Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.5 CrAccepted-AOC | ₹1.5 Cr Quoted ₹1.6 Cr | 1 | Accepted-AOC LOWEST TENDER |
| 2 | 2₹1.6 Cr+₹8.9 L (5.71%)Rejected-Finance RZ 31 222 J BLOCK WEST SAGARPUR NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | ₹1.6 Cr+₹8.9 L (5.71%) | 2 | Rejected-Finance Not being lowest |
| 3 | 3₹1.7 Cr+₹16.4 L (10.5%)Rejected-Finance 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | ₹1.7 Cr+₹16.4 L (10.5%) | 3 | Rejected-Finance Not being lowest |
| 4 | 4₹1.7 Cr+₹19.2 L (12.3%)Rejected-Finance A 212B GALI NO 1 SHAKARPUR | DELHI | EAST DELHI | DELHI | 110092 | ₹1.7 Cr+₹19.2 L (12.3%) | 4 | Rejected-Finance Not being lowest |
Tender Value
₹1.8 Cr
EMD Value
₹2.6 L
Closing Date
10 Oct 2020, 6:00 pmClosed
CHIEF ENGINEER DELHI ZONE
HQ CE DELHI ZONE DELHI CANTT-10
ADDN/ATLTN AND SPECIAL REPAIR TO JCO/OR ACCN BLDG NO P-2,P-3, P-4, P-41 (MANDIR) AND P-42 (GURUDWARA) WITH SEWAGE LINE OF IHQ OF MOD (ARMY) CAMP UNDER GE (SOUTH) DELHI CANTT-10
2020_MES_357163_1
CEDZ-08 OF 2020-2021
Open Tender
Civil Works
Item Rate
395 days
DELHI CANTT
MES contractor enlisted in MES under class B cat a i having deposited Standing Security of Rs 4.00 lakh with department. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
9 documents required · 9 mandatory
₹1,000
GE SOUTH DELHI CANTT
₹2.6 L
Yes
26 Nov 2020
30 Jun 2020
12 Oct 2020
30 Jun 2020
10 Oct 2020
25 Sept 2020
Amount
B/R Portion
Item No 1 Taking down door chowkhat's or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed
Item No 2 Taking down steel window chowkhats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed
Item No 3 Taking down steel window / ventilators chowkhats or frames with shutters n. exc 1.5 sqm each complete all as specified and directed
Item No 4 Taking down PVC Door chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed
Item No 5 S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per drawings and specifications complete all as directed
Item No 6 S& F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as directed
Item No 7 S&F factory made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed
Item No 8 S&F factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Item No 9 S&F 38 mm size stainless steel piano hinges AISI -304 grade complete all as specified and directed.
Item No 10 S&F butt hinges, medium weight 100 mm, stainless steel AISI-304 grade with stainless steel screws complete all as specified and directed
Item No 11 S&F Stainless Steel Sliding door bolts 300mm long clip type AISI 304 grade with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed complete all as specified and directed
Item No 12 S&F stainlesss steeel tower bolts of AISI 304 grade 200mm long with stainless steel screws complete all as specified and directed.
Item No 13 S&F stainless steel handles of AISI 304 grade 125mm size with stainless steel screws complete all as specified and directed
Item No 14 S&F stainless steel barrel tower bolt of AISI 304 grade 150mm long with stainless steel screws complete all as specified and directed.
Item No 15 S&F 100mm size stainless steel handle of AISI 304 grade with stainless steel screws complete all as specified and directed.
Item No 16 S&F brass Hat and coat hook solid body 175 mm to 250 mm long complete all as specified and directed
Item No 17 S&F mild steel frame work as in door or gates of angle or other section conforming to Fe 410W (Gde E-250) quality B conmplete all as specified. and directed.
Item No 18 S&F MS work as in hold fasts conforming to Fe 290 Gde E-165
Item No 19 M& L for cutting holes in brick wall built in CM for inserting hold fast to a depth exc half brick but n.exc one brick and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-0 as required.
