Replacement of Broken Wood Work and Renovation of Kitchen in Juvenile Justice Board, Sector-25, Chandigarh

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (As per DSR 4.1.10)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm (As per DSR 8.2.2.2)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (As per DSR 8.31)

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : (copper oxidized as per IS: 1378) 150 mm (As per DSR 9.59.1)

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : (copper oxidized as per IS: 1378) 150 mm (As per DSR 9.67.1)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (As per DSR 9.83)

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm (As per DSR 9.90.2)

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 75 mm (As per DSR 9.90.4)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (As per DSR 9.96.1)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (As per DSR 9.97.3)

150x10 mm (As per DSR 9.97.4)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (As per DSR 9.100.1)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (As per DSR 9.101.2)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (As per DSR 11.26.1)

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (As per DSR 11.27)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) (As per DSR 13.2.1)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (As per DSR 13.41.1)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (As per DSR 13.80)

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (As per DSR 15.25)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (As per DSR 15.56)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (As per DSR 15.60)

Providing and fixing wooden cabinet of 12” deep and 2' high with openable (solid, glass or louvered) shutter and shelves, in hanging position at any height upto 9' consisting of 19mm thick termite resistant commercial board, finished 1mm thick superior quality white sunmica for front side, lipped with hard wood lipping of size 19mm x 6mm on exposed edges (to be painted with paint matching with lamination) include cost of piano hinges and handles (S S finish 5"), magnetic catchers (double strip horizontal style), nail, screws, synthetic adhesive etc. and painting two coats of enamel paint over 1 coat of primer on inner side of board and fixed in position with help of fasteners at wall (As per Architectural drawing for this work) complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)

Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked. The both sides of shutter is to be furnished with 1mm thick ISI marked superior quality mica of approved shade in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)

Providing and fixing 2’ deep cabinet underworking shelve made out with 19mm thick commercial ISI marked board and front portion of the cabinet furnished with 1mm thick superior quality white sunmica on outer side and 0.8mm thick sunmica inner side of the cabinet and synthetic enamel paint over the remaining portion. It also includes the cost of 03 nos. SS handle 5", 04 nos. magnetic catcher double strip horizontal style adhesive , SS bright finished piano hinges, nail, screws etc. complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)

Providing and fixing wooden cabinet of 13½” deep and 2’-0" height with open able shutter consisting of 19mm thick with commercial board (ISI marked) lipped with teak wood lipping of 19mm x 6mm on exposed edges include cost of nail, screws, piano hinges, magnetic catchers, synthetic adhesive etc. The front shutter and sides are to be furnished with 1mm thick ISI marked superior quality mica of approved shade and inner side of the cabinet with 0.8mm thick mica of approved shade fixed in position with help of wooden gutties at wall complete in all respect to the entire satisfaction of Engineer in charge. (N.S.)

Providing and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by the Engineer in charge) 0.50mm +-5% total coated thickness (TCT) thick zinc coating 100gsm as per IS 277 in 240mpa steel grade, 5-4 microns epopxy primer on both sides of the sheet and polyester top coat of 15-18 microns. Sheet should have protective guard film of 25 micron minimum to avoid scratches while transportation and should be supplied in single length upto 12 metres or as desired by the Engineer in charge. The sheet shall be fixed by using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete in all respects and to the entire satisfaction of the Engineer in charge. (N.S.)

Providing and fixing 5mm thick Acrylic glass Panes (Unbreakable) over existing chowkhats or glazed shutter, Fixed with Preferably with Silicone or the nails as per the site conditions including the cost of nails or Silicone etc complete in all respects to the entire satisfaction of Engineer-in-charge. (N.S.)

Providing and fixing 35mm thick golden champ wood (kiln seasoned) acrylic sheet window shutters consisting of vertical and horizontal styles 75x35mm size with 5mm thick acrylic sheet fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 2 nos. 3" hinges, 2 nos. Aluminium tower bolts 4", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more coats (N.S.)

Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. (N.S.)

Painting one or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered surfaces to give an even shade complete in all respects and to the entire satisfaction of the Engineer in charge. (N.S.)

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc. and then laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over after providing 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. Payment of any unserviceable material disposal to the dumping ground shall be made separately. (Based on DSR 16.83 & DSR 16.84) (N.S.)

Providing and fixing of cupboard shutter consisting of 19mm thick commercial board in existing chowkhat frame with piano hinges and screws etc. and provide with Alum. handle (with base plate), 2 nos. magnetic catcher, cupboard lock, nails, screws, Alum. hasp & staple & fevicol. The front side of shutter is to be furnished with 1mm thick ISI marked superior quality mica of approved shade and inner side of the shutter with 0.8mm thick mica of approved shade fixed in position, complete in all respects and to the entire satisfaction of the Engineer in charge. (N.S.)

Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge. (N.S.)