ADDN/ALTN TO CERTAIN BLDGS OF 406 GUN MSL REGT UNDER GE WEST DELHI CANTT-10

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as spd & directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) complete all as specified & directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified & directed.

All as per item No. 5 here-in-before but not exceeding 1.5 sqm each.

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coated GI based machine moulded profile ridge/corrugated steel sheet ridge 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified & directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid.

M&L for brick work with sub class 'B' old size bricks in cement mortar 1:6, straight or curved on plan exc 6 m mean radius complete all as specified & directed.

M & L for half brick work with sub-class B brick straight or curved on plan built in cement mortar (1:4) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as spd and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed.

M&L for 15mm thick screed bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L for machine cut kota stone slab flooring 20-22mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing surface complete all as spd & directed.

M&L for 10mm thick rendering on wall in cement mortar 1:4 as backing coat of skirting all as specified and directed

M&L for machine cut kota stone slab 20-22mm thick as in riser of stpes, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing surface complete all as spd & directed.

M&L ready mix plaster 15mm thick on internal wall/concrete surface and finished even and smooth complete all as spd

M&L ready mix plaster 15mm thick on external wall/concrete surface and finished even and smooth complete all as spd

M&L for providing 1mm thick wall care putty on wall surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on old surface all as specified and directed.

M&L for applying two coat of oil bound distemper on new surface all as specified and directed.

Preparing surface by complete removal of existing treatment of wall any layer including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots all as specified and directed.

M&L for priming plastered and other surfaces with alkali resistant priming paint for cement base paint complete all as specified.

M&L for applying two coat cement based paint on plastered /rough cast/old brick wall surface all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate for fixing of hold fast and similar work all as specified and directed.

S&F Factory made 35mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as spd & directed .

S&F factory made 35mm thick 2nd class hard wood glazed / gauged shutters, open, rebated prepared to receive glass , guage etc W/O sash bars for doors as specified in SSR Part I complete all as spd & directed .

S&F mild steel butt hinges 100mm size complete all as spd & directed.

S&F aluminum anodized barrel tower bolts of extruded section of size 150 mm complete all as spd & directed.

S&F aluminum handles cast type anodised of size 150 mm complete all as spd & directed.

S&F aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as spd & directed.

M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as spd & directed .

S&F powder coated (minium thickness of powder coating 50 micron) aluminium section for shutters suitable for three/four track window and aluminium section weighting more than 0.55 kg/m of sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, beading for grill with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron ).

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as spd & directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spd & directed by Engr-in-Charge.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of old steel surface and applying two coat of synthetic enamel paint on roof truss surface and similar work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor or in any position laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Taking up or down 15mm bore steel tubing and connections incl cleaning for refixing or removal to store all as specified.

All as per item No. 47.00 here-in-before but 20mm bore.

All as per item No. 47.00 here-in-before but 25mm bore.

All as per item No. 47.00 here-in-before but 40mm bore.

M&L providing pre cast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in Kitchen slab, passage roof etc and set in cement mortar 1:4 complete all as specified & directed.

M&L for TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S&F for tubes,15mm dia 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

All as per item No. 53.00 here-in-before but 20mm bore tubing.

All as per item No. 53.00 here-in-before but 25mm bore tubing.

All as per item No. 53.00 here-in-before but 40mm bore tubing.

S&F in repairs 15mm dia bib tap fancy type brass with capstan head chromium plated screwed down high pressure with long screwed shank and flynut screwed completeall as specified.

S&F in repairs stop valve 15mm bore fancy type chromium plated, with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs 20mm bore of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling of PVC water storage tanks exc 250 & n.exc 500 ltrs capacity and removing from site all as specified.

S&F rotational moulded HDPE water storage tanks 1000 Ltrs capacity, double layered (cylindrical vertical with closed up) hoisted and fixed in position complete all as specified and directed.

M&L for non skid colour ceramic rectified tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for coloured printed glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:4, complete all as specified.

M&L for Non skid colour ceramic rectified tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L in repairs for 18mm thick Prelaminated particle board exterior grade, prelaminated both sideswith decorative choice lamination fixed wuth screwsto timbe frame work as in kitchen cabinet as per sample complete all as specified.

M&L for teak wood lipping, 6mm thick fixed with nails to 18mm thick veneered particle borad including polishing complete all as specified.

S&F continous (piano) hinges, mild steel, bright finish complete all as specified.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass polished bright finished complete all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified.

M&L for PCC 1:4:8 type D2 40 mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for machine pressed chequered cement concrete coloured tiles 25 mm thick set jointed and pointed in neat cement slurry in floors with gray cement and pigment including 15 mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-

One light/fan/Exhaust fan/bell point controlled by one switch.

All as per item No. 73.00 here in before but for One 5 Amp socket out let independent.

All as per item No. 73.00 here in before but for One 5 Amp socket out let on same board

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 4.0 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of syenthetic enamelled black paint with new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 4.0 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board

S&F switch Piano flush type SP, one way 5 Amps complete all as specified and directed.

S&F switch Piano flush type SP, one way 15 Amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps. complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type complete all as specified and directed.

S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed.

Supply and fixing LED FLAT PANAL Aesthetically designed 2x2 for surface mounting which provides soft-light and glare free symmetrical illumination 34 W complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F single pole MCB 6 to 32 Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.

S&FMCB SPN 40 Amp, 240 v, 50 Hz AC 10 KA ‘C’ curve in self extinguishing thermostat DB complete including taking down old MCBs all as specified.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multi stranded FRLS copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including taking down old unsv/rusted earthing and testing on completion all as specified and directed.

S&F Exhaust fan metallic type ventilating single phase 230/240V of 450mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.

Taking down existing ceiling fan and deposit in MES Yard.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply laying testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminumstranded copper conductor 1100 volt grade crosssectional area 25 Sqmm 2 core LT cable complete all as specified directed

A R construction

Bhasin Construction Co

M/S Yamin

VINAY ENTERPRISES

V M CONSTRUCTION

Vipul Construction

M/s M M BAHL