Item No 20 S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Item No 21 M&L applying 2 coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth including preparation of surface
Item No 22 S&F fabricated aluminium door with shutter powder coated (minimum thickness 50 micron) , chowkats /frame made with aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top / middle / bottom rail of shutter with sections 112 x 44 x 2mm thick including 5 mm thick tinded glass panes , iserted including necessary fixing arrangement ,jointing cleats ,glazing clips , rubber packing aluminium anodised beading screw sets floor hinges tower bolts 200 mm size, mortice lock 100 mm size 4 lever , round handles etc , fitted to shutter and frames fixed in positon with aluminium hold fast of size 25 x 3 mm flat , 150 mm long , 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing surfaces complte all as specified and directed.
Item No 24 S&F fabricated aluminium window with powder coated (minimum thickness of powder coating 50 micron) aluminium frame of section 63.5 mm x38.1mmx1.5 mm thick, shutter with section 47.62 mmx44.45mmx1.5mm thick including aluminium anodized "D" Handle of size 150 mm long and each shutter having one handle and 03 Nos of hinges of size 100 mm , each shutter having 01 peg stay, 150 mm long tower bolt each shutter having 02 Nos etc including jointing cleats for fixing builder's hardware fittings and and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples including necessary fittings/fixture/aluminium snap beads complete all as specified and directed. Note for item 23 & 24 :- Measurement shall be taken for clear opening ie out to out of window frame as a whole including all fittings and fixtures and nothing extra shall be paid seperately.
Item No 25 S& F Aluminium powder coated Grill (DECO grill DG 103 of 7.5 mm thick of M/s ELESAR , M/S Royal Grill , M/S National Grill Associated profiles & Aluminium Ltd ) fixed with suitable 'F' Section (No 8584) 15.30 X23.40X 1.40 mm (minimum ) , fabricated and riveted to aluminium window / ventilators complete all as specified and directed .
Item No 26 Dismantling of stone sett paving of any description laid , bedded and pointed in any type of mortar etc.
Item No 27 M&L for 20mm thick black granite pre-polished ( of any type ) work table rubbed and polished over shelves and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade over and including 20mm thick cement screed in CM 1:6 complete all as specified and directed
Item No 28 Dismantling boarding any description fixed in any position with screws.
Item No 29 M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of density 600/cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 02 Nos of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos of screw to be provided horizontal member etc complete all as specified and directed.
Item No 30 M&L for factory made PVC flush type shutter of 18mm thickness consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm metred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The thickness of the shutter is edge lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc including necessary fittings, locking and fixing arranmgement ie piano hinges, locking and fixing arrangement etc complete all as specified and directed and as per manufacturer's specification and drawing
Item No 31 S&F hasp and staple stainless steel of AISI 304 grade size 125mm
Item No 32 S&F stainless steel floor door stopper with rubber shoe of AISI 304 grade complete all as specified and as directed.
Item No 33 Demolition of brick work built in cement mortar including all quions arches pillars etc.
Item No 34 M&L brick work built in cement mortar (1:4) using sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radious as in repairing of existing drains/manholes.
Item No 35 M&L cleaning sunken portion of slab (bottom and sides) and providing water proofing treatment as under :- (a) Provididng minimum 75 mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate and mixed with WPC complast x 421 IC cement slurry admixed with bonding compound nitobond AR to be used for bonding of coving with RCC member laying mm bore spout pipe, sloping and covering CI pipes with PCC 1:2:4 type BO (using 12.5 mm graded stone aggregate) admixed with integral WPC complast x 421IC (Fosroc chemicals India Ltd) (b) Drilling 50 mm deep holes(bottom and sides) at a distance of one metre centre to centre and cleaned with water anbd air, fixing nozzles of 20 mm dia on drilled holes, injecting non shrink cement slurry at a pressure 50 Mpa and nipples plugged with quick setting WPC. (c) Applying 2 ful coats of brush bond acrylic emulsion based elastomeric (bottom and sides water proofing coating after the primer with a minimum time gap 4 to 6 hrs betwwn Ist and 2nd coat. (d) Rendering 15 mm thick plaster (sides& bottom) in CM 1:4 admixed with WPC complast x421 IC complete all as specified and directed. Note;- (i) Floor area not exc 3.5 sqm and wall area not exc 4 sqm of each Sunken.(ii) Sunken portion treatment is to be done by approved applicator of manufacturer and Contractor shall stand Guarantee to the Government for a period of 10 years from the certified date of completion of the work. The Contractor shall furnish a written guarantee for the effectiveness of the treatment for a period of ten years in fovour of GE. The amount of security deposit against the guarantee for sunken treatment shall be calculated as per the scales laid down for calculating the ISD on the amount of water proofing treatment of sunken portion at contrat rates rounded off next rupee.
Item No 36 Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed.
Item No 37 M&L for Vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed.
Item No 38 M&L machine cut kota stone slab flooring (size 22"x22" in flooring and full length in steps of staircase) 20-22 mm thick (minimum thickness 20 mm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6.complete all as specified and directed.
Item No39 M&L kota stone slab 20-22 mm thick(minimum thickness 20 mm) in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
Item No 40 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Item No 41 M/L non skid coloured ceramic tiles 7 to 8 mm thick Square or ractangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match even and including 15mm thick screed bed or bedding layer in CM 1:6 etc
Item No 42 Material and labour glazed ceramic coloured high lighter tiles size 300x450mm 6 mm to 7 mm thick in walls etc set and jointed in neat cement slurry and pointing in coloured cement over 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed
Item No 43 S&F in repair Vitreous China, pedestal pattern wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pipe & drain pipe (or out goingpipe) and to flushing pipe, anti-syphonage pipe,& S or P trap etc complete all as specified.
Item No 44 S&F in repair plastic water closet seat cover white, closed pattern ( seat & cover for Pedestal pattern) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified.
Item No 45 S&F 75 mm magnetic catcher with brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-Charge
Item No 46 Supply and fixing in repairs vitreous china ware wash hand basins, white flat size 550x400mm excluding taps but including CP waste 32mm coupling and brackets complete all as specified and directed.
Item No 47 Supply and fixing in repairs PVC valve less syphonic double action type (dual type) flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any all as specified.
Item No 49 S&F in repairs 15 mm bore fancy type chromium plated angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe.
Item No 50 S&F in repairs 15 mm bore fancy type chromium plated with long shank and cup (concealed type ) stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe.
Item No 51 S&F in repairs 15mm bore brass chromium plated long body fancy bib taps high pressure screwed for iron pipe and fixed.
Item No 52 Supply and fixing in repairs PVC connection 15mm dia and 45cm long with washers complete all as directed.
Item No 53 Supply and fixing in repairs 32mm dia and 61 cm long PVC waste pipe for WHB complete all as directed
Item No 54 Supply and fixing in repairs CP brass shower rose of size of 100 mm dia fixed to 15mm pipe of revolving type all as specified.
Item No 55 Supply and fixing in repair brass chromium plated fancy pillar taps 15 mm, screwed down high pressure, screwed for iron pipe and fixed.
Item No 56 S&F in repairs Cast iron floor trap with CP grating including jointing to waste pipe in run lead, dia of outlet 75 mm in cement concrete type B1 (1:2:4) complete all as specified.
Item No 57 Supply and fixing in repair tubular towel rail brass chromium plated, 20mm dia, ‘D’ type 60cm long between flanges all as specified.
Item No 58 S&F in repairs 6 mm thick glass corner shelf (Single shelf) of best quility with CP steel railing of size (250mmx250mm) of best quality complete allas specified
Item No 59 S&F in repair CP health faucet with hand shower and 1.5 mtr flexible stainless steel pipe suitable for fixing to 15 mm dia pipe complete.
Item No 60 Taking down of CI pipes set in Cement Mortar upto 100 mm dia
Item No 61 S/F 100 mm bore CI soil waste and vent pipe (Sand Cast) in any length with or without ears with connecting joints laid in trenches or in floor or fixed to walls.
