Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC | L1 | Accepted-AOC Work Order Issued | |
| 2 | L2₹26.8 L+₹24,190 (0.91%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | Not Admitted-Finance KANAKALAPETA YANAM | - | Not Admitted-Finance Others-The bidder has three works on hand in this division by which he is fulfilling having three works this bid is not admitted as per the NIT Condition. | |
| 4 | Not Admitted-Finance YANAM 533464 | YANAM | YANAM | PUDUCHERRY | 533464 | - | Not Admitted-Finance Others-The bidder has two works on hand in this division and in addition he also being the L1 for the Tender No.83 by which he is fulfilling having three works, this bid is not admitted as per the NIT Condition. |
Tender Value
₹27.4 L
EMD Value
₹54,801
Closing Date
12 Sept 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Improvements to Open area Restaurant and attending repairs to Family Restaurant at Seagulls Restaurant at Tidal lock Yanam
2023_PWDC2_13568_1
88/EEY/2023-24
Open Tender
Civil Works
Item Rate
120 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹54,801
3 Oct 2023
4 Sept 2023
12 Sept 2023
4 Sept 2023
12 Sept 2023
4 Sept 2023
Amount
15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
20.2.3 Boring , providing and installing bored cast -in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring , with bentonite solution and temporary casing of appropriate lenghth for setting out and removal of same and the lenghth of the pile to be embedded in the pile cap etc. all complete , including removal of excavated earth with all lifts and leads (length of pile for payment shall be measured upto bottom of pile cap) - 450 mm dia piles.
2.6.1A Earthwork in excacavation over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil.
4.2D.MO Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness using 0.68cum of sand & 0.62cum of gravel for 1cum finished to a soaked CBR value of minimum 20 including cost and conveyance of sand and gravel to the work site and stacking to the standard departmental gauge for premeaurement, mixing the required quantities of sand and gravel, spreading watering and consolidation the mix by power roller rolling to achive the required proctor density including the labour charges for mixing, spreading, hire and fuel charges for power roller and all other tools and plants employed etc., complete. As per clause no 401 of MOT specification.
2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.
4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
5.9.2 Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness) including attached pilasters , butteresses, plinth and string courses etc
11.40.2 Providing and laying rectified ceramic rustic / matt finish floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany/ Nitco) in all colours shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
5.9.1 Centering and shuttering including strutting, propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete.
5.9.5 Centering and shuttering including strutting, propping etc and removal of form for - Lintels, beams, plinth beam, girders, bressumers and catilevers.
5.9.6 Centering and shuttering including strutting, propping etc and removal of form for - Columns, Pillars Piers, Abutments Posts and Struts.
5.9.7 Centering and shuttering including strutting , propping etc and removal of form for - Stairs , (excluding landings) except spiral –staircases.
5.9.3 Centering and shuttering including strutting, propping etc and removal of form for - Suspended floors, roofs, landings, balconies and access platform.
5.1.3 Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses, plinth and sting courses , fillets, columns , pillars ,piers, abutments posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
5.3 Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves, chajjas, lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost of centering ,shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more.
6.4.1 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4 coarse sand)
13.1.1 12mm cement plaster of mix -1:4 (1 cement : 4 fine sand).
13.16.1 16mm Cement Plaster of 1:3 (1 Cement:3 fine sand).
10.28 Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding. Buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab withsuitable arrangement (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.,).
13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm
21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron).
21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainlesssteel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron).
21.3.2 Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of5.50 mm thickness.
21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II , in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre- laminated particle board with decorative lamination on both sides.
21.17.3 Providing and fixing Anodised aluminium , minimum anodic coating of grade AC 15 grill of required pattern / design over the doors, windows and ventilators etc., including fixing (but excluding the cost of the sections, which will be paid separately).
9.71.1 Code No.9.71.1:Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.complete - 125 X 64 x 2.50 mm.
21.13 Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. Complete
21.16.2 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete - Powder coated minimum thickness 50 micron aluminium.
9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete.
9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI , IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete.
E 437 Supplying and laying 4x50sqmm cable etc complete as directed by the Engineer in charge.
1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm
1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 20mm.
1.33 Code No.1.33:Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box / wooden block including connection etc as required.
1.23.1 Supplying and fixing following piano type switch / socket on the existing switch box /cover including connections etc.as required - 5/6 A switch
1.23.3 Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 2 way 15/16 A switch.
1.25 Supplying and fixing two module stepped type electronic fan requlator on the existing modular plate switch box including connections but excluding modular plate etc as required
2.10.5 Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Triple pole and neutral.
Basic Code No. 3127.O Providing and fixing 1200mm sweep double ball bearing ceiling fan Make: Almonard/Usha etc complete as directed by the Engineer in charge.
Basic Code No. 3051.O 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj etc complete as directed by the Engineer in charge.
Basic Code No. 1101 Supplying and fixing 1.5sq.mm ISI maked, FRLS PVC insulated,single core copper conductor cable (multistrand) etc complete as directed by the Engineer in charge.
Basic Code No. 1102 Supplying and fixing 2.5sq.mm ISI maked,FRLS PVC insulated,single core copper conductor cable (multistrand) etc complete as directed by the Engineer in charge.
Basic Code No. 1103 Supplying and fixing 4.0sq.mm ISI maked,FRLS PVC insulated,single core copper conductor cable (multistrand) etc complete as directed by the Engineer in charge
Basic Code No. 1104 Supplying and fixing 6.0sq.mm ISI maked,FRLS PVC insulated, single core copper conductor cable (multistrand) etc complete as directed by the Engineer in charge.
Basic Code No. 3286 Supplying and fixing 2.0 Ton Split Type AC unit with all accessories including stabilizer (3 star) Panasonic / Dikin etc complete as directed by the Engineer in charge.
LUCKY INFRA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .