbonate, isolated three terminals.

S&F LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXARP7SN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply and fixing in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

Supply & Fixing Lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 10 Sqmm 2 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

S&F Galvanized steel tube 40 mm dia light grade complete all as specified and as directed

M& L for Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as directed.

Supply and lay bricks of old size sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

Supply and laying galvanised mild steel tubing medium grade 25 mm bore with all fittings,laid in trenches,in floor/under road on wall complete all as specified

All as per item no 121 but 20 mm bore complete all as specified

M/s Sanjiv Kumar