Item No 62 Ditto - all as per Ser item No 61 above but 75 mm bore
Item No 63 S&F in repairs 100 mm bore CI bends (any radius) diminishing pieces or taper (large base measured).
Item No 64 Ditto - all as per Ser item No 63 here-in-before but for 75mm bore pipe .
Item No 65 100mm cast iron sanitary connection `P' branch, with branch 370 to 450mm long excusing joint complete all as specified and directed
Item No 66 S&F in repairs CI cowls of size 100 mm.
Item No 67 S&F in repairs CI 75 mm Nahani trap with grating incl jointing to waste pipe fixed in cement concrete.
Item No 68 S/F in repairs CI branch piece single (equal or unequal) 100 mm bore ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed
Item No 69 ditto- all as per item No 68 here-in-before but 75 mm bore
Item No 70 S&F 100 mm bore dia cast iron branches pieces( tee,cross & 'Y' shapes) & oval access doors ,with cement joint, fixed on walls upto 4 storey building height complete all as specified.
Item No 71 S&F 75 mm bore dia cast iron branches pieces( tee,cross & 'Y' shapes) & oval access doors with cement joint, fixed on walls complete all as specified.
Item No 72 S/F in repair 100 mm dia with holder bat clamps made out of 50 mm by 5mm flat iron and 16mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof.
Item No 73 -ditto- as per item No 72 here in before but 75 mm dia
Item No 74 Taking up or down 15mm bore GI tubing and connection including cleaning for refixing or removal to store.
Item No 75 -ditto-all as per item No 74 above but 20mm bore
Item No 76 S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore.
Item No 77 '-ditto- all as per item No 76 here in before but 20 mm bore pipe.
Item No 78 Refixing old steel tubing and connections 15mm bore in new or old position ( wall,ceiling,floors,etc)
Item No 79 - ditto-all as per item No 78 here in before but 20 mm bore pipe.
Item No 80 Dismantling PVC water tanks exc.500 litre & nexc.1000 litre and removing to store
Item No 81 S & F of 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layer hoisted and fixed in position all as specified.
Item No 82 S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Min wt 210 gms/) complete all as specified and directed
Item No 83 S&F in repairs 15mm bore gun metal gate valves with iron wheel head and brass spindle, screwed both ends to iron pipe and fixed all as specified.
Item No 84 Demolition of lime concrete or cement concrete including tilling etc in ground floors and pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.
Item No 85 M/L 75 mm thick. PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in plinth protection finished even & fair
Item No 86 M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A'
Item No 87 Supply and fixing in repairs 25mm dia, mild steel, powder coated drapery rod with fixing brackets stops, side knobs etc complete all as specified.
Item No 88 M&L for Providing precast cement concrete louvers and jalli 50mm thick in 1:2:4 type B-0 (measured soplid) incl all moulding but excluding frame set in CM 1:4 complete all as specified and directed
Item No 89 Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling.
Item No 90 M&L 15 mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement
Item No 91 M/L 15mm thick rendering in CM 1:4 on other than fair faces of brick walls or concrete surfaces finished even and fair
Item No 92 M/L 5 thick rendering in CM 1:3 of ceiling finished even and smooth without using extra cement.
Item No 93 M&L applying 3 coat of white wash on walls including preparation of newly plastered surface complete all as specified and directed
Item No 94 M&L applying 3 coat of white wash on ceiling including preparation of surface over newly plastered surface
Item No 95 M&L for preparing of new surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding arrangement, trestles, ladders etc all as specified and directed.
Item No 96 M&L for preparing of new surfaces of walls and applying two coats of oil emulsion distemper white or tinted over a coat of primer with and including 1-2 mm thick wall care putty including scaffolding arrangement, trestles, ladders etc all as specified and directed.
Item No 97 M&L for complete removal of existing treatment from walls and applying three coats of white wash complete all as specified and directed.
Item No 98 M/L for complete removal of existing treatment from ceiling and applying three coats of white wash complete all as specified.
Item No 99 M&L for complete removal of existing treatment from walls and applying two coats of oil emulsion distemper white or tinted over a coat of primer with and including 1-2 mm thick wall care putty including scaffolding arrangement, trestles, ladders etc all as specified and directed.
Item No 100 M&L for complete removal of old surface of walls and applying two coats of cement base paint over a coat of primer including scaffolding arrangement, trestles, ladders etc all as specified and directed.
Item No 101 M/L applying one coat of synthetic enamle paint over old decorated wood or wood based surfaces incl preparation.
Item No 102 -ditto- as per item No 101 here in before but on steel surfaces incl preparation.
Item No 103 Dismantling Brick tiles or terracing tiles single layer on roofs and removal from site complete all as specified and directed
Item No 104 Demolition of mud in roofs any thickness including plastering and leaping and removal from site upto a distance of 10 KM out of MoD land and deposited as directed by Engr-in-Charge
Item No 105 M & L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface after preparing, cleaning the surface with wire brush using water complete all as specified and directed.
Item No 106 M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding for providing required slope finishing surface even and smooth using extra cement complete all as specified and directed .
Item No 107 M & L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed (Water proofing compound shall be measured and paid seperately).
Item No 108 S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/sqm and 3mm thick reinforced with polyster non woven fabric ( weight not less than 150 gms/sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm by torch application including cleaning of surface complete all as per approved manufacturer,s instructions Note The water proofing treatment shall be got carried out by manufacturer or their auth applicators complete all as specified.
Item No 109 Supply only water proofing compound.
Item No 110 S/F in repair 150mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps.
Item No 111 S&F in repair UPVC (SWR) bends any radius 150mm bore fixed to UPVC pipes complete all as specified and directed by Engineer in Charge.
Item No 112 S&F in repair MS clamp made out of 25X3mm suitable for 150mm bore pipe includin fixing to wall with PCC 1:2:4 type B1 of size 150x150x150mm complete all as specified and directed
Item No 113 M & L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs incl. removing of small tree shrubs etc. complete all as specified and directed
Item No 114 All as per Ser item No 112 here-in-before but thickness of gunite exc. 25mm but n.exc 40mm (average thickness) -ditto-
Item No 115 M & L for 100mm thick cement concrete type C -2, 1:3:6 using 40mm graded stone aggregate as in subbase complete all as specified and directed
Item No 116 M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed
Item No 117 M&L for machine pressed precast concrete irubber moulded colour interlocking paver block block any shape and size conoirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed
Item No 118 M & L PCC ( 1 : 2 : 4) type B-1 usiong 20 mm graded crushed stone aggregate as in kerbs, coping, paddings etc including necessary form work all as specified and directed.
Item No 119 Dismantling Asbestos cement (corrugated or semicorrugated, etc.) sheets in roof coverings complete all as specified and directed
Item No 120 S&F Pre-Painted galvanlume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and ddirected
Item No 121 Dismantling mild steel Work of any description fixed in any position not otherwise provided for complete all as specified and directed.
Item No 122 Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m & making good surface complete all as specified and directed.
Item No 123 S&F Mild steel framed work using angle iron ,flat iron fillet etc including necessary cutting,drilling,welding as required complete all as spd and directed.
Item No 124 M&L fpr Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Item No 125 M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate ) as in foundation for embedding of M S tubular pole.
Item No 126 Excavation in trenches in soft/loose soil, not exc 1.5m wide & not exceeding 1.5 metre in depth and getting out complete all as specified & directed.
Item No 127 M&L for salt glazed stoneware drain pipes 150 mm bore, Gde 'A' laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed.
Item No 128 M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed
Item No 129 Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as directed.
Item No 130 M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified.
Item No 131 M&L plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified and directed.
