SPL REPAIR TO BLDG NO D-01 (08X OR MD ACCN) AT 336 FD HOSPITAL UNDER GE SAUGOR

Amount

Demolition of cement concrete un reinforced in ground floors and paving not exceeding 15cm thickness below or above ground level complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not exc 15cm thickness complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with kiln burnt bricks (old size) built in CM (1:6) using sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

M&L for brick work with old size subclass 'B' bricks, straight or curved on plan in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or surface other than fair face of brick work in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed.

M&L two coat cement plaster ,first coat 15mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be paid measured and seperately under respective item

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:4) in finished even and smooth without using extra cement in ceiling complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 1 mm thick for levelling the surfaces of walls complete all as specified and directed.

M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces on new wall surface including preparation of surfaces complete all as specified and directed..

M&L for applying two coats exterior emulsion over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed. Make:- ACE paint or equivalent make as specified in Appx ‘C’ of Particular Specifications

M&L for applying two coats exterior emulsion over one coat of exterior primer including preparation of surfaces of old surfacesof walls complete all as specified and directed. Make:- ACE paint or equivalent make as specified in Appx ‘C’ of Particular Specifications

M&L for preparation of old ceiling surfaces and applying two coats of White wash on ceiling surfaces complete all as specified and directed.

M&L three coats of white wash on newly plaster surface of ceiling including preparation of newly surface complete all as specified and directed.

Treatement for sunken portion is as follows including demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed:-

M&L for providing 12 mm dia holes of 40mm deep @200mm c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry with dr fixit grouting compound by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed

M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and smooth without using extra cement.

M&L for applying two coats of Dr Fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces.

M&L for PCC 1:5:10 type D2 using 40 mm graded stone aggregate as in filling (sunken portion).

M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.50 but not exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

M&L for pressed steel frames for doors 105mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C-0 complete all as specified and directed.

M&L for pressed steel frames for doors 125mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C0 all as specified and directed.

S&F 35mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters factory made, open rebated and prepared to receive glass, gauge, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fritted to chowkats complete all as specified and directed.

S&F 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 300mm Aluminium alloy, anodised, sliding door bolt (not less than 15mm dia) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC flush door shutter, 28 to 30mm thick (stiles), with 5 mm thick moulded prelam PVC sheet on the front face & 5 mm thick prelam PVC sheet on back face, centre core will be PVC battern complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed.

S&F 125 mm long aluminium handles cast type anodised etc all as specified complete all as specified and directed.

S&F 125 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with sutter of size min 92 X 31.75 mm,side and top of size min 92 X31.75, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 5 mm thick plain sheet glass with rubber gasket,brush and aluminium beading , aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F double rebate openable / fixed windows powder coated consisting of frame of size min 63 X 38.1 mm, shutters frame for glass and wire gauzed shutter of size 38.1X19.05 mm, with locking arrangements with 5 mm thick plain sheet glass with rubber gasket,brush and aluminium beading , aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F fixed type ventilators powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40 mm x40 mmx 5 mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm,diagonally bracing of 30 mmX5 mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width 0.7 to 1.2 m and ht 1.9 to 2.10 M.]

S&F MS framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors etc conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L stainless steel wire cloth, 0.46mm nominal dia of wire and averaging width of aperture 1.14mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 18 mm thick marine plywood interior grade with 1 mm thick white mica lamination on one side and 1 mm thick coloured mica on another side fixed in as cubboard shutter and kitchen cabinet complete all as specified and directed.

S&F teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick prelaminated boards complete all as specified and directed.

S&F continuous (piano hinges, mild steel, bright finish or electro galvanished width of flaps (when opened) 40mm complete all as specified and directed.

S&F Aluminium handles 100mm size, cast type, anodised complete all as specified and directed.

S&F 100 mm Hasp and staple, safety type, aluminium anodised, with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, incl all necessary labours, 50mm mild steel hinges, articles not exc 200 cucm each complete all as specified and directed.

S&F mild steel 300mm long ordinary rat rail tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F mild steel pre painted hat pegs solid body set of six Nos complete all as specified and as directed.

S&F 25mm bore prepainted MS conduit drapery rods, suitable for door/widows curtain with fancy type powder coated ms dooms with brackets fitted to each end and fixed to wall complete all as specified and directed.

M&L for two coats of synthetic enamal paint over a coat of pink primer on newly wood/wood based surfaces over 10cm width or girth incl preparation of new surface complete all as specified and directed.

M&L for two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new steel surfaces complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in landing, cooking platforms, shelves complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs, landings, shelves and similar work n exc 200mm thick horizondal or sloping complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Excavation over areas, not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated material and thrown exc 50mtr but n.exc 250mtr and depositing where ditected at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

M&L for approved earth filling with approved soil brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for broken stone or boulders hard core of gauge not exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of joints with bituminous compound complete all as specified and as directed

M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment including 30 to 50mm stone dust cushioning complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding ,removal servicable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in sub base of floor complete all as specified and directed.

M&L for non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

All as per Srl item No.62 above but as in dado / skirting laid over and including 10mm thick rendering in cm (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for glazed ceramic tiles of size 450mmx300mmx7mm thick, (joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Granite stone 20mm thick machine cut, bedding & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type over and including 10mm thick screed bed in CM 1:4 as in kitchen platform complete all as specified and directed.

M&L for mirror polished/prepolished machine cut Kota stone single piece slab as in steps tread,windows cill,18mm to 20mm thick laid over and including 15 mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing complete all as specified and directed.

M&L for Kota stone slab 12mm to 15mm thick mirror polished in skirting, steps riser etc over and including 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution complete all as specified and directed.

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly including taking down steel tubing 15mm bore and connection complete all as specified and directed.

S&F in replacement 20mm bore GI tubing medium grade gavanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified and directed.

M&L for cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls complete all as specified and directed.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms) complete all as specified and directed.

S&F CP hot & cold water wall mixure unit with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed.

S&F in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms) complete all as specified and directed.

S&F in repair 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified complete all as specified and directed.

S&F wash hand basin mixture15mm bore cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes and fixed in repairs complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550mmx400mm with full size pedstal including S&F angle iron brackets CP waste coupling, 32mm dia and PVC waste pipe 32mm dia complete all as specified & directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 610 mm x 460 mm x 254mm, bowl size 560mm x 405mm x 254mm ( cat no. 1224SD) of make prayag or equivalent complete all as specified & directed.

S&F Stainless steel 1mm thick kitchen plate rack of size 31" X 36" X 10" complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity, dual (5 Ltr/10 Ltr) valve less including flushing pipe bend PVC bend, PVC connection complete all as specified and directed.

S&F Aluminium anodised tubular towel rail 600mm long between flanges, 20mm dia, D type complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160mmx160mmx90mm fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position three layered wall construction of 1000 Ltrs Capacity ISI marked complete all as specified and directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & as directed

S&F 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified & as directed

S&F in repair PVC (SWR) pipe single socketed 110mm bore in any length with adhesive joint laid in floor or fixed to wall with mild steel clamps of suitable size complete all as specified & as directed

S&F in repair PVC (SWR) pipe single socketed 75mm bore in any length with adhesive joint laid in floor or fixed to wall with mild steel clamps of suitable size complete all as specified & as directed

S&F in repair PVC Bends any radius 110mm dia provided with access door complete all as specified & as directed

S&F in repair PVC Bends any redius 75mm dia provided with axcess door complete all as specified & as directed

S&F in repair PVC (SWR) Junction single T equal or unequal 110mm dia provided with eccess door complete all as specified and directed.

S&F in repair PVC vent cowl 110mm dia complete all as specified & as directed

S&F in repair for 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed. .

M&L for PCC 1:2:4, type B0 (using 12.5mm graded stone aggregates) mixed with integral waterproofing chemical/compound as in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid for separately

M&L for provn of water proffing roof treatment to RCC roof with APP modifed membrane, thickness of membrane not less than 3 mm and weighing not less than 3 kg/sqm comprising with following items and all as specified (for Non-Acessable Roof):- .

The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimneystacks, etc. and other similar situation to ease up about corners.

Bitumious based Primer conforming to IS: 3384 @ 0.3 Kg/SM to be applied on prepared surface, till the surface is property impregnated.

After the application of approved bituminous primer the App water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer’s instruction. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.

All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.

Apply two coats of bituminous aluminium paint over APP membrane @ 0.30 Kg/Sqm complete all as per manufacturers instructions.

M&L for provn of water proffing roof treatment to RCC roof with APP modifed membrane, thickness of membrane not less than 3 mm and weighing not less than 3 kg/sqm comprising with following items and all as specified (for Accessible Roof):- .

The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimneystacks, etc. and other similar situation to ease up about corners.

Bitumious based Primer conforming to IS: 3384 @ 0.3 Kg/SM to be applied on prepared surface, till the surface is property impregnated.

After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer’s instruction. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.

All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick,with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15 mm screed be in CM (1:4) complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:4 mixed with WPC applied over the roof slab when concrete is green after the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/Sqcm using cement based cement grout. After the surface is repaireds the slab will be tested for water tightness again before proceeding with further treatment complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for precast reinforced cement concrete 1:1/2:3 type B-1 (using 20mm graded stone aggregates) as in cover slab of manhole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping , benching, floors and like including weathering, slightly rounded or chamfered angles and throating including form work complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkhat and frames, wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F chicken wire mesh 0.71mm dia and aperture size 25mm fixed in position complete all as specified and directed.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed.

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete incl cutting and chasing in stone/brick masonry complete all as specified and directed:-

One light, fan point controlled by one switch

One call bell point controlled by one push button switch.

One 5 Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

One light, point controlled by two way switch

All as per Srl item No.111 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated, sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead ditto

S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F Modular switch, two way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W 2 module complete all as specified and directed

S&F modular bell push 6A ,1 module complete all as specified and directed

S&F call bell ding dong 230 Volt , single phase complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300MM sweep with, blades, and frame and louvers incl making hole stone/ brick wall complete all as specified and directed

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM incl making hole stone/ brick wall complete all as specified and directed

Taking down and refixing connecting electric water heater (Geyser 25 ltr) Incl supply and fixing of pvc pipe, fasterner complete all as specified and directed by Engr in charge.

Taking down fan ,sealing cable end, dismantling blades and removing fan and blades deposited to MES store and all as directed by Engr-in-Charge.

S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed

S&F ceiling fans complete with blades, down rods,with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Taking down and refixing connecting electric meter SP up to 60 Amp incl S & F suitable board close recessed type of suitable size complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit size less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as Srl item No.135 but SPN 40 Amps, 240 V.

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 63 Amps MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed.

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm, 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable and getting out hard / dense soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated surplus material not exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed

S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

v k builder

m/s mohansingh

M K Construction

maharaja construction and suppliers

Pandey Construction and Engrs