OT-50

Amount

Dismantling of RCC floor and removal of debris away from the site, including cost of all materials, labour charges, lead, T&P, lift etc., complete and as directed by Engineer incharge at site.

Brick work in CM 1:4 using fly ash bricks as directed by the Engineer in charge including cost of all materials, labour charges, curing, lead, lift, T&P etc., complete.

Plastering in C.M 1:5, 12 mm thick for wall surfaces including cost of all materials, labour charges, curing, T&P, lead, lift, etc., complete.

Supplying and fabricating and fixing of M.S structural works using ISMC and M.S angle of various sizes for vertical and other supports etc., as directed by the Engineer at site including cost of all materials, labour charges, scaffolding, welding, bolts and nuts if required, lead, lift, etc., complete.

Painting the structural steel work with two coats of enamel paint of approved quality and colour over a coat of primer including cost of all materials, labour charges, scaffolding charges, brushes, lead, lift, etc., complete.

Supplying and fixing of colour coated metal roofing sheet of 0.47mm thick of approved make over M.S Structural frame work with necessary screws including cost of colour coated metal roofing sheet, screws for fixing and all required materials, lead, lift, labour charges, etc, complete.

Supplying, fabricating and fixing in position of MS fully paneled door of double leaf of required size using, 40X40X6mm MS Angles for door frame, 30X30X5mm MS Angles for shutter frame by adopting 5Nos. horizontally, 2Nos. vertically, shutter covered with 18 Gauge MS sheet, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lift, etc., complete.

Supplying and fixing in position of partly glazed mild steel windows of required size using 23x18x18x3mm'Z' section for window main frame, 46x23x20x3mm 'J' sectionfor intermediate frame, 23x18x18x3mm'Z' section for shutter frame with 4 leaves top leaves glazed with 4mm thick plain glass, bottom leaves panaled with M.S sheet of 18gauge with 10mm square bar grill at 100mm c/c, 4 nos of hold fasts, handle pulleys, latches with locking arrangements, including cost of fabrication, transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:1½:3, painting two coats with enamel paint over a coat of primer, cost of all material, labour charges, lead, lift, T&P, etc., complete.

Providing RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site including cost of all materials, labour charges, shuttering, curing lead, lift, etc., complete. but excluding cost of reinforcement. a) For grade beam

Providing RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site including cost of all materials, labour charges, shuttering, curing lead, lift, etc., complete. but excluding cost of reinforcement.b) For lintel beam and Sunshade

Supplying, fabricating and placing in position of steel reinforcement for RCC works as directed by the Engineer at site including cost of steel, binding wire, labour charges for cutting, bending, binding, lead, lift, etc., complete.

Providing two coats of Oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift, etc., complete.

Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, labour, curing, lead, lift, etc., complete.

Providing floor finish with 25mm thick of Granoliothic floor finish in mix 1:1½:3 (one part of cement, one and half part of sand, and two part of chips) using chips of grade 6 to 12mm as directed by the Engineer at site including cost of all materials, labour charges, curing, lead, lift, etc., complete.