REPAIR AND MAINTENANCE OF B R AND E M WORKS AT HQ SFF CAMPUS IN AOR OF GE (AF) FARIDABAD (2ND CALL)

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 above here in but except bricks complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care compound of altek/birla putty for exterior on Old/New Plaster and scraped wall/ceiling surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. Note : Colour and make as approved by Engineer-in-Charge.

M&L for one coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care compound of altek/birla putty for exterior/interior on old scraped wall/ceiling surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. Note : Colour and make as approved by Engineer-in-Charge.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on wall/ceiling over one coat of primer incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying one coats of distemper oil emulsion on wall/ceiling over one coat of primer incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of white wash on surface of ceiling complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

All as per item No 22 above item but here-in size of frame 125mmx60mm for doors complete all as specified and directed by Engineer-in-Charge.

S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engineer-in-Charge.

S&F for 2nd class H.W. glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads etc complete all as specified and directed by Engineer-in-Charge.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed by Engineer-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

M&L for factory made box type steel windows, 16 gauge steel section for frames & shutters, as per TD drawing No.219, sheet 01/03 to 03/03, using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40X4 mm complete including grill of 10 mm square bar, fixed horizontally @ 10 cm centre to centre, pintel hinges 75 mm long 12 mm dia, 100 mm long handle, 150 mm long tower bolts, lugs etc. with/ without cooler provision, complete all as specified and directed by Engineer-in-Charge. Note :- (i) For purpose of measurement and payment double shutter with frame including square grill shall be considered as one unit. (ii) Glazing and wire mesh shall be measured and paid for separately in respective of item. NOTE : Item includes cost of double shutter of gauged and glazed shutter with square bar grill.

S & F steel windows or ventilators, fixed type,with glazing bars complete all as specified and directed by Engineer-in-Charge.

S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and complete all as specified and directed by Engineer-in-Charge.

S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.

S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge.

S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane incl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed by Engineer-in-Charge.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed by Engineer-in-Charge.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F for aluminum handles cast type anodized 200mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth n. exc 10cm complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and directed by Engineer-in-Charge.

M&L for extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked), complete all as specified and directed by Engineer-in-Charge.

M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified and directed by Engineer-in-Charge.

M&L for aluminium Fanlight catch with 14mm catch and fixed suitable for any shutters, complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm size Hasp and staple, safety type mild steel,wire type,stove enamelled black,including bolt to hinge plate with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repair 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed by Engineer-in-Charge. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.

M& L for Glazed ceramic jointless coloured group of size 300/350mmx450/600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. Note : shade & design as approved by EIC/GE

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white incl roundening the edge of stone complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as specified and directed by Engineer-in-Charge.

Easing and Adjusting without taking down any type wooden shutters exc 1 Sqm but n exc 2 sqm each and refixing in same opening after replacement of defective portions such as wire cloth, beeding, handles, hinges, locking arrangements complete all as specified and directed by Engineer-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F in repair of door closer hydraulically regulated design No 3, universal type, suitable for door shutters of 851 to 1000m in width and weifht between 61 to 80 kg etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed by Engineer-in-Charge.

M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate including welding /reveting to bring the steel gate /wicket gate in service condtions etc complete all as specified and directed by Engineer-in-Charge.

S&F ventia blind for window including necessary items required for fix to wall complete all as specified and directed by Engineer-in-Charge.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and directed by Engineer-in-Charge.

S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engineer-in-Charge.

S&F in repair 4mm thick figured glass pane fixed in window shutter/ventilators including necessary beading/wooden beading andoil putty complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in of any desciption and in any position not otherwise specifically provided for (sunken floor) and concrete debris and rubbishoff to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken/Roof slab complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed by Engineer-in-Charge.

M&L, cement concrete 1:7:12 F-2 (40 mm graded aggregate ) in lean concrete complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.16 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge.

M& L for Glazed ceramic jointless light/coloured group of size 350mmx450mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. Note : shade & design as approved by EIC/GE

M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantelling of stone slab etc complete all as specified and directed by Engineer-in-Charge.

M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engineer-in-Charge.

Fixing only for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engineer-in-Charge.

S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.

Fixing only for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as specified and directed by Engineer-in-Charge.

S&F of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern in repairs complete all as specified and directed by Engineer-in-Charge.

S&F for Vitreous China wash basin , White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

fixing only for Vitreous China wash basin , White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap & waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair Soap dish, stainless steel approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed by Engineer-in-Charge.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed by Engineer-in-Charge.

S&F for 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.

S&F CP jet for EWC along with pvc connection complete all as specified and directed by Engineer-in-Charge.

S&F for Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No. AKP 35753PS or equivalent.

S&F for Health faucet brass CP with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No. ALD CHR-573 or equivalent .

S&F in repair for Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms), complete all as specified and directed by Engineer-in-Charge.

S & F for Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe in repairs complete with all fittings complete all as specified and directed by Engineer-in-Charge.

S & F in repair Stainless steel plate rack (bartan stand) made with 4-5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size complete all as specified and directed by Engineer-in-Charge.

M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and directed by Engineer-in-Charge.

S&F for CI floor trap, plain with CP grating including jointing with solvent cement, 75/100mm diameter of outlet, complete all as specified and directed by Engineer-in-Charge.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including new waste coupling and waste pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed by Engineer-in-Charge.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge.

S& F for swan neck pillar cock fancy type chromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed by Engineer-in-Charge.

S&F for PVC connections 60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge.

S&F in repair grating round 75/100/125mm size of CP complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm PVC float valve incl ball and rod ccomplete all as specified and directed by Engineer-in-Charge.

S&F in repair 32/40 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm?45gms/ 40mm-60 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 32/40 mm dia Waste coupling of PTMT (half or full threaded) suiotable for urinal . (Minimum weight 32mm?45gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC water tank lid with locking arrangement complete capacity (500 ltr -1000 Ltr) complete all as specified and directed by Engineer-in-Charge.

S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified and directed by Engineer-in-Charge.Make: Jaquar Cat Part No. OHS 1779 for shower and SHA 49483 for arm or equivalent.

Removing plants / sherbs duct wall , junction with roots using herbicide chemical of existing brick or concrete for multistoried building at any storeyed and any height and match the surface with existing surface using 1:3 CM, complete all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting, GI nipple and any fitting ,dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting,GI nipple and any fitting , tank cover dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

S&F for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position. (incl writing in white paint of 150mm size " Tank cleaning on dt _______ " complete all as specified and directed by Engineer-in-Charge. (a) Tank Capacit exc 250 Ltr but n exc 500 Ltr.

S&F for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position. (incl writing in white paint of 150mm size " Tank cleaning on dt _______ " complete all as specified and directed by Engineer-in-Charge. (a) Tank Capacit exc 500 Ltr but n exc 1000 Ltr.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair for Gun-metal globe or gate valves of 20mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc complete incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 75mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and directed by Engineer-in-Charge.

S& F in repair for 75 Cast Iron Cowl complete all as specified and directed by Engineer-in-Charge.

S& F in repair for 100 Cast Iron Cowl complete all as specified and directed by Engineer-in-Charge.

S&F for repair CI inspection eye plates/cover of size up to 100 mm dia as in repairs of any location including gasket and nuts etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Removing excavated material to a distance exceeding 1.50 km but n exc. 5 km and depositing where as directed at a level n. exc 1.50 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators complete all as specified and directed by Engineer-in-Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 139 above but 5 Amp socket outlet, independent complete all as specified and directed by Engineer-in-Charge.

All as per item No 139 above but on the same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 139 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 139 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of switch 15 Amps SP one way ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic sheet etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for modular switches 6 amps single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for modular sockets out let 6 amps 6 pin 2 module with shutter complete all as specified and directedby Engineer-in-Charge.

S&F in replacement for modular switches 16 Amps single pole one way complete all as specified and directed.by Engineer-in-Charge.

S&Fin replacement modular socket out let 6-16 Amps 3 pin combined shuttered complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of ding dong bell electric 230 volt AC complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 25 Amps complete all as specified and directed by Engineer-in-Charge.

M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 6 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable acomplete all as specified and directed by Engineer-in-Charge. NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 155 above here-in-before but copper cable single core of size 4 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity complete all as specified and directed by Engineer-in-Charge. NOTE :- 2 runs of 4 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

Supply and Fixing LED street light fitting 60 Watt pressure die case aluminium housing LED street light luminaires suitable for existing street light pole including all fixing accessaries all as per specified and directed by Engineer-in-Charge.

