Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹49.2 L+₹8.7 L (21.6%)Rejected-AOC GALA NO 08 D SOUZA SADAN OPP ANULAXMI ART PRINTERS NEAR GANESH MANDIR LOKMANAYA TILAK NAGAR A G LINK ROAD SAKINAKA MUMBAI 400 072 | MUMBAI SUBURBAN | MAHARASHTRA | 400072 | L2 | Rejected-AOC Not Accepted |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NORTH MUMBAI
Garrison Engineer North Mumbai Military Engineer Services Santacruz East, MumbaI 400029
Repairs to MAP md accn at KMC under GE North Mumbai.
2022_MES_561544_1
8109/E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH MUMBAI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER NORTH MUMBAI
₹90,000
Yes
14 Dec 2022
4 Nov 2022
5 Dec 2022
4 Nov 2022
3 Dec 2022
19 Nov 2022
5 Nov 2022 - 18 Nov 2022
Amount
Taking down chowkats or frame with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site complete all as specified and as directed by Engineer-in-Charge.
Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4 sqm with shutters (without taking off shutters from the frames) including all fittings & removing clear off site complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including fittings & removing clear off site complete all as specified and as directed by Engineer-in-Charge.
Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side all as specified and as directed. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Material and labour for Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: Greenply / Kitply / Century Plywood / Associates Decor Ltd
Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and as directed by Engineer-in-Charge.
Material and labour for IInd class hardwood plain fillets square, rectangular or triangular in section exceeding 6 Sqcm but not exceeding 13 Sqcm, clean sawn, secured with nails or brads all as specified and as directed by Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed by Engineer-in-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engineer-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion
Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.
Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix Stainless steel butt hinges medium weight of size 100mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix Stainless steel butt hinges medium weight of size125mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix in repair extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles
All as per item No.21 described here-in-before but as in vertical surfaces such as skirting etc including 10mm thick backing coat in cement mortar 1:3
Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles
Material and labour for 25mm thick cement concrete nominal mix 1:2:4 (using 20mm graded stone aggregate) type B-1 as in sub base, floor, pavings etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for chemical injection of (chlorpyrifos 20EC) diluted emulsion shall be used for post construction Anti-termite Treatment Treating to the soil along with internal / external wall below concrete or masonry including drilling 12mm dia holes shall be drilled at a downward angle of about 45 degree and 300mm deep preferably from both sides of the plinth wall / internal wall at approximately 300mm intervals and emulsion of 0.75 litre per hole shall be squirted through these hole to soak the masonry using a hand operated pressure pump with and plugging hole with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for 10 mm thick plastering in cement mortar (1:6) on internal wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding upto the height of building with all safety precautions etc complete all as specified and as directed by Engineer-in-Charge. Note: WPC will be measured and paid separately.
Material and labour for 5 mm thick plastering in cement mortar (1:3) on internal ceiling surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit
Material and labour for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 1.5mm thick wall care putty on internal wall surfaces complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered internal surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer in Charge. Make: M/s SHALIMAR / M/s BERGER / M/s NEROLAC /M/s ASIAN (Tractor Brand)
Material and labour for preparation of new plastered wall surfaces and applying two coats of Acrylic weather proof coat 100% exterior grade paint @ 1.67 litre per 10 Sqm over acrylic primer (Exterior) @ 2.2 Kg per 10 Sqm etc complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints
Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Deluxe
Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
All as per item No.40 described here-in- before but 20 mm bore complete all as specified and as directed by Engineer-in-Charge
Dismantling of 110mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
Dismantling of 75mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix UPVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex
Supply and fix UPVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex
Supply and fix UPVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix UPVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 750 ltrs capacity with inlet & outlet connections, tank nipple(minimum weight 25mm - 65 gms) 25mm bore dia, bends, sockets etc, hoisted and fixed in position including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex
Supply and fix in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 25mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM
Supply and fix framed work such as grills, gratings, barred iron doors, ladders, brackets of chajjas etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 all as specified and as per directed by Engineer-in-Charge.
Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in Chajja covering, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction including necessary scaffolding upto the height of building with all safety precautions etc complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux
Taking down existing water proofing treatment including cleaning of roof surfaces with wire brushes etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for flexible single compound, liquid applied, pure polyurethane water proofing membranes ECMACOAT FLEX PU 40 ( single compound, self levelling, thixotropic , self curing solvent based, bitumen/ tar free, PURE POLYURETHANE based liquid applied membranes having minimum solid contents >93 %, VOC less than 70gms/ ltr, elongation > 550 % and tensile strength > 2.50 mpa with minimum crack bridging of 2.5mm , to be applied by brush or roller or spraying in two coats to achieve 1.2mm ( DFT) @ 1.5 Kg / Sqm, water proofing membranes to be terminated on parapet wall in a V groove of size 25 x 25mm atleast 300mm above FFL, which should be sealed with polymer mortar, before application ECMACOAT FLEX PU 40, surface should be primed with ECMACOAT PUPRIME @ 200 gms / sqm, quoted rates should be including cleaning of mother concrete surface to remove dust loosely adhering particles, oiling grease, etc completely using suitable means, making of corner fillets 50mm and repairing wall cracks & construction joints by cutting and filling with ECMAS polymer modified mortar, providing and laying 150 GSM Geo textile layer over the water proofing coating for protection of membranes, laying protective screed (average 50mm thickness) of M-20 grade RMX concrete admixture with integral water proofing Ecma guard WPL & Polypropylene fibres @ 0.90 Kg /cum to be laid in proper slope towards beam with minimum thickness of 50mm on horizontal surface and 15mm thick rich cement sand (1:4) plaster admixture with integral water proofing compound on vertical surfaces including necessary scaffolding upto the height of building with all safety precautions etc all as specified and as directed by manufacturer and as directed by Engineer-in-Charge. Make- ECMAS
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.
Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (not less than 20mm wide) or 20mm dia non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable switch / socket outlet shall be reused.
One light / Fan / Exhaust fan / bell point controlled by one, one way switch
One 3 pin 5/6 Amps switch socket outlet combination point on independent board.
One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.
All as per item No 59 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.
Material and labour for point wiring with two 1.5 sqmm FRLS grade PVC insulated cable 1100 volts grade as per IS-694 stranded copper conductor cable drawn through and including in PVC conduit concealed complete with all fittings and accessories and 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated for earth continuity including cutting chases on wall/floor etc. not exc 10 cm girth and making good the disturbed surfaces of wall with cement mortar 1:3 all as specified and directed for one light / Fan/bell/Exhaust fan Point controlled by one switch, one MS pressed 1.6 mm thick terminal box with 3 mm thick hylam sheet ISI marked top cover with brass screws and cup washers for housing switches, socket outlets, fan, regulators etc, all as specified and as directed by Engineer-in-charge.” Note: Serviceable switch / socket outlet shall be reused.
One light / Fan / Exhaust fan / bell point controlled by one, one way switch
One 3 pin 5/6 Amps switch socket outlet combination point on independent board.
One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.
All as per item No 61 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.
Supply and fix in repairs, batten type LED tube light fitting, 1x20 watts, 230 volt, 4 feet with long lasting all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXARP7SN1W020 or equivalent in Bajaj / CG / Phillips
Supply and fix in repairs surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver of 2 feet 10 watts with necessary electric wiring all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0. 20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXACP7IN1W010 or equivalent in Bajaj / CG / Phillips
Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Havells
Supply and fix Switch bell push, flush type, single pole, one way, 5/6 Amps, 230 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T
Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T
Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix switch socket outlet, combination 5 Pin 5Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix socket outlet, combination 5 in 1, 3 Pin, 5/15Amps, flush type 240 volts, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Note: Deduct Credit for demolished / dismantled material of Rs. (-) 61,135.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
joshua construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .