Repair and maintenance of Public Toilet near Marshall Bazaar, Ward No.4

Amount

SSR-03022,03024 Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm)

SSR-03006 Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundn etc n. exc 10sqm on plan and n. exc 1.5m in depth

SSR-04025 M&L PCC 1:4:8 type D-2 (40mm graded agg) in foundn filling and mass concrete in trenches and grade beam

SSR-04053 M&L RCC M-25(20mm graded aggregate) Design as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs and mass concrete (PLINTH BEAM/GRADE BEAM)

SSR-04058 M&L RCC M-25 Design Mix type B1 (20mm graded aggregate) in columns pillars etc .

SSR-04057 M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, Lintels over 1.5 m span etc complete.

SSR-04055 M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete.

SSR-07004 M&L Form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete all as specified and as directed (PLINTH BEAM OR GRADE BEAM )

SSR-07014 M&L Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete all as specified and as directed

SSR-07010 M&L Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete all as specified and as directed

SSR-07006 M&L Form work to rough finished flat surfaces as in soffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

SSR-05010 M&L Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

SSR-05005 M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed

SSR-10034 M&L Mild steel TMT bars 10mm mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

SSR-03019 M&L Sand filling under floors or in foundations including watering and consolidation

SSR-13063 M&L Bricks, sub class B, laid flat, in floors, old size brick for flooring

SSR- 03042 M&L hard core of broken bricks of gauge n. exc 63mm deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface complete all as specified and as directed for grade/plinth beam

SSR-13035 M&L 100mm thick PCC 1:4:8 type D-2 (40mm graded agg) in sub base complete all as specified.

SSR-03033 Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

SSR-04100 Supply only water proofing compound (liquid),ISI marked.

SSR-14001,14004,14005 M&L for Rendering 15 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately

SSR-14001,14004,14005 M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and as directed

SSR-13083,14009 M&L non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified. Make : Somany/Johnson/Kajaria

SSR-08095 S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and as directed

SSR-08101 S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by EinC

SSR-18082 S&F 2000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I. Make : Syntex/Rotex

SSR-18129 S&F nipple suitable for HDPE water tank (min weight 15mm-38gms)

SSR-18104 S&F Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

SSR-18322,18269 S&F vitreous china WHB size 550x400 mm white flat back excluding taps, waste, chain & plug & porcelain stopper but including brackets complete all as specified and as directed.

SSR-18302,18247 S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

SSR-18316,18322 S&F 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float & handle including bracketscomplete all as specified and as directed

SSR-18214 S&F PVC (SWR) nahani/ floor trap, plain with grating including jointing with solvent cement 75mm dia etc complete

SSR-18094,18906 S&F bib tap 15 mm bore, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

SSR-18097 S&F 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and as directed

S&F CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. Make - Prayag/Parryware

SSR-18102 S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed

SSR-18326,18254S&F plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and as directed.

SSR-18194 S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and as directed

SSR-18181 S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. Make : Prince, Finolex

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

SSR-18224 M&L for 150 mm dia reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified.

SSR-18218 M&L for concrete bed to drain pipes of 150mm dia including packing under & haunching against the sides of pipes after they are laid and tested;in PCC 1:3:6 type C2 concrete complete all as specified and as directed

SSR-13081 M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

SSR-18248,18306 M&L vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe

SSR-18322 M&L Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

SSR-18077A Supplying and laying of \CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. 32mm dia

SSR-18077A Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. 20mm dia

SSR-03009A,03009B Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

SSR-Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

SSR-13063 M&L Bricks, sub class B, laid flat, in floors, old size bricks

SSR-03019 M&L Sand filling under floors or in foundations including watering and consolidation

SSR-04025 M&L Cement concrete in foundations, filling and mass concrete using 40mm graded aggregate type C-2 1:3:6

SSR-05010 M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4

SSR-05011 M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4

SSR-14001,14004,14006 M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in 1:4

SSR-04055 M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete.

SSR-10034 M&L Mild steel TMT bars 10mm mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

SSR-07006 M&L Form work to rough finished flat surfaces as in soffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

SSR-19305 M&L One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Wiring with copper conductors in PVC conduit

SSR-19306 M&L One light point or one fan point controlled by one switch with cables 1.5 sq. mm size

SSR-19312 One 3 pin socket outlet 5 amps on the same board with other switches, with cables 2.5 sq. mm size

SSR-19389 M&L Modular switch 1 way 6A, 1 module

SSR-19390 M&L Modular switch 1 way 10A, 1 module

SSR-19384 M&L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

MANISH KUMAR SINGH (BID ID -3288471)