REPAIR TO PCC FLOORING HARDSTANDING PAVEMENTS PLASTERING AND BRICK WORK IN LOWER LEIMKHONG MIL STN AND KOIRENGEI

Amount

Schedule 'A'

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone Agg) as in coping incl necessary formwork etc complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by the Engineer-in-Charge

M&L 100 mm thick plain cement concrete type B 1, 1:2:4 (using 20mm graded stone agg) as in flooring and finishing the cement concrete surface even and smooth without using extra cement with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed .

M&L for broken stone hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching , surface channels and drains complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed

M&L for RCC (Nominal Mix) Type B1, 1:2:4(using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) Type B1, 1:2:4 (using 20mm graded stone aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note :- Reinforcement and form work required shall be measured and paid seperately.

M&L for formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 14 above but 5mm dia and over upto includig 10mm dia in stirrups spacers complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

Ditto all as per Sl item No. 17.00 here-in-above but except brick (NOTE: Seviceable brick obtained from demolition under Sl item No 16.00 here-in-above shall be reused under the item)

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M & L for Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and evenwithout extra using cement complete all as specified and directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls for drain pipe complete all as specified and directed.

Dismantling floor, hearth , chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.

M&L for precast cement concrete chequred tiles (ISI approved) of size 300mm x300mm x25mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M&L for endura tiles (out door) 30cm x 30cm x 10 mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Preparation of old surfaces of concrete of any description over 10cm girth or width, not otherwise described apply one coat of synthetic enamel paint all as per directed by Engr-in-Charge.

M&L for 300mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars including demolition of existing pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded broken stone agg) as in bed in drain pipe 300mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed.

MANI PRASAD GUPTA

M/S PRADEEP CONSTRUCTION

M/s Nongmaithem Construction

M/s CYBER DEN

M/S Apple constructions

Manipur Steel Industries(INDIA)