S& fixing LED flood light luminarie 70 W 5000 K with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection all as specified and directed by Engineer-in-Charge

Supply and fix in replacement post top lantern LED 40 W or next highest wattage having IP65 protction for single phase connection 50 Hz 230 Volts all as specified and as directed at site.

Supply and fix in replacement LED bollard fitting 9 Watt with luminaire with MS Pipe housing with glare free PMMA diffuser , IP65 of height 800 mm suitable for single phase connection 50 Hz 230 Volts all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement of bulb LED with B22 base 9 Watt pin type or holder type of warm white complete all as specified and directed by Engineer-in-Charge

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories and all as specified and directed by Engineer-in-Charge

M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge .

M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out all as specified and directed by Engineer-in-Charge.

Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart all as specified and directed by Engineer-in-Charge.

Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed by Engineer-in-Charge.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-in-Charge.

M&L for sub class `B` bricks for cable protection all as specified and directed by Engineer-in-Charge.

Taking down/ out XLPE PVC insulated LT cable 1100 Volts grade from loose / hard soil / of any size all as specified and directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 6 sq. mm nominal cross section in service connections all as specified and directed by Engineer-in-Charge

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 10 Sqmm 4 core all as specified and directed by Engineer-in-Charge.

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 25 Sqmm 4 core all as specified and directed by Engineer-in-Charge.

M&L for 40mm dia of light grade GI pipe laid under road/floor/on pole for laying/fixing of cable all as specified and directed by Engineer-in-Charge

S&F syntex street light box with 3 phase aluminium bus bar including 6 Amps SP MCB with mounting /fixing acessories complete all as specified and directed by Enginer-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ XLPE, armoured, Al conductor cable of size 16 to 35 sqmm,Outdoor type all as specified and directed by Engineer-in-Charge

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ XLPE, armoured, Al conductor cable of size 70 to 95 sqmm,Outdoor type all as specified and directed by Engineer-in-Charge

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ XLPE, armoured, Al conductor cable of size 150 to 185 sqmm,Outdoor type all as specified and directed by Engineer-in-Charge

M&L danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for LT, 20x15 cm size all as specified and directed by Engineer-in-Charge

M&L for providing Display board of size 1m x 1m x1 cm madeup with acrylic sheet material consisting of matter as finalized by Engineer-in-Charge in Capital Letter at the Top complete with fixing arrangements to the wall all as specified and directed by Engineer-in-Charge

M&L, rewinding motor 5 HP - 7.5 HP 1400 RPM operating on 415 Volts, 3 phase 50 H AC supply for powering multi stage booster pump. The scope of work include dismantling of motor, cutting and removing the burnt winding cleaning the slots, rewinding with same size and turns of super enameled copper wire, taking out connections, tapping, varnishing backing and reassembling including replacement of UNSV parts such as nuts, bolts & washer etc inclduing testing on load all as specified and directed by Engineer-in-Charge

Taking down old GI pipes 20 mm to 50 mm dia all as specified and directed by Engineer-in-Charge

Supply and fix steel water tubing 40mm dia bore. medium grade galvanized including all fitting such as tees, bends, elbows redness, unions, clamps etc ISI marked laid in trench complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel water tubing 20 mm dia bore. medium grade galvanized including all fitting such as tees, bends, elbows redness, unions, clamps etc ISI marked laid in trench complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Gun metal gate valves 50 mm dia bore. ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for Iron pipe or union and fixed complete as specified and directed by Engineer -in-Charge at site.

Supply and fixing Gun metal gate valves 20 mm dia bore. ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for Iron pipe or union and fixed completely as specified and directed by Engineer -in-Charge at site.

Repair maintainance of HT VCB panel, detection of defective components, replacement of worn out parts and servicing/ cleaning of mechanical components, by the representative of authorized service contre of VCB Mfr's, Re insertion of trolly in HT panel, including calibration test ,relay test and testing for smooth operation complete as specified and directed by Engineer -in-Charge.Note:- Worn out parts shall be measured & paid separately as supply only under relevant items.

M&L for bringing cable Fault locator at site for locating the fault in Existing 11000 Volts HT cable as specified and directed by Engineer-in-Charge.

M&L for cable jinting kit for 11 KV (Earthed) grade cable for straight through heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 Sqmm complete as specified and directed by Engineer -in-Charge

M&L for cable jinting kit for 11 KV (Earthed) grade cable for indoor termination heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm complete as specified and directed by Engineer -in-Charge

S&F sheet metal enclosures DB Double door Verticle distribution type, 04 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete as specified and directed by Engineer -in-Charge Note : - MCCB shall be measured and paid separately

S&F sheet metal enclosures DB Double door distribution type, 04 way, TPN DB , IP43, 415V & suitable for 4 POLE MCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete as specified and directed by Engineer -in-Charge Note : - 4 pole MCB shall be measured and paid separately

S&F in replacement of MCCB TPN 125 Amps 415 Volts 16 KA as per suitable sample of size complete as specified and directed by Engineer -in-Charge

S&F in replacement of MCB TPN 100 Amps 415 Volts 16 KA as per suitable sample of size complete as specified and directed by Engineer -in-Charge

S/Fix in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete as specified and directed by Engineer -in-Charge

Supply & fixing in replacement of MCCB 63Amps 16KA complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCCB 160 Amps 4 pole 25 KA 415 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCCB 250 Amps 4 pole 36 KA 415 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCCB 315 Amps 4 pole 36 KA 415 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCB SP 6 t0 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB TPN 40 amps 415 Volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB 4 pole 63 Amps 415 Volt complete all as specified and directed by Engineer-in-Charge.

M&L for carefully dismantling Split AC of 2 TR and shifting and re-installation of existing split AC after servicing complete all as specified and as directed by Engineer-in-Charge

Repair , servicing & preventive maintenance of split type AC's of capacity 1.5 TR comprising of the following tasks installed at different locations including refixing, commissioning and testing complete all as specified and directed by Engineer-in-Charge.

M/L charging of refrigerant to refrigerator up to required capacity as per site condition complete as specified and directed by Engineer -in-Charge

Supply and fixing in replacement of starting capacitor 80-100/100-120 mfd for split type A/C's of capacity 1.5TR complete as specified and directed by Engineer -in-Charge

S/F in replacement of running capacitor 30/36 mfd for split type AC unit as required complete as specified and directed by Engineer -in-Charge

Taking down desert cooler of any size by disconnecting electrical supply, cleaning, oiling of all moving part of pump & exhaust fan/kit, Replacing PVC pipes, nozzles, distributors, pads, checking electrical connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of wood pads(set of three)as per sample all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement the new desert cooler pump including testing for proper functioning all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement the new exhaust fan motor kit 450mm sweep for desert cooler all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement new body of desert cooler as per sample duly painted of 20 SWG sheet with 22 SWG flops, front grill, PVC pipe, nozzle, distributor and nut bolts washers for fixing fan clamps, complete all as specified and directed by Engineer-in-Charge.

Taking down and rewinding of fan 400mm of desert cooler with super enameled copper winding wire including replacement of bush complete all as specified and directed by Engineer-in-Charge.

M&L painting of desert cooler with 2 coats of aluminium paint all as specified and directed by Engineer-in-Charge.

Supply and fixing front grill PVC of desert cooler as per sample complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement plug top 15 Amps all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC flexible copper wire 3 core of size 4 Sqmm complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan of any sweep from existing place and repair/replacement of UNSV items all as specified and directed by Engineer-in-Charge. Spare parts will be measured and paid separately.

M&L in replacement of defective shaft of ceiling fans including matching work for any make as per sample complete as specified and directed by Engineer -in-Charge

M&L in replacement of ball bearing for fans of various size all as specified and directed by Engineer-in-Charge.

Supply and fixing and connecting flexible copper twisted twin core of size 23/.00076 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing capacitor 2.00 Mfd. in replacement of old unsv item complete as specified and directed by Engineer -in-Charge

Supply and fixing capacitor 2.5 Mfd. in replacement of old unsv item complete as specified and directed by Engineer -in-Charge

M&L for rewinding of ceiling fan of any sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge

Taking down exhaust fans of any size as per details given below and cleaning the dust properly. Oiling, greasing of ball and bearing including re-fixing and connecting of all as specified and directed by Enginer-in-Charge.

M&L for rewinding of exhaust fan 250 mm to 300 mm sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of ball bearing of exhaust fan of any size complete all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan sweep 250 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete as specified and directed by Engineer -in-Charge

Supply and fix exhaust fan sweep 300 mm in replacement metallic type complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete as specified and directed by Engineer -in-Charge

Taking down carefully water heater (Geyser) any capacity any make after removing electric & water connections from existing system for carrying out repairs(Repairs will be measured and paid separately) and refixing the same after carrying out necessary repairs to original place complete as specified and directed by Engineer -in-Charge

Removing existing hot & cold water copper/PVC flexible pipe connection from geyser and S&F new brass chromium plated water connection pipe with brass nut and washers of good quality about 45cm long in hot & cold water connections and connecting complete as specified and directed by Engineer -in-Charge

Replacement of heating element 1.5 kW for 35ltrs capacity geyser ISI marked complete as specified and directed by Engineer -in-Charge

Replacement of thermo static switch of geyser complete as specified and directed by Engineer -in-Charge

Supply and fixing Fancy type Bib tap of cast copper alloy with crutch screwed down, screwed for iron pipe of 15mm bore complete as specified and directed by Engineer -in-Charge

Supply and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch screwed both ends for iron pipe or for unions of dia 15mm complete as specified and directed by Engineer -in-Charge

Cutting/drilling or taping from existing 15 or 20mm dia GI pipe in position for branch connection of 15mm dia including suitable fitting/fixtures complete as specified and directed by Engineer -in-Charge

Replacement of apparatus plate with nut, bolts, clamps, washer, etc. of geyser suitable for Record/Ditz make or any other make and any capacity including PRV & NRV system complete as specified and directed by Engineer -in-Charge

Welding with new brass studs for holding of heating element with replacement of suitable element holding clamps-3 nos complete as specified and directed by Engineer -in-Charge

Replacement of indicating bulb of geyser complete as specified and directed by Engineer -in-Charge

S&F in repairs apparatus plate bottom cover in two halves made out of GI sheet duly painted all as directed by Engineer-in-Charge.

S&F water heater outer cover suitable for 25ltrs. Capacity of existing make including taking out old unserviceable complete as specified and directed by Engineer -in-Charge

S& F geyser assembly including gasket and nuts and bolts complete with fixing arrangement complete as specified and directed by Engineer -in-Charge

S&F in replacement of water storage tank of suitable for 25ltrs capacity incl glass wool complete as specified and directed by Engineer -in-Charge

M& L for taking down and refixing light, fan, socket, bell or power point of any type and rating on any surface complete as specified and directed by Engineer -in-Charge

Taking down and refixing pressure pump motor of capacity upto 1 HP, single phase , 230 Volt complete as specified and directed by Engineer -in-Charge

Supplying and fixing PVC conduit 25 MM dia along with accessories in surface/recess I/C or cutting the wall and making good the same in case of recessed conduit as required complete as specified and directed by Engineer -in-Charge

S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete as specified and directed by Engineer -in-Charge

Supply and installation of PVC Duct 100 mm width For AC copper pipes and insulation complete as specified and directed by Engineer -in-Charge

S&F street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete as specified and directed by Engineer -in-Charge. Note :Brackets to be installed / grouted on wall or pole upto 11 mtr height.

M&L for scrapping of surface of LT Panels/Feeder piller of any size with emery paper and painting complete with one coat of primer and two coats of white colour paint from ground level complete all as specified and directed by Engineer-in-Charge.

M&L for scrapping of surface of steel tubular poles of any size with emery paper and painting of pole one coat of primer and two coats of silver colour paint including writing pole No on yellow colour with 30cm strip upto 1.5 Mtr height from ground level complete all as specified and directed by Engineer-in-Charge.

Dehyderation and filteration in cycles of transformer oil upto breaking capacity 45 KV is achieved and testing on load complete all as specified and directed by Engineer-in-Charge.

M&L for earthing with galvanised steel plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25mtr deep from ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32mmx6mm earth lead by means of nuts, bolts and washers incl excavation and earth work PCC chamber and RCC cover of 1:2:4 type B-1 using XPM weighing not less than 4 Kg/Sqmm using 20mm graded stone aggregate for coping/under covers, 20mm size GI pipe light grade for watering funnel wire mesh etc, complete as specified and directed by Engineer -in-Charge and shown in electrical plate No-03 of SSR Part-I.

SAGAR ENTERPRISES

VED PRAKASH ARORA

High Tech Metal India

M/S Yamin

Singh Associates