Item No 132 S&F of precast RCC polymer concrete, M-30 grade of concrete by using nylon fibers, with 10 Nos of round hole on each drain cover, of size 1000mm x 500mm & 70mm thick, manufactured by using jointless FRP moulds and casted by vibro compaction process, drain cover reinforced with 8mm diaTMT mild steel bars @ 100mm c/c both bays, set on drain as cover slab complete all as specified and as directed by Engineer-in-Charge. Make of SFRC Manhole/drain cover and frame shall be M/s Kreative Concrete, Plot No-61/20, Palli Industrial Area, Faridabad/ M/s KK Manholes & Grating Co. Pvt Ltd, 12/16, Sarvapriya Vihar, New Delhi.
Item No 133 S&F precast RCC polymer concrete, M-30 grade of concrete by using nylon fibers, Gully trap cover with frames of size 450mm x 450mm x 50mm thick set in cement mortar (1:6), manufactured by using jointless FRP moulds and casted by vibro compaction process, drain cover reinforced with 8mm dia TMT mild steel bars @ 100mm c/c both bays, set on drain as cover slab complete all as specified and directed by Engineer-in-Charge. Note : Make of SFRC Manhole/drain cover and frame shall be M/s Kreative Concrete, Plot No - 61/50, Palli Industrial Area Faridabad/ M/s KK Manholes & Grating Co. Pvt Ltd, 12/16, Sarvapriya Vihar, New Delhi. (Contractor will provide manufactuerer test certificate of Gully Trap cover & frame).
Item No 134 Removing of excavated materials soils n.exc 50 m and deposited where directed at a level n.exc 1.50 m above the starting point
E/M Portion
Item No 135 Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) including steel terminal boxes such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete.
Item No 136 M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including concealed existing PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following : Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. Note : New conduit of suitable size with connected fittings will be laid, if there is damage/blockage in existing conduit at the rates quoted are deemed to be included and nothing extra shall be payble at later stage. Bidder to note this aspect while quoting the rates.
(a) One light /fan/Bell point controlled by one way switch
(b) One 3 pin socket outlet 5 amps independent board
(c) One 3 pin socket outlet 5 amps point on same board
(d) One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.
(e) One 3 pin socket outlet/sheet metal enclosuere with MCB SP of 20 Amp, an independent with cable 4 Sqmm for main current and 4 sqmm as earth wire as power point.
Item No 137 S&F Switch piano, flush type 5 Amps single pole one way, ISI marked
Item No 138 S&F socket outlet 2 in 1, 3 pins 5 Amps single pole one way, ISI marked
Item No 139 S&F in replacement switch piano, flush type 15 Amps single pole one way, ISI marked
Item No 140 S&F in replacement socket outlet 2 in 1, 3 Pin , 15 Amps flush type ISI marked
Item No 141 S&F in replacement ceiling rose surface Bakelite 60x 25 mm three terminals, ISI marked
Item No 142 S&F ceiling fan regulator electronic socket type.
Item No 143 S&F in replacement of ceiling surface mounting in round/square shape LED downlighter with durable housing with aluminium heat shrink with diffuser to give glare free light with removable driver 12 Watt LED 6000K lamp type in replacement of old unsv existing CFL fitting any type from ceiling of stairs/common areas, complete all as specified and directed.
Item No 144 S&F LED Integrated Batten aesthetically designed linear mirror LED light fitting of 07 Watt 1' white, indoor decorative PVC extruded provided with a high output PMMA diffuser for glare free light LED battern integrated type complete with including fliexble wire all as specified and directed in replacement of old unsv existing any type mirror light normal fitting
Item No 145 S&F in replacement LED post top lantern fitting with die cast aluminium spigot, spun aluminum powder coated top cover Aluminum PDC heat sink opal PC diffuser clear acrylic IP-65 with 25 Watt power including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete including making a hole in pillar/wall with light grade GI pipe of suitable size for fixing the post top lanter fitting complete all as specified and directed at site
Item No 146 S&F in replacement LED Cone-IP65 (spike as path light fitting) of 8 Watt with die cast aluminium powder coated top cover Aluminum powder coated, heat sink with diffuser including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete including making a masonary block for suitable size and grouting into block and screwing a base of light fitting in masonary block for proper fixing complete all as specified and directed.
Item No 147 S&F in replacement RUGBY Bulkhead suitable for LED 12 Watt of Base B22, Bulk head in die cast aluminium housing & frosted glass including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete.
Item No 148 S&F in replacement for wall mounting fitting (Apple-12W) made up of Polycarbonate, suitable for 12 Watt CFL / LED decorative wall light fixture including necessary electrical connection with suitable size of copper PVC wire from switch board to light fitting complete all as specified and directed.
Item No 149 S & F LED Integrated Batten T5, 20 Watt, 4 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type complete with including fliexble wire all as specified and directed in replacement of old unsv existing 36 Watt tube light fitting,.
Item No 150 S&F LED Building security light fitting 45 Watt on in replacement of old unsv existing security light fitting any type including bracket for fixing of security light fitting of GI pipe light grade of 32/40 mm dia with suitable size of clamps, anchor faster, nut bolts and washer complete all as directed.
Item No 151 S & F LED RETROFIT lamp of 12 Watt for surface mounting fiiting/wall mtg light fitting or batten holder all as specifed and directed by Engr-in-Charge
Item No 152 S&F in replacement MCB DB SPN 12 Way double door type, (IP 43 Protection) flush mounting for MCBs
Item No 153 S&F in replacement MCB SPN 32/40 AMP C curve
Item No 154 S&F in replacement MCB SP 6 to 40 AMP C curve
Item No 155 S&F in replacement MCB TPN/Isolator 4 Pole from 63/100 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make.
Item No 156 M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade on and inclding PVC conduit 25 mm medium grade complete with conduit accessories and copper cable 6 Sqmm continuous earth wire complete all as specified and directed (Two runs of cable with 01 earth wire shall be measured as one length) Note:- the rate is inclusive of taking down old submain wiring, making good the disturbed surface and same surface finishes with the adjoining surface of disturbed area ie with OBD/colour wash/white wash and wall putty where ever required.
Item No 157 M&L for submain wiring of two runs of 10 Sqmm size for main cable and one run of 10 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through suitable size of concealed PVC conduit with all fittings such as tees, bends, Junction/terminal boxes etc all as per site requirement complete all as specified and directed
Item No 158 S&F in replacement of distribution board V-TPN 4 way for fixing MCCB up to 125 Amps as incomer and MCBs as out goings with metal door and IP 43 Protections and connecting complete all as specified and directed
Item No 159 S&F in replacement MCCB 125 Amp, 415V, 4 Pole, 36 KA
Item No 160 Taking down of old unserviceable ceiling fan/exhaust fan and dismantling of blades and cleaning or dusting the blades and bearing assembly properly and deposit to MES yard/store complete all as specified and directed at site.
Item No 161 S&F in replacement of Ceiling Fan 1200 mm sweep with 5 star rated and copper wound in white colour complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size of Cat Part No : ES-50 of Havells or equivalent.
Item No 162 Supply and fixing metal body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size including cutting hole of appropriate size as per size of exhaust fan with necessary civil and PCC works and making good the disturbed surface of wall with OBD/White wash to match with existing surface complete all as specified and directed.
Item No 163 Supply and fixing in replacement of metal body exhaust fan 450 mm sweep, 230 Volts with louver 1400 RPM and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with existing complete all as specified and directed.
Item No 164 M&L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground in ground (earth pit plate kess than 2.5 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts anad washers ofgalvanised iron or steel all as shown in Electrical Plate No 03 connecting to to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade with funnel and locking arrangement all as specified and directed .
Item No 165 M & L Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire.
Item No 166 S&F in replacement for Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap.
Item No 167 S&F in replacement of Metal clad plug and socket 20 Amps with MCB SP and steel enclosure .
M/S Chhavi Constructions Co
V r traders
VED PRAKASH ARORA
Bidder Name
V r traders
VED PRAKASH ARORA
M/S Chhavi Constructions Co
India Guniting Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .