REPAIRS TO ROOF SHEETING, CEILING FLOORING, JOINERY AND CERTAIN MISC B/R WORKS IN THE AREA OF AGE BR-III UNDER GE (WEST) JABALPUR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete etc all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete etc all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

Taking down old shutters of any description not exc. 1 sqm each complete all as specified and directed.

Refixing of shutters including taking down easening and adjusting and also refixing hardware as required inlcuding renewal of unserviceable screws etc of any description n exc 1.0 sqm but n exc 2.0 sqm each, in same opening all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-2990 ( Gde E-165).

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S&F 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position . complete all as specified.

S&F factory made, 35mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick (batten thickness) 2 nd class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.20 (a) of MES SSR 1991 Part I)

S&F 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge.

S&F 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F aluminium anodised barrel tower bolts stove enameled with bright bolt length of bolt 125mm –ISI marked and fixed complete all as specified and directed

S&F aluminium anodised barrel tower bolts stove enameled with bright bolt length of bolt 200 mm –ISI marked and fixed complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projected type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

S&F, factory made steel windows with side hung shutter including projected type hinges with steel handle and steel peg stay, complete without glazing bars, ovetailed or welded etc complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) etc complete all as specified and directed

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified

S&F Coloured Vitriefied ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm laid and fixed on floor over and including 15mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

S&F Coloured Vitriefied ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm fixed on vertical surface such as dados/skirting over and including 15mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

S&F non skid tiles coloured 7 to 8mm thick , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ skirting fixed over and inlcuing 10mm thick backing coat in CM 1:4 including set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed.

S&F machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded fixed over and including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

S&F machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling timber in scantling 40Sqcm and over in section framed work in any position complete all as specified and directed.

M&L for rolled mild steel sections in rafters, purlins cross beam, hip and jack and posts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-410 (Gde E-250).

S & F mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nuts exc 5 cm and n exc 30 cm long, dia neck upto 10 mm dia .

S & F mild steel plate (plain or chequered) channels,square cut or notched (ordinary and counter sunk ) forming holes, with riveted,bolted or weleded attachement confirming to Fe- 290 (Gde E-165) complete all as specified and directed.

S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings etc all complete

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roof walls etc,fixed with L or J type hooks bolts etc all as specified and directed etc complete all as specified and directed.

Ditto all as per above items but fixing only

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws etc all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. Make :- ARMSTRONG AND EVEREST or other equivalent as approved.

M & L for 4 mm thick non asbestos fibre cement building boards,fixed or laid/inserted to timber/GI aluminium frame work with screw complete all as specified and as directed.

Dismantling timber fillets,posts rafter purlin under 40 sqcm in sectional area,complete all as specified and as directed.

S&F 2nd class H/W plain fillets square rectangular/triangular in section clean sawn secured with nails sectional area exc 13 sqcm but n exc 25 sqcm complete all as specified and as directed.

S&F 2nd class H/W plain fillets square rectangular/triangular in section wrought with nails sectional area exc 6 sqcm but n exc 13 sqcm complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 10mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even etc complete all as specified and directed.

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed.

M&L for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed.

M&L for preparation of wooden based surfacces of any description not otherwise desribed, not exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer surfaces complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in hold fast, bed block etc complete all as specified and directed

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth and treated with tar or coal tar black paint but treating small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc area not exc 0.10 sqm each.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth and treated with tar or coal tar black paint to ends of posts, backs of chowkats, etc area tarred exc 0.10 sqm but not exc 0.50 sqm each complete all as specified and directed.

Supply and fixing Sheet glass 5.5 mm thick, including fixing solar cantrol film 25mm micron reflective type ( gareware sun control or equivalent ) exc 0.5 sqm in each pane etc complete all as specified and as directed. Make of Glass : Modi Guard/Saint Gobin/Swastik

M&L for second class hardwood (SAL) scantling clean swan in unframed work as in raftar purlines etc all as specified and directed complete.

Ditto all as per above item but except timber complete.

Fixing only wind ties of flat iron etc all as specified and as directed.

M&L for preparation of wood and wood based materials, new or old ,of any decription and girth,not otherwise desribed, and treated with one coat of Creosote oil complete all as specified and as directed.

upadhyay Builders

RAVI ENTERPRISES

B G PANDEY AND BROTHERS

ANAMIKA CONSTRUCTION

Tiki Water proofing Co

M/s Om Infracon

mandeka constructions