REPAIR TO INTERNAL PLUMBING, SANITARY FITTINGS, PLASTERING, FLOORING, RAIN WATER PIPE , ROOFING, WALLING AND MISC B / R WORKS AT ME LINE AND COD DEPOT UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 all as specified and as directed.

M&L for Flyash brick work straight or curved on plan exc 6m mean redious built in CM 1:6 all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L for 20mm thk granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry nd pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing rounding to edges of granite stone etc complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 10 above but on skirtings incl 10 mm th rendering in CM (1:3) complete.

M&L for vitrified ceramic coloured tiles 8 to 10mmthk (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.

All as per item No 12 but on skirting over 10 mm th rendering in CM 1:3 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx300x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:3 all as direced.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 30mm thick PCC 1:2:4 type B0 (12.5mm aggregate) as in sub base complete all as specified.

M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block (glossy finish) any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequered Cement Concrete Tiles (glossy finish ) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

Supply only liquid water proofing compound (WPC)

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls over a coat of primer.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M&L One coat of synthetic enamel paint on old painted steel surfaces over 10 cm width or girth incl prepration of surfaces complete

M & L for Preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for prepartion of old plastered surface of wall applying one coat of weatherproof acrylic emulsion exteroir grade paint on external surfaces complete all as specified.

Dismantling asbestos/CGI cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling MS works of any Desc. Not otherwise provided for

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per above above but plain sheet fix in valley gutter / ridge

Labour only for Galvanised, corrugated mild steel sheeting with two corrugations side lap, ridges fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as required all as specified and as directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes , including bolts, if required hooks (stay), heavy, wall ties; plain angle cleats for securing purlins to wood/iron trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE290 gde -e-165 all as specified

M & L for Wire netting of stainless steel wire 0.91mm dia fixed with tinned tacks of stainless steel wire staples of mesh size 25mm

S & F Machine pressed 1.00 mm thick plain, galvanised, mild steel sheeting in valley gutters (Trapezoidal shape), drips and straight clashings (length and girth fixed) with grade of zinc coating 275.

S & F for 2 mm thick poly carbonate transulecent corrugated sheeting with two corrugations side laps fixed with coach screw and washer in roof , wall etc.

Material and labour for running Welding in repairs n.exc 6mm in thickness of Metal to be welded complete all as specified and as directed

S & F in repairs Ball bearing for rolling shutters all as specified and as directed.

M & L for framed work such as grill, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

M & L for Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe-410 gd E-250 quality B

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 Gde E-250

M & L for Closing bolt holes etc. in old corrugated steel sheets or galvalume/asbestos sheeting by sealing with one bitumen and one coach screws/bolts GI washer on either side and 6mm G.I. bolts/screws and nuts, all set in stiff white lead, bolt n exc 25mm in length all as specified and as directed by Engr-in-charge

M & L Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces all as specified and as directed by Engr-in-charge

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer.

M&L for Complete removal of existing paint by grinding,scrapping and applying two coats of synthetic enamelled paint with red oxide primer incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

M & L for complete removal of existing treatment from old plastered surfaces of walls including washing, rubbing down and stopping of old surface applying one coat of Cement base paint, complete all as specified.

Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed.

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per above but 1000 litres.

Disconnecting existing PVC water tanks of capacity exc 250ltr and n exc 500 litres, setting aside (or lowering if required) incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes and for refixing complete all as specified and as directed.

Disconnecting existing PVC water tanks of capacity exc 500 ltr and n.exc 1000 litres, setting aside (or lowering if required) incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes and for refixing complete all as specified and as directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame)exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) n'exc 1.5 Sqm each.

S&F Anodised aluminium window and ventilator including frame,(three track) with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc fabricated using following aluminium anodised sections conforming to catalogue of JINDAL or equivalent make all as specified and directed by Engr-in-charge. (a) Bottom frame 20620 (b) top frame & vertical - 20621 (C) Handle (side) - 20606 (d) Shutter inter lock -20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352 (Note cost of tinted glass & wire cloth shall be included in the quoted rate of item) Complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

Cutting holes in brick walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm aluminium, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No 73 but bore of pipe 20mm

M&L Supplying and laying of 20mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F in repairs Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce.

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests including flushing cistem & fush pipe fixed in repairs .

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat cover, flush pipe, flushing cistern incl all joints complete

M&L in repairs for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F in repair 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S&F in repairs 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F in repairs of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

S & F 10 - 12mm thk polypan PS 20010 Prelam PVC (Hallow profile) sheets used for fixing on wall lining and PVC false ceiling inclusive of necessary fixing at site on PVC frame as per specifications and directed by Engr-in-Charge.

Petty repairs to Aluminium joinery works such as Aluminium Door, Aluminium Windows, Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

All as per item No 101 but 75mm dia pipe with all fittings.

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in cement concrete in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc.

M & L in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

RAMESH PATIL (BID ID -3484951)

DINESH CONSTRUTION (BID ID -3482659)

Santhi Enterprises (BID ID -3484265)

DR J S CHADHA AND SONS (BID ID -3484700)

KARPE AND SONS CONSTRUCTION (BID ID -3482784)

HAWK ENTERPRIESE (BID ID -